3070121

https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Test disconnect terminal block, With test socket screws for insertion of test plugs, connection method: Screw connection, cross section: 0.2 mm² - 10 mm² , AWG: 24 - 8, width: 8.2 mm, mounting type: NS 35/7,5, NS 35/15, NS 32, color: gray Your advantages  The terminal block provides a function shaft on both sides of the disconnect point and can be fitted with plug-in bridges and test adapters with 4 mm diameter  Compact 1000 V test disconnect terminal block with screw disconnect slide Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356545228 Weight per Piece (excluding packing) 28.400 g Custom tariff number 85369010 Country of origin China Technical data General Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 6 mm² Color gray Insulating material PA 09/10/2019   Page 1 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Technical data General Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.31 W Designation Level 1 above 1 below 1 Maximum load current 57 A (with 10 mm² conductor cross section) Nominal current IN 41 A Nominal voltage UN 1000 V Open side panel Yes Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 8.2 mm End cover width 2.2 mm Length 72.6 mm Height NS 35/7,5 54.3 mm Height NS 35/15 61.8 mm Height NS 32 59.3 mm Connection data Note Terminal point 09/10/2019   Page 2 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Technical data Connection data Connection 1 level Connection method Screw connection Screw thread M4 Stripping length 12 mm Tightening torque, min 1.2 Nm Tightening torque max 1.4 Nm Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 10 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 8 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 10 mm² Min. AWG conductor cross section, flexible 24 Max. AWG conductor cross section, flexible 8 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 2.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 4 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Internal cylindrical gage A5 Standards and Regulations Connection in acc. with standard IEC 60947-7-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 09/10/2019   Page 3 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Technical data Standards and Regulations Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141126 eCl@ss 8.0 27141126 eCl@ss 9.0 27141126 ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000902 ETIM 6.0 EC000902 ETIM 7.0 EC000902 UNSPSC UNSPSC 6.01 30211811 09/10/2019   Page 4 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Classifications UNSPSC UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals KEMA-KEUR / IECEE CB Scheme / EAC Ex Approvals Approval details KEMA-KEUR    http://www.dekra-certification.com     Nominal voltage UN 1000 V Nominal current IN 41 A mm²/AWG/kcmil 0.2-10  71-104969 IECEE CB Scheme    http://www.iecee.org/  NL-37547_A1 EAC      RU CDE.A*30.B.01742 Accessories Accessories Cover profile 09/10/2019   Page 5 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Cover profile - AP-ME METER - 3034361 Cover profile, for covering terminal strips, snapped onto APT-ME cover profile carrier or APH-ME end bracket. A cover profile carrier should be positioned at the ends and at intervals of around 40 cm. Length supplied: 1 m     Cover profile carrier Cover profile carrier - APH-ME - 3034374 Cover profile carrier, for mounting on NS 35/7,5 DIN rail, for fixing the AP-ME cover profile, can be sealed as an option     Cover profile carrier - APT-ME - 3034358 Cover profile carrier for mounting on NS 35/7.5 DIN rail for attaching the cover profile AP-ME     DIN rail DIN rail perforated - NS 32 PERF 2000MM - 1201002 DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015 DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     09/10/2019   Page 6 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     09/10/2019   Page 7 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     09/10/2019   Page 8 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     09/10/2019   Page 9 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - E/UK - 1201442 End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray     09/10/2019   Page 10 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     End cover End cover - D-UT 6-T-HV - 3070147 End cover, length: 72.6 mm, width: 2.2 mm, height: 43.6 mm, color: gray     Jumper Plug-in bridge - FBS 2-8 - 3030284 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-8 - 3030297 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red     Plug-in bridge - FBS 4-8 - 3030307 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red     09/10/2019   Page 11 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Plug-in bridge - FBS 5-8 - 3030310 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red     Plug-in bridge - FBS 6-8 - 3032470 Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: red     Plug-in bridge - FBS 10-8 - 3030323 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red     Plug-in bridge - FBS 1/3-8 - 3032363 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, pin assignment: 1,3, color: red     Plug-in bridge - FBS 1/4-8 - 3032376 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, pin assignment: 1, 4, color: red     09/10/2019   Page 12 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Plug-in bridge - FBS 1/5-8 - 3032381 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, pin assignment: 1,5, color: red     Plug-in bridge - FBS 1/3/5-8 - 3032389 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, pin assignment: 1,3,5, color: red     Plug-in bridge - FBS 1/4/7/10-8 - 3032402 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, pin assignment: 1,4,7,10, color: red     Plug-in bridge - FBSR 2-8 - 3033808 Plug-in bridge, pitch: 8.2 mm, width: 14.8 mm, number of positions: 2, color: red     Plug-in bridge - FBSR 3-8 - 3001597 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red     09/10/2019   Page 13 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Plug-in bridge - FBSR 4-8 - 3000585 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red     Plug-in bridge - FBSR 5-8 - 3033809 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red     Plug-in bridge - FBSR 10-8 - 3001599 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red     Plug-in bridge - FBSR 16-8 - 3033816 Plug-in bridge, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, color: red     Plug-in bridge - FBSR 1/6/11/14-8 - 3033822 Plug-in bridge, non-adjacent, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, pin assignment: 1, 6, 11, 14, color: red     09/10/2019   Page 14 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Plug-in bridge - FBSR 1/6/11/16-8 - 3033820 Plug-in bridge, non-adjacent, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, pin