3071357

https://www.phoenixcontact.com/us/products/3071357 Trunk line branch terminal - UDB 2X25/16 BN - 3071357 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Trunk line branch terminal, nom. voltage: 400 V, nominal current: 101 A, connection method: Screw connection, Screw connection, number of connections: 4, number of positions: 1, cross section: 1.5 mm² - 25 mm², AWG: 8 - 2, width: 23 mm, color: brown, mounting type: NS 35/7,5, NS 35/15 Your advantages  The branch terminal is suitable for the simple voltage pick-off of main supply cables  Conformance with DIN VDE 0603‑2/EN 60998‑1 Key Commercial Data Packing unit 1 pc Minimum order quantity 5 pc GTIN GTIN 4046356736022 Weight per Piece (excluding packing) 52.000 g Custom tariff number 85369010 Country of origin Germany Technical data General Number of positions 1 Number of levels 1 Number of connections 4 Potentials 1 Nominal cross section 25 mm² Color brown Insulating material PA 05/18/2020   Page 1 / 10 https://www.phoenixcontact.com/us/products/3071357 Trunk line branch terminal - UDB 2X25/16 BN - 3071357 Technical data General Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 3.26 W Maximum load current 101 A Nominal current IN 101 A Nominal voltage UN 400 V (max. 1000 V) Open side panel No Ambient temperature (operation) -60 °C ... 85 °C Ambient temperature (storage/transport) -25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C) Moisture, minimum (storage/transport) 30 % Moisture, maximum (storage/transport) 70 % Ambient temperature (assembly) -5 °C ... 70 °C Ambient temperature (actuation) -5 °C ... 70 °C Dimensions Width 23 mm Length 46 mm Height NS 35/7,5 42 mm Height NS 35/15 49.5 mm Connection data Connection 1 level Connection method Screw connection Screw thread M5/M6 Stripping length 16 mm Tightening torque, min 2.2 Nm Tightening torque max 2.5 Nm Connection in acc. with standard IEC 60998-1 Note Use ferrules for stranded conductors Conductor cross section solid min. 1.5 mm² Conductor cross section solid max. 25 mm² Conductor cross section AWG min. 8 Conductor cross section AWG max. 2 Conductor cross section flexible min. 10 mm² Conductor cross section flexible max. 16 mm² 05/18/2020   Page 2 / 10 https://www.phoenixcontact.com/us/products/3071357 Trunk line branch terminal - UDB 2X25/16 BN - 3071357 Technical data Connection data Min. AWG conductor cross section, flexible 8 Max. AWG conductor cross section, flexible 3 Conductor cross section flexible, with ferrule without plastic sleeve min. 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 16 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 10 mm² Connection 2nd level Connection method Screw connection Stripping length 16 mm Connection in acc. with standard IEC 60998-1 Tightening torque, min 1.7 Nm Tightening torque max 2 Nm Conductor cross section solid min. 1.5 mm² Conductor cross section solid max. 16 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 10 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm² Standards and Regulations Connection in acc. with standard IEC 60998-1 IEC 60998-1 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Circuit diagram 05/18/2020   Page 3 / 10 https://www.phoenixcontact.com/us/products/3071357 Trunk line branch terminal - UDB 2X25/16 BN - 3071357 Classifications eCl@ss eCl@ss 10.0.1 27141120 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141190 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals EAC Ex Approvals 05/18/2020   Page 4 / 10 https://www.phoenixcontact.com/us/products/3071357 Trunk line branch terminal - UDB 2X25/16 BN - 3071357 Approvals Approval details EAC      RU CDE.A*30.B.01742 Accessories Accessories Crimping tool Crimping pliers - CRIMPFOX 25R - 1212039 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 10 mm² ... 25 mm², lateral entry, WM crimp     Crimping pliers - CRIMPFOX 6T-F - 1212038 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6 mm², front entry, trapezoidal crimp     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     05/18/2020   Page 5 / 10 https://www.phoenixcontact.com/us/products/3071357 Trunk line branch terminal - UDB 2X25/16 BN - 3071357 Accessories DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     05/18/2020   Page 6 / 10 https://www.phoenixcontact.com/us/products/3071357 Trunk line branch terminal - UDB 2X25/16 BN - 3071357 Accessories DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     05/18/2020   Page 7 / 10 https://www.phoenixcontact.com/us/products/3071357 Trunk line branch terminal - UDB 2X25/16 BN - 3071357 Accessories DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     05/18/2020   Page 8 / 10 https://www.phoenixcontact.com/us/products/3071357 Trunk line branch terminal - UDB 2X25/16 BN - 3071357 Accessories End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     05/18/2020   Page 9 / 10 https://www.phoenixcontact.com/us/products/3071357 Trunk line branch terminal - UDB 2X25/16 BN - 3071357 Accessories Screwdriver tools Philips screwdriver - SF-PZSL 1-80 S-VDE - 1212699 Screwdriver, Plus-Minus PZH slot, VDE-isolated, size: PZ 1 x 80, two component handle, with non-slip grip     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 05/18/2020   Page 10 / 10