https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Feed-through terminal block, Connection method: Screw connection with spring support, Cross section: 0.5
mm² - 16 mm², AWG: 20 - 6, Width: 10.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15, NS 32
Key commercial data
Packing unit
11
Minimum order quantity
50 1
Weight per Piece (excluding packing)
21.23 GRM
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
1
Number of connections
2
Color
gray
Insulating material
PA
Inflammability class according to UL 94
V0
Maximum load current
76 A (with 16 mm² conductor cross section)
Rated surge voltage
6 kV
Pollution degree
3
Surge voltage category
III
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
57 A
Nominal voltage UN
500 V
Open side panel
ja
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
01.11.2013 Page 1 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Technical data
General
Back of the hand protection
guaranteed
Finger protection
guaranteed
Surge voltage test setpoint
7.3 kV
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of power-frequency withstand voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor
connection)
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
10 mm² / 2 kg
16 mm² / 2.9 kg
2.5 mm² / 0.7 kg
Result of bending test
Test passed
Conductor cross section tensile test
0.5 mm²
Tractive force setpoint
30 N
Conductor cross section tensile test
10 mm²
Tractive force setpoint
90 N
Conductor cross section tensile test
16 mm²
Tractive force setpoint
100 N
Tensile test result
Test passed
Tight fit on carrier
NS 35/NS 32
Setpoint
5N
Result of tight fit test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of voltage drop test
Test passed
Temperature-rise test
Test passed
Conductor cross section short circuit testing
10 mm²
Short-time current
1.2 kA
Conductor cross section short circuit testing
16 mm²
Short-time current
1.92 kA
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
01.11.2013 Page 2 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Technical data
General
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
0.02 g²/Hz
Acceleration
0.8 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Temperature index, insulating material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Dimensions
Width
10.2 mm
Length
52 mm
Height NS 35/7,5
57.3 mm
Height NS 35/15
64.8 mm
Height NS 32
62.3 mm
Connection data
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
16 mm²
Conductor cross section AWG/kcmil min.
20
Conductor cross section AWG/kcmil max
6
Conductor cross section stranded min.
0.5 mm²
Conductor cross section stranded max.
10 mm²
Min. AWG conductor cross section, stranded
20
Max. AWG conductor cross section, stranded
8
Conductor cross section stranded, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max.
10 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid min.
0.5 mm²
2 conductors with same cross section, solid max.
4 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
01.11.2013 Page 3 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Technical data
Connection data
2 conductors with same cross section, stranded max.
4 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
6 mm²
sleeve, max.
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
2.5 mm²
Cross section with insertion bridge, solid max.
10 mm²
Cross section with insertion bridge, stranded max.
10 mm²
Connection method
Screw connection with spring support
Stripping length
12 mm
Internal cylindrical gage
B6
Screw thread
M4
Tightening torque, min
1.5 Nm
Tightening torque max
1.8 Nm
Classifications
eCl@ss
eCl@ss 4.0
27141120
eCl@ss 4.1
27141120
eCl@ss 5.0
27141120
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
ETIM
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
01.11.2013 Page 4 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Classifications
UNSPSC
UNSPSC 13.2
39121410
Accessories
Accessories
Bridge
Fixed bridge - FBI 2-10 - 0203483
Fixed bridge, Number of positions: 2, Color: silver
Fixed bridge - FBI 10-10 - 0203276
Fixed bridge, Number of positions: 10, Color: silver
Insertion bridge - EB 2-10 - 0203153
Insertion bridge, Number of positions: 2, Color: gray
Insertion bridge - EB 3-10 - 0203328
Insertion bridge, Number of positions: 3, Color: gray
01.11.2013 Page 5 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Accessories
Insertion bridge - EB 10-10 - 0203137
Insertion bridge, Number of positions: 10, Color: gray
Step bracket - STL 10N/5N - 0204110
Step bracket, Number of positions: 2, Color: aluminum
Connector
Cable lug - C-BCI 1,5/2,8 - 3240015
Flat pin cable lug, red, 0.5 - 1.5 mm²,
Cable lug - C-BCI 1,5/4,6 - 3240568
Flat pin cable lug, red, 0.5 - 1.5 mm²,
Cable lug - C-BCI 2,5/2,8 - 3240046
Flat pin cable lug, blue, 1.5 - 2.5 mm²,
01.11.2013 Page 6 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Accessories
Cable lug - C-BCI 2,5/4,6 - 3240569
Flat pin cable lug, blue, 1.5 - 2.5 mm²,
Cable lug - C-BCI 6/2,8 - 3240047
Flat pin cable lug, yellow, 4 - 6 mm²,
Cable lug - C-BCI 6/4,6 - 3240570
Flat pin cable lug, yellow, 4 - 6 mm²,
Crimping tool
Crimping pliers - CRIMPFOX-RCI 6 - 1212057
Crimping pliers, for insulated cable lugs, 0.75 - 6.0 mm² (red, blue, yellow), oval crimp, symmetrical
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
01.11.2013 Page 7 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Accessories
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-USST 4/10 - 3070370
End cover, Length: 52 mm, Width: 2.2 mm, Color: gray
01.11.2013 Page 8 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Accessories
Insulating sleeve
Jumper - ISSBI 10-10 - 0301521
Jumper, Number of positions: 10, Color: silver
Mounting rail
DIN rail - NS 32 PERF 2000MM - 1201002
G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m
DIN rail - NS 32 UNPERF 2000MM - 1201015
G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
01.11.2013 Page 9 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Accessories
DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
01.11.2013 Page 10 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Accessories
DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
01.11.2013 Page 11 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Accessories
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
01.11.2013 Page 12 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Accessories
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
Partition plate
Separating plate - TPNS-UK - 0706647
Separating plate, Length: 80 mm, Width: 2 mm, Height: 70 mm, Color: gray
Separating plate - TS-USST 4/10 - 3070383
Separating plate, Length: 12.4 mm, Width: 2.2 mm, Color: gray
Screwdriver tools
Screwdriver - SZS 1,0X4,0 VDE - 1205066
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
01.11.2013 Page 13 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Accessories
Test socket
Female test connector - PSBJ 4/15/6 FARBLOS - 0303419
Female test connector, Color: transparent
Female test connector - PSBJ 4/15/6 WH - 0303312
Female test connector, Color: white
Female test connector - PSBJ 4/15/6 RD - 0303325
Female test connector, Color: red
Female test connector - PSBJ 4/15/6 BU - 0303354
Female test connector, Color: blue
Female test connector - PSBJ 4/15/6 YE - 0303367
Female test connector, Color: yellow
01.11.2013 Page 14 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Accessories
Female test connector - PSBJ 4/15/6 GN - 0303370
Female test connector, Color: green
Female test connector - PSBJ 4/15/6 VT - 0303383
Female test connector, Color: violet
Female test connector - PSBJ 4/15/6 GY - 0303396
Female test connector, Color: gray
Female test connector - PSBJ 4/15/6 BK - 0303406
Female test connector, Color: black
Female test connector - PSB 4/7/6 - 0303299
Female test connector, Color: silver
Drawings
01.11.2013 Page 15 / 16
https://www.phoenixcontact.com/us/products/3070354
Feed-through terminal block - USST 10 - 3070354
Circuit diagram
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com
01.11.2013 Page 16 / 16
