https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Test disconnect terminal block, connection method: Screw connection, cross section: 0.2 mm² - 10 mm² , AWG:
24 - 8, width: 8.2 mm, mounting type: NS 35/7,5, NS 35/15, NS 32, color: gray
Why buy this product
The terminal block provides a function shaft on both sides of the disconnect point and can be fitted with plug-in bridges and test adapters with 4 mm
diameter
Compact 1000 V test disconnect terminal block with screw disconnect slide
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
50 STK
GTIN
GTIN
4046356545235
Weight per Piece (excluding packing)
26.400 g
Custom tariff number
85369010
Country of origin
China
Technical data
General
Number of levels
1
Number of connections
2
Potentials
1
Nominal cross section
6 mm²
Color
gray
Insulating material
PA
04/02/2018 Page 1 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Technical data
General
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
1.31 W
Maximum load current
57 A (with 10 mm² conductor cross section)
Nominal current IN
41 A
Nominal voltage UN
1000 V
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
2
6 mm / 1.4 kg
10 mm² / 2 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.2 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
6 mm²
Tractive force setpoint
80 N
Conductor cross section tensile test
10 mm²
Tractive force setpoint
90 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 32/NS 35
Setpoint
5N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 6,4 mV
04/02/2018 Page 2 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Technical data
General
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
6 mm²
Short-time current
0.72 kA
Conductor cross section short circuit testing
10 mm²
Short-time current
1.2 kA
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s ) /Hz
Acceleration
3.12 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
04/02/2018 Page 3 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Technical data
General
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
8.2 mm
End cover width
2.2 mm
Length
72.6 mm
Height NS 35/7,5
54.3 mm
Height NS 35/15
61.8 mm
Height NS 32
59.3 mm
Connection data
Note
Terminal point
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
8
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
10 mm²
Min. AWG conductor cross section, flexible
24
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
4 mm²
sleeve, max.
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
Stripping length
12 mm
04/02/2018 Page 4 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Technical data
Connection data
Internal cylindrical gage
A5
Screw thread
M4
Tightening torque, min
1.2 Nm
Tightening torque max
1.4 Nm
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141126
eCl@ss 4.1
27141126
eCl@ss 5.0
27141126
eCl@ss 5.1
27141126
eCl@ss 6.0
27141126
eCl@ss 7.0
27141126
eCl@ss 8.0
27141126
eCl@ss 9.0
27141126
ETIM
ETIM 2.0
EC000902
ETIM 3.0
EC000902
ETIM 4.0
EC000902
04/02/2018 Page 5 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Classifications
ETIM
ETIM 5.0
EC000902
ETIM 6.0
EC000902
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
EAC / EAC / KEMA-KEUR / IECEE CB Scheme
Ex Approvals
Approval details
EAC
EAC-Zulassung
EAC
7500651.22.01.00246
KEMA-KEUR
http://www.dekra-certification.com
2183170.01
mm²/AWG/kcmil
0.2-10
Nominal current IN
41 A
Nominal voltage UN
1000 V
04/02/2018 Page 6 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Approvals
IECEE CB Scheme
http://www.iecee.org/
NL-37547
Accessories
Accessories
Cover profile
Cover profile - AP-ME METER - 3034361
Cover profile, for covering terminal strips, snapped onto APT-ME cover profile carrier or APH-ME end bracket. A cover
profile carrier should be positioned at the ends and at intervals of around 40 cm. Length supplied: 1 m
Cover profile carrier
Cover profile carrier - APH-ME - 3034374
Cover profile carrier, for mounting on NS 35/7,5 DIN rail, for fixing the AP-ME cover profile, can be sealed as an option
Cover profile carrier - APT-ME - 3034358
Cover profile carrier for mounting on NS 35/7.5 DIN rail for attaching the cover profile AP-ME
DIN rail
04/02/2018 Page 7 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
DIN rail perforated - NS 32 PERF 2000MM - 1201002
DIN rail perforated, G profile, width: 32 mm, height: 15 mm, in acc. with EN 60715: 2001, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015
DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, in acc. with EN 60715: 2001, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
04/02/2018 Page 8 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
04/02/2018 Page 9 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
04/02/2018 Page 10 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
04/02/2018 Page 11 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, in acc. with EN 60715: 2001,
