3064108

https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Screw connection, number of connections: 2, cross section:0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, color: blue, mounting type: NS 35/7,5, NS 35/15 Why buy this product  The consistent labeling and bridging of terminal blocks is an advantage  Feed-through and PE terminal blocks enable terminal strips of the same shape to be configured with disconnect and knife disconnect terminal blocks Key Commercial Data Packing unit 1 STK Minimum order quantity 50 STK GTIN GTIN 4046356285766 Weight per Piece (excluding packing) 9.600 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 2.5 mm² Color blue Insulating material PA Flammability rating according to UL 94 V0 04/02/2018   Page 1 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Technical data General Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 0.77 W Maximum load current 32 A (with 4 mm² conductor cross section) Nominal current IN 24 A Nominal voltage UN 800 V Open side panel Yes Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 5.2 mm End cover width 2.2 mm Length 57.8 mm Height NS 35/7,5 47.5 mm Height NS 35/15 55 mm Connection data Connection method Screw connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 4 mm² 04/02/2018   Page 2 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Technical data Connection data Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 4 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Stripping length 9 mm Internal cylindrical gage A3 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 04/02/2018   Page 3 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Technical data Environmental Product Compliance For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141117 eCl@ss 4.1 27141117 eCl@ss 5.0 27141126 eCl@ss 5.1 27141126 eCl@ss 6.0 27141126 eCl@ss 7.0 27141126 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000902 ETIM 6.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals 04/02/2018   Page 4 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Approvals Approvals UL Recognized / cUL Recognized / CSA / EAC / EAC / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C mm²/AWG/kcmil 26-12 26-12 Nominal current IN 20 A 20 A Nominal voltage UN 600 V 600 V cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C mm²/AWG/kcmil 26-12 26-12 Nominal current IN 20 A 20 A Nominal voltage UN 600 V 600 V CSA    http://www.csagroup.org/services-industries/product-listing/   B C mm²/AWG/kcmil 26-12 26-12 Nominal current IN 20 A 20 A Nominal voltage UN 600 V 600 V EAC      FILE E 60425  FILE E 60425  13631  7500651.22.01.00246 04/02/2018   Page 5 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Approvals EAC      EAC-Zulassung cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Component plug terminal block Component connector - P-CO 2-5 R47K - 3032447 Component connector, with 47 kOhm resistor for open circuit monitoring, pitch: 5.2 mm, length: 8.9 mm, width: 4.1 mm, height: 34.8 mm, number of positions: 2, color: black     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     04/02/2018   Page 6 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     04/02/2018   Page 7 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     04/02/2018   Page 8 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     04/02/2018   Page 9 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     04/02/2018   Page 10 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories End cover End cover - D-UT 2,5/4-TWIN - 3047141 End cover, length: 56.8 mm, width: 2.2 mm, height: 39.8 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     04/02/2018   Page 11 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-5 - 3030161 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-5 - 3030174 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 14.2 mm, number of positions: 3, color: red     04/02/2018   Page 12 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories Plug-in bridge - FBS 4-5 - 3030187 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 19.4 mm, number of positions: 4, color: red     Plug-in bridge - FBS 5-5 - 3030190 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 24.6 mm, number of positions: 5, color: red     Plug-in bridge - FBS 10-5 - 3030213 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 50.6 mm, number of positions: 10, color: red     Plug-in bridge - FBS 20-5 - 3030226 Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: red     Plug-in bridge - FBS 50-5 - 3038930 Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: red     04/02/2018   Page 13 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories Plug-in bridge - FBSR 2-5 - 3033702 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: red     Plug-in bridge - FBSR 3-5 - 3001591 Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: red     Plug-in bridge - FBSR 4-5 - 3001592 Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: red     Plug-in bridge - FBSR 5-5 - 3001593 Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: red     Plug-in bridge - FBSR 10-5 - 3033710 Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: red     04/02/2018   Page 14 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories Plug-in bridge - FBS 2-5 BU - 3036877 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 3-5 BU - 3036880 Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: blue     Plug-in bridge - FBS 4-5 BU - 3036893 Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-5 BU - 3036903 Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: blue     Plug-in bridge - FBS 10-5 BU - 3036916 Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: blue     04/02/2018   Page 15 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories Plug-in bridge - FBS 20-5 BU - 3036929 Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: blue     Plug-in bridge - FBS 50-5 BU - 3032114 Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: blue     Labeled terminal marker Zack marker strip - ZB 5 CUS - 0824962 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017 Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020     04/02/2018   Page 16 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Marker for terminal blocks - ZB 5,LGS:L1-N,PE - 1050415 Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Marker for terminal blocks - UC-TM 5 CUS - 0824581 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 CUS - 0829595 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm     Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     04/02/2018   Page 17 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories Partition plate Partition plate - ATP-UT-TWIN - 3047183 Partition plate, length: 62.1 mm, width: 2.2 mm, height: 52.5 mm, color: gray     Spacer plate - DP PS-5 - 3036725 Spacer plate, length: 22.4 mm, width: 5.2 mm, height: 29 mm, number of positions: 1, color: red     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm     04/02/2018   Page 18 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories Marker for terminal blocks - UC-TM 5 - 0818108 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver     Test plugs - PS-5 - 3030983 Test plugs, color: red     Test plugs - PS-5/2,3MM RD - 3038723 Test plugs, color: red     04/02/2018   Page 19 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories Test socket Test adapter - PAI-4-FIX-5/6 BU - 3035975 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 OG - 3035974 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 YE - 3035977 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 RD - 3035976 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GN - 3035978 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     04/02/2018   Page 20 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories Test adapter - PAI-4-FIX-5/6 BK - 3035980 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GY - 3035982 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 VT - 3035979 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BN - 3035981 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 WH - 3035983 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     04/02/2018   Page 21 / 22 https://www.phoenixcontact.com/us/products/3064108 Feed-through terminal block - UT 2,5-MTD BU - 3064108 Accessories Test adapter - PAI-4-N GY - 3032871 4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/02/2018   Page 22 / 22