3060500

https://www.phoenixcontact.com/us/products/3060500 Feed-through terminal block - UT 2,5-TWIN/1P BU - 3060500 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, Connection method: Screw/plug-in connection, Number of positions: 1, Cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, Width: 5.2 mm, Color: blue, Mounting type: NS 35/7,5, NS 35/15 Product Features  Plugs with different conductor exit directions (lateral or upwards) enable practical, efficient wiring. This results in a high degree of flexibility, which is required in various areas of application.  Screw flanges for securely latching plugs   Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc Weight per Piece (excluding packing) 11.2 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 3 Nominal cross section 2.5 mm² Color blue Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Pollution degree 3 Overvoltage category III Insulating material group I Connection in acc. with standard IEC 61984 12/01/2015   Page 1 / 4 https://www.phoenixcontact.com/us/products/3060500 Feed-through terminal block - UT 2,5-TWIN/1P BU - 3060500 Technical data General Maximum load current 24 A (In case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.) Nominal current IN 24 A Nominal voltage UN 500 V Open side panel ja Number of positions 1 Dimensions Width 5.2 mm End cover width 2.2 mm Length 55.7 mm Height NS 35/7,5 47.5 mm Height NS 35/15 55 mm Connection data Connection method Screw/plug-in connection Connection in acc. with standard IEC 61984 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 4 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 12/01/2015   Page 2 / 4 https://www.phoenixcontact.com/us/products/3060500 Feed-through terminal block - UT 2,5-TWIN/1P BU - 3060500 Technical data Connection data 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1 mm² Stripping length 9 mm Internal cylindrical gage A3 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Standards and Regulations Connection in acc. with standard IEC 61984 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141117 eCl@ss 4.1 27141117 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 12/01/2015   Page 3 / 4 https://www.phoenixcontact.com/us/products/3060500 Feed-through terminal block - UT 2,5-TWIN/1P BU - 3060500 Approvals Approvals Approvals EAC / EAC Ex Approvals Approvals submitted Approval details EAC  EAC  Drawings Circuit diagram Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/01/2015   Page 4 / 4