material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-UT 6-T-HV - 3070147
End cover, length: 72.6 mm, width: 2.2 mm, height: 43.6 mm, color: gray
Jumper
04/02/2018 Page 12 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Plug-in bridge - FBS 2-8 - 3030284
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-8 - 3030297
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red
Plug-in bridge - FBS 4-8 - 3030307
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-8 - 3030310
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red
Plug-in bridge - FBS 6-8 - 3032470
Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: red
04/02/2018 Page 13 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Plug-in bridge - FBS 10-8 - 3030323
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red
Plug-in bridge - FBS 1/3-8 - 3032363
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, pin assignment: 1,3, color: red
Plug-in bridge - FBS 1/4-8 - 3032376
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, pin assignment: 1, 4, color: red
Plug-in bridge - FBS 1/5-8 - 3032381
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, pin assignment: 1,5, color: red
Plug-in bridge - FBS 1/3/5-8 - 3032389
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, pin assignment: 1,3,5, color: red
04/02/2018 Page 14 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Plug-in bridge - FBS 1/4/7/10-8 - 3032402
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, pin assignment: 1,4,7,10, color: red
Plug-in bridge - FBSR 2-8 - 3033808
Plug-in bridge, pitch: 8.2 mm, width: 14.8 mm, number of positions: 2, color: red
Plug-in bridge - FBSR 3-8 - 3001597
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red
Plug-in bridge - FBSR 4-8 - 3000585
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red
Plug-in bridge - FBSR 5-8 - 3033809
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red
04/02/2018 Page 15 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Plug-in bridge - FBSR 10-8 - 3001599
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red
Plug-in bridge - FBSR 16-8 - 3033816
Plug-in bridge, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, color: red
Plug-in bridge - FBSR 1/6/11/14-8 - 3033822
Plug-in bridge, non-adjacent, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, pin assignment: 1, 6, 11, 14,
color: red
Plug-in bridge - FBSR 1/6/11/16-8 - 3033820
Plug-in bridge, non-adjacent, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, pin assignment: 1, 6, 11, 16,
color: red
Plug-in bridge - FBSR 1/7/13/16-8 - 3033821
Plug-in bridge, non-adjacent, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, pin assignment: 1, 7, 13, 16,
color: red
04/02/2018 Page 16 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Plug-in bridge - FBS 2-8 CT - 3033830
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: orange
Plug-in bridge - FBS 3-8 CT - 3033831
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: orange
Plug-in bridge - FBS 4-8 CT - 3033832
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: orange
Plug-in bridge - FBS 10-8 CT - 3033833
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: orange
Plug-in bridge - FBS 2-8 BU - 3032567
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue
04/02/2018 Page 17 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Plug-in bridge - FBS 3-8 BU - 3032570
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: blue
Plug-in bridge - FBS 4-8 BU - 3032583
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-8 BU - 3032596
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 6-8 BU - 3032677
Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: blue
Plug-in bridge - FBS 10-8 BU - 3032606
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: blue
Labeled terminal marker
04/02/2018 Page 18 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Zack marker strip - ZB 8 CUS - 0825011
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm
Marker for terminal blocks - UC-TM 8 CUS - 0824597
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 8 CUS - 0829616
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm
Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 - 10, 11 - 20, etc. up to 491 - 500, mounting type: snap into tall marker groove, for terminal block width: 8.2
mm, lettering field size: 10.5 x 8.15 mm
Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 - 10, 11 - 20, etc. up to 91 - 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering
field size: 10.5 x 8.15 mm
04/02/2018 Page 19 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x
8.15 mm
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Partition plate
Partition plate - ATP-URTK/SP - 0311139
Partition plate, length: 99 mm, width: 2 mm, height: 64 mm, color: gray
Partition plate - CARRIER 35-8 - 3034387