assignment: 1, 6, 11, 16, color: red     Plug-in bridge - FBSR 1/7/13/16-8 - 3033821 Plug-in bridge, non-adjacent, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, pin assignment: 1, 7, 13, 16, color: red     Plug-in bridge - FBS 2-8 CT - 3033830 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: orange     Plug-in bridge - FBS 3-8 CT - 3033831 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: orange     Plug-in bridge - FBS 4-8 CT - 3033832 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: orange     09/10/2019   Page 15 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Plug-in bridge - FBS 10-8 CT - 3033833 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: orange     Plug-in bridge - FBS 2-8 BU - 3032567 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 3-8 BU - 3032570 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: blue     Plug-in bridge - FBS 4-8 BU - 3032583 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-8 BU - 3032596 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: blue     09/10/2019   Page 16 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Plug-in bridge - FBS 6-8 BU - 3032677 Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: blue     Plug-in bridge - FBS 10-8 BU - 3032606 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: blue     Labeled terminal marker Zack marker strip - ZB 8 CUS - 0825011 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 8 CUS - 0824597 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 56     Marker for terminal blocks - UCT-TM 8 CUS - 0829616 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 42     09/10/2019   Page 17 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10     Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10     Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10     Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Partition plate Partition plate - ATP-URTK/SP - 0311139 Partition plate, length: 99 mm, width: 2 mm, height: 64 mm, color: gray     09/10/2019   Page 18 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Partition plate - CARRIER 35-8 - 3034387 Partition plate, width: 8.2 mm, material: PA, length: 99.8 mm, With storage option for FBS...-8 and PAI 4-FIX, color: gray     Separating plate - TS-UK 6-T - 3072820 Separating plate, length: 66.5 mm, width: 1 mm, height: 62.5 mm, color: gray     Spacer plate - DP PS-8 - 3036741 Spacer plate, length: 22.4 mm, width: 8.2 mm, height: 29 mm, number of positions: 1, color: red     Screwdriver tools Screwdriver - SZG 0,9X6,5 VDE - 1205134 Screwdriver, slot-headed, graded, for test socket screws, size: 0.9 x 6.5 x 175 mm, 2-component grip, with non-slip grip     Screwdriver - SZS 1,0X6,5 VDE - 1205079 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip     09/10/2019   Page 19 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Screwdriver - SZS 1,0X4,0 VDE - 1205066 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip     Short-circuit connector Short-circuit connector - FBSRH 2-8 - 3033802 Short-circuit connector, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red     Short-circuit connector - FBSRH 3-8 - 3033803 Short-circuit connector, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red     Short-circuit connector - FBSRH 4-8 - 3033804 Short-circuit connector, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red     Switching jumper Switching jumper - SB-MER 2-8 - 3000587 Switching jumper, pitch: 8.2 mm, length: 24.7 mm, width: 16.4 mm, number of positions: 2, color: gray/orange     09/10/2019   Page 20 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Switching jumper - SB-MER 3-8 - 3000588 Switching jumper, pitch: 8.2 mm, length: 24.7 mm, width: 24.6 mm, number of positions: 3, color: gray/orange     Switching jumper - SB-MER 4-8 - 3000589 Switching jumper, pitch: 8.2 mm, length: 24.7 mm, width: 32.8 mm, number of positions: 4, color: gray/orange     Switching lock Switching lock - S-UT 6-T-HV - 3070150 Switching lock, length: 12 mm, width: 8.2 mm, color: white     Terminal marking Zack marker strip - ZB 8:UNBEDRUCKT - 1052002 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10     09/10/2019   Page 21 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Marker for terminal blocks - UC-TM 8 - 0818072 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 56     Marker for terminal blocks - UCT-TM 8 - 0828740 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 42     Test plug terminal block Test plugs - PS-8 - 3031005 Test plugs, color: red     Test plugs - PS-8/2,3MM RD - 3048564 Test plugs, color: red     Test socket Test adapter - PAI-4-FIX BU - 3032729 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: blue     09/10/2019   Page 22 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Test adapter - PAI-4-FIX OG - 3034455 4 mm test adapter, for terminal blocks with 8.2 mm pitch     Test adapter - PAI-4-FIX YE - 3032745 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: yellow     Test adapter - PAI-4-FIX RD - 3032732 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: red     Test adapter - PAI-4-FIX GN - 3032758 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: green     Test adapter - PAI-4-FIX BK - 3032774 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: black     09/10/2019   Page 23 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Test adapter - PAI-4-FIX GY - 3032790 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: gray     Test adapter - PAI-4-FIX VT - 3032761 Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm ... 8.2 mm pitch, color: violet     Test adapter - PAI-4-FIX BN - 3032787 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: brown     Test adapter - PAI-4-FIX WH - 3032797 4 mm test adapter, for terminal blocks with 8.2 mm pitch     Test adapter - PAIS-4-FIX GY - 3032791 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: gray     09/10/2019   Page 24 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Test adapter - PAIS-4-FIX BK - 3032792 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: black     Test adapter - PAIS-4-FIX RD - 3032793 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: red     Test adapter - PAIS-4-FIX BU - 3032798 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: blue     Test adapter - PAIS-4-FIX YE - 3032799 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: yellow     Test adapter - PAIS-4-FIX GN - 3032801 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: green     09/10/2019   Page 25 / 26 https://www.phoenixcontact.com/us/products/3070121 Test disconnect terminal block - UT 6-T-HV P/P - 3070121 Accessories Test adapter - PAIS-4-FIX VT - 3032802 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: violet     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/10/2019   Page 26 / 26