https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Test disconnect terminal block, connection method: Screw connection with spring support, cross section: 0.2 mm²
- 10 mm² , AWG: 24 - 10, width: 8.2 mm, mounting type: NS 35/7,5, NS 35/15, NS 32, color: gray
Why buy this product
Can be fitted on both sides with fixed bridges as well as test sockets with 4 mm diameter
Terminal block and accessories are touch proof according to BGV A2
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
50 STK
GTIN
GTIN
4046356543125
Weight per Piece (excluding packing)
26.000 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
1
Number of connections
2
Nominal cross section
6 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
07/15/2018 Page 1 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Technical data
General
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
1.31 W
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
41 A
Maximum load current
57 A (with 10 mm² conductor cross section)
Nominal voltage UN
500 V (up to 690 V for pollution degree II)
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
7.3 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
2
6 mm / 1.4 kg
10 mm² / 2 kg
2.5 mm² / 0.7 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.2 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
6 mm²
Tractive force setpoint
80 N
Conductor cross section tensile test
10 mm²
Tractive force setpoint
90 N
Conductor cross section tensile test
2.5 mm²
Tractive force setpoint
50 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35/NS 32
Setpoint
5N
07/15/2018 Page 2 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Technical data
General
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
6 mm²
Short-time current
0.72 A
Conductor cross section short circuit testing
10 mm²
Short-time current
1.2 kA
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s ) /Hz
Acceleration
0,8 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
07/15/2018 Page 3 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Technical data
General
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Length
82 mm
Width
8.2 mm
Height NS 35/7,5
52 mm
Height NS 35/15
59.5 mm
Height NS 32
57 mm
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
4 mm²
sleeve, max.
Connection method
Screw connection with spring support
Stripping length
12 mm
Internal cylindrical gage
A5
Screw thread
M4
Tightening torque, min
1.5 Nm
07/15/2018 Page 4 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Technical data
Connection data
Tightening torque max
1.8 Nm
Disconnect element
M3 0.6 Nm 0.8 Nm
Standards and Regulations
Connection in acc. with standard
CUL
IEC 60947-7-1
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141126
eCl@ss 4.1
27141126
eCl@ss 5.0
27141126
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141126
eCl@ss 8.0
27141126
eCl@ss 9.0
27141126
ETIM
ETIM 2.0
EC000902
ETIM 3.0
EC000902
ETIM 4.0
EC000902
07/15/2018 Page 5 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Classifications
ETIM
ETIM 5.0
EC000902
ETIM 6.0
EC000902
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / EAC / CSA / cULus Recognized
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
D
B
C
Nominal voltage UN
600 V
300 V
300 V
Nominal current IN
5A
30 A
30 A
mm²/AWG/kcmil
24-10
24-10
24-10
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
D
B
C
Nominal voltage UN
600 V
300 V
300 V
Nominal current IN
5A
30 A
30 A
mm²/AWG/kcmil
24-10
24-10
24-10
FILE E 60425
FILE E 60425
07/15/2018 Page 6 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Approvals
EAC
EAC-Zulassung
CSA
http://www.csagroup.org/services-industries/product-listing/
13631
D
B
C
Nominal voltage UN
600 V
300 V
300 V
Nominal current IN
5A
30 A
30 A
mm²/AWG/kcmil
24-10
24-10
24-10
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
Connector
Cable lug - C-BCI 1,5/2,8 - 3240015
Flat pin cable lug, with tab, soldered neck, red, 0.5 ... 1.5 mm², pin width: 2.8 mm, easy conductor entry with Easy-Entry,
for horizontal and vertical crimping with CRIMPFOX-RCI 6
Cable lug - C-BCI 1,5/4,6 - 3240568
Flat pin cable lug, with tab, soldered neck, red, 0.5 ... 1.5 mm², pin width: 4.6 mm, easy conductor entry with Easy-Entry,
for horizontal and vertical crimping with CRIMPFOX-RCI 6
07/15/2018 Page 7 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Accessories
Cable lug - C-BCI 2,5/2,8 - 3240046
Flat pin cable lug, with tab, soldered neck, blue, 1.5 ... 2.5 mm², pin width: 2.8 mm, easy conductor entry with Easy-Entry,
for horizontal and vertical crimping with CRIMPFOX-RCI 6
Cable lug - C-BCI 2,5/4,6 - 3240569
Flat pin cable lug, with tab, soldered neck, blue, 1.5 ... 2.5 mm², pin width: 4.6 mm, easy conductor entry with Easy-Entry,
for horizontal and vertical crimping with CRIMPFOX-RCI 6
Cable lug - C-BCI 6/2,8 SO - 3240057
Flat pin cable lug, with tab, soldered neck, yellow, 4 ... 6 mm², pin width: 2.8 mm, easy conductor entry with Easy-Entry,
for horizontal and vertical crimping with CRIMPFOX-RCI 6
Cable lug - C-BCI 6/4,6 SO - 3240067
Flat pin cable lug, with tab, soldered neck, yellow, 4 ... 6 mm², pin width: 4.6 mm, easy conductor entry with Easy-Entry,