Partition plate, width: 8.2 mm, material: PA, length: 99.8 mm, With storage option for FBS...-8 and PAI 4-FIX, color: gray
Separating plate - TS-UK 6-T - 3072820
Separating plate, length: 66.5 mm, width: 1 mm, height: 62.5 mm, color: gray
04/02/2018 Page 20 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Spacer plate - DP PS-8 - 3036741
Spacer plate, length: 22.4 mm, width: 8.2 mm, height: 29 mm, number of positions: 1, color: red
Screwdriver tools
Screwdriver - SZG 0,9X6,5 VDE - 1205134
Screwdriver, slot-headed, graded, for test socket screws, size: 0.9 x 6.5 x 175 mm, 2-component grip, with non-slip grip
Screwdriver - SZS 1,0X6,5 VDE - 1205079
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip
Screwdriver - SZS 1,0X4,0 VDE - 1205066
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Short-circuit connector
04/02/2018 Page 21 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Short-circuit connector - FBSRH 2-8 - 3033802
Short-circuit connector, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red
Short-circuit connector - FBSRH 3-8 - 3033803
Short-circuit connector, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red
Short-circuit connector - FBSRH 4-8 - 3033804
Short-circuit connector, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red
Switching jumper
Switching jumper - SB-MER 2-8 - 3000587
Switching jumper, pitch: 8.2 mm, length: 24.7 mm, width: 16.4 mm, number of positions: 2, color: gray/orange
Switching jumper - SB-MER 3-8 - 3000588
Switching jumper, pitch: 8.2 mm, length: 24.7 mm, width: 24.6 mm, number of positions: 3, color: gray/orange
04/02/2018 Page 22 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Switching jumper - SB-MER 4-8 - 3000589
Switching jumper, pitch: 8.2 mm, length: 24.7 mm, width: 32.8 mm, number of positions: 4, color: gray/orange
Switching lock
Switching lock - S-UT 6-T-HV - 3070150
Switching lock, length: 12 mm, width: 8.2 mm, color: white
Terminal marking
Zack marker strip - ZB 8:UNBEDRUCKT - 1052002
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm
Marker for terminal blocks - UC-TM 8 - 0818072
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size:
7.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 8 - 0828740
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into tall marker groove, for
terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm
04/02/2018 Page 23 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Test plug terminal block
Test plugs - PS-8 - 3031005
Test plugs, color: red
Test plugs - PS-8/2,3MM RD - 3048564
Test plugs, color: red
Test socket
Test adapter - PAI-4-FIX BU - 3032729
Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm to 8.2 mm pitch, color: blue
Test adapter - PAI-4-FIX OG - 3034455
4 mm test adapter, for terminal blocks with 8.2 mm pitch
04/02/2018 Page 24 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Test adapter - PAI-4-FIX YE - 3032745
Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm to 8.2 mm pitch, color: yellow
Test adapter - PAI-4-FIX RD - 3032732
Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm to 8.2 mm pitch, color: red
Test adapter - PAI-4-FIX GN - 3032758
Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm to 8.2 mm pitch, color: green
Test adapter - PAI-4-FIX BK - 3032774
Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm to 8.2 mm pitch, color: black
Test adapter - PAI-4-FIX GY - 3032790
Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm to 8.2 mm pitch, color: gray
04/02/2018 Page 25 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Test adapter - PAI-4-FIX VT - 3032761
Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm to 8.2 mm pitch, color: violet
Test adapter - PAI-4-FIX BN - 3032787
Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm to 8.2 mm pitch, color: brown
Test adapter - PAI-4-FIX WH - 3032797
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAIS-4-FIX GY - 3032791
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: gray
Test adapter - PAIS-4-FIX BK - 3032792
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: black
04/02/2018 Page 26 / 28
https://www.phoenixcontact.com/us/products/3070134
Test disconnect terminal block - UT 6-T-HV - 3070134
Accessories
Test adapter - PAIS-4-FIX RD - 3032793
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: red
Test adapter - PAIS-4-FIX BU - 3032798
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: blue
Test adapter - PAIS-4-FIX YE - 3032799
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: yellow
Test adapter - PAIS-4-FIX GN - 3032801
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: green
Test adapter - PAIS-4-FIX VT - 3032802
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: violet
04/02/2018 Page 27 / 28
https://www.phoenixcontact.com/us/products/3070134
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
04/02/2018 Page 28 / 28
