https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, connection method: Screw connection, cross section: 0.5 mm² - 10 mm² , AWG: 20
- 10, width: 8.2 mm, mounting type: NS 35/7,5, NS 35/15, NS 32, color: gray
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4046356773041
Weight per Piece (excluding packing)
18.800 g
Custom tariff number
85369010
Country of origin
India
Technical data
General
Number of levels
1
Number of connections
2
Potentials
1
Nominal cross section
6 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
06/26/2020 Page 1 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Technical data
General
Insulating material group
I
Maximum power dissipation for nominal condition
1.31 W
Maximum load current
57 A (with 10 mm² conductor cross section)
Nominal current IN
41 A
Nominal voltage UN
800 V
Open side panel
Yes
Ambient temperature (operation)
-60 °C ... 85 °C
Ambient temperature (storage/transport)
-25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
8.2 mm
End cover width
2.2 mm
Length
66.5 mm
Height NS 35/7,5
48 mm
Height NS 35/15
55.5 mm
Height NS 32
53 mm
Connection data
Note
Terminal point
Connection
1 level
Connection method
Screw connection
06/26/2020 Page 2 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Technical data
Connection data
Screw thread
M4
Stripping length
10 mm
Tightening torque, min
1.5 Nm
Tightening torque max
1.6 Nm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section AWG min.
20
Conductor cross section AWG max.
8
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
6 mm²
Min. AWG conductor cross section, flexible
20
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid min.
0.5 mm²
2 conductors with same cross section, solid max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
2 conductors with same cross section, stranded max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules,
with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules,
with plastic sleeve, maximum
4 mm²
Two conductors with the same cross section stranded, with ferrule and
without plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and
without plastic sleeve, maximum
2.5 mm²
Internal cylindrical gage
A5
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Flammability rating according to UL 94
V0
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
06/26/2020 Page 3 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Technical data
Environmental Product Compliance
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 10.0.1
27141120
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 3.0
EC000902
ETIM 4.0
EC000902
ETIM 5.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
06/26/2020 Page 4 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Classifications
UNSPSC
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized
Ex Approvals
Approval details
CSA
http://www.csagroup.org/services-industries/product-listing/
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
30 A
30 A
mm²/AWG/kcmil
26-8
26-8
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
30 A
30 A
mm²/AWG/kcmil
26-8
26-8
cUL Recognized
13631
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
30 A
30 A
FILE E 60425
FILE E 60425
06/26/2020 Page 5 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Approvals
B
C
mm²/AWG/kcmil
26-8
26-8
EAC
EAC-Zulassung
EAC
RU CDE.BL08.B.00534
cULus Recognized
Accessories
Accessories
Cover profile
Cover profile - AP 3 CM - 5022876
Cover profile for covering terminal strips, snaps onto AP 3-TU, AP 3-TNS 35 cover profile carriers, can be labeled with
AP-ES insert strip. A cover profile carrier is to be positioned at the ends and at intervals of around approx. 40 cm. Supply
length: As per customer order
Cover profile - AP 3 METER - 5022643
Cover profile, for covering terminal strips, snaps onto cover profile carrier AP 3-TU, AP 3-TNS 35, can be marked with
insert strip AP-ES. Cover profile carriers should be placed at the ends and at intervals of approx. 40 cm. Length: 1 m
Cover profile carrier
06/26/2020 Page 6 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
Cover profile carrier - AP 3-TU - 5022656
Cover profile carrier for mounting on NS 32 or NS 35/7.5 DIN rail for attaching the cover profile AP 3.2 mm thick
Cover - AP 3-TNS 35 - 5022672
Sealable cover profile, for mounting on NS 35/7.5 DIN rail and for fixing the cover profile AP 3, with plastic knurled nut
M5, space requirement: 13 mm
DIN rail
DIN rail perforated - NS 32 PERF 2000MM - 1201002
DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015
DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
06/26/2020 Page 7 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
06/26/2020 Page 8 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
06/26/2020 Page 9 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
06/26/2020 Page 10 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
06/26/2020 Page 11 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-UK 6-T - 3072802
End cover, length: 66.5 mm, width: 2.2 mm, height: 37.9 mm, color: gray
Labeled terminal marker
Zack marker strip - ZB 8 CUS - 0825011
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
06/26/2020 Page 12 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
Marker for terminal blocks - UC-TM 8 CUS - 0824597
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual
labels: 56
Marker for terminal blocks - UCT-TM 8 CUS - 0829616
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual
labels: 42
Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 8.2
mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm,
lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x
8.15 mm, Number of individual labels: 10
Partition plate
06/26/2020 Page 13 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
Separating plate - TS-UK 6-T - 3072820
Separating plate, length: 66.5 mm, width: 1 mm, height: 62.5 mm, color: gray
Screw bridge
Screw bridge - SCBI 10-8,15 - 3245134
Screw bridge, with insulating collar, pitch: 8.2 mm, number of positions: 10, color: silver
Isolator bridge bar - SCBI 10-8,15 ISO - 3000417
Isolator bridge bar, for switchable cross bridges, with insulating collar, pitch: 8.2 mm, number of positions: 10, color: silver
Screwdriver tools
Screwdriver - SZS 1,0X4,0 VDE - 1205066
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
06/26/2020 Page 14 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
Short-circuit connector
Short-circuit connector - KSS 8 - 0311540
Short-circuit connector, pitch: 8 mm, number of positions: 2, color: black
Short-circuit connector - KSSI 2-8 - 3000722
Short-circuit connector, pitch: 8 mm, length: 11 mm, width: 16.2 mm, number of positions: 2, color: black
Short-circuit connector - KSSI 4-8 - 3000735
Short-circuit connector, pitch: 8 mm, number of positions: 4, color: black
Switching jumper
Switching jumper - SB 6-T 2-8 - 3075842
Switching jumper, pitch: 8 mm, number of positions: 2, color: orange
06/26/2020 Page 15 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
Switching jumper - SB 6-T 3-8 - 3075843
Switching jumper, pitch: 8 mm, number of positions: 3, color: orange
Switching jumper - SB 6-T 4-8 - 3075844
Switching jumper, pitch: 8 mm, number of positions: 4, color: orange
Switching jumper - SB 6-T 10-8 - 3075846
Switching jumper, pitch: 8 mm, number of positions: 10, color: orange
Switching jumper - SBP 6-T 2-8 - 3070321
Switching jumper, with test socket, pitch: 8.2 mm, number of positions: 2, color: orange
Switching jumper - SBP 6-T 3-8 - 3070322
Switching jumper, with test socket, pitch: 8.2 mm, number of positions: 3, color: orange
06/26/2020 Page 16 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
Switching jumper - SBP 6-T 4-8 - 3070323
Switching jumper, with test socket, pitch: 8.2 mm, number of positions