for horizontal and vertical crimping with CRIMPFOX-RCI 6
Crimping tool
Crimping pliers - CRIMPFOX-RCI 6 - 1212057
Crimping pliers, for insulated cable lugs, 0.5 mm² ... 6.0 mm² (red, blue, yellow), oval crimp, symmetrical
07/15/2018 Page 8 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Accessories
DIN rail
DIN rail perforated - NS 32 PERF 2000MM - 1201002
DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015
DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: white
07/15/2018 Page 9 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Accessories
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
07/15/2018 Page 10 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Accessories
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: white
07/15/2018 Page 11 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Accessories
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
07/15/2018 Page 12 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Accessories
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
07/15/2018 Page 13 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Accessories
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-USST 6-T - 3070367
End cover, length: 82 mm, width: 2.2 mm, height: 41.7 mm, color: gray
End cover - D-USST 6-T CS - 3070369
End cover, with lateral openings for cable lugs, can also be used as partition plate, length: 82 mm, width: 2.2 mm,
height: 41.7 mm, color: gray
Labeled terminal marker
Zack marker strip - ZB 8 CUS - 0825011
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm
Marker for terminal blocks - UC-TM 8 CUS - 0824597
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm
07/15/2018 Page 14 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Accessories
Marker for terminal blocks - UCT-TM 8 CUS - 0829616
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm
Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 - 10, 11 - 20, etc. up to 491 - 500, mounting type: snap into tall marker groove, for terminal block width: 8.2
mm, lettering field size: 10.5 x 8.15 mm
Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 - 10, 11 - 20, etc. up to 91 - 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering
field size: 10.5 x 8.15 mm
Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x
8.15 mm
Partition plate
Partition plate - ATP-URTK/SP - 0311139
Partition plate, length: 99 mm, width: 2 mm, height: 64 mm, color: gray
07/15/2018 Page 15 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Accessories
Separating plate - TS-UT 6-T/SP - 3072821
Separating plate, length: 105.2 mm, width: 1 mm, height: 67.5 mm, color: gray
Screw bridge
Fixed bridge - FBRI 10-8 N - 2772080
Fixed bridge, pitch: 8.2 mm, number of positions: 10, color: silver
Screwdriver tools
Screwdriver - SZS 1,0X4,0 VDE - 1205066
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Short-circuit connector
07/15/2018 Page 16 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Accessories
Short-circuit connector - KSS 8 - 0311540
Short-circuit connector, pitch: 8 mm, number of positions: 2, color: black
Short-circuit connector - KSS 4- 8 - 0309549
Short-circuit connector, pitch: 8 mm, number of positions: 4, color: black
Switching lock
Switching lock - S-URTK/SP - 0311155
Switching lock, length: 12 mm, width: 8.2 mm, color: white
Terminal marking
Zack marker strip - ZB 8:UNBEDRUCKT - 1052002
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm
Marker for terminal blocks - UC-TM 8 - 0818072
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR,
BLUEMARK CLED, BLUEMARK LED, CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for
terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm
07/15/2018 Page 17 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Accessories
Marker for terminal blocks - UCT-TM 8 - 0828740
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK ID, BLUEMARK ID COLOR, BLUEMARK CLED, BLUEMARK LED, TOPMARK NEO, mounting
type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm
Test socket
Female test connector - PSBJ-URTK 6 FARBLOS - 3026450
Female test connector, color: transparent
Female test connector - PSBJ-URTK 6 RD - 3026719
Female test connector, color: red
Female test connector - PSBJ-URTK 6 BU - 3026434
Female test connector, color: blue
Female test connector - PSBJ-URTK 6 YE - 3026405
Female test connector, color: yellow
07/15/2018 Page 18 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Accessories
Female test connector - PSBJ-URTK 6 GN - 3026418
Female test connector, color: green
Female test connector - PSBJ-URTK 6 VT - 3026421
Female test connector, color: violet
Female test connector - PSBJ-URTK 6 GY - 3026612
Female test connector, color: gray
Female test connector - PSBJ-URTK 6 BK - 3026447
Female test connector, color: black
Female test connector - PSBJ-URTK 6 BN - 3026971
Female test connector, color: brown
07/15/2018 Page 19 / 20
https://www.phoenixcontact.com/us/products/3070312
Test disconnect terminal block - USST 6-T - 3070312
Accessories
Female test connector - PSBJ-URTK 6 WH - 3026448
Female test connector, color: white
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
07/15/2018 Page 20 / 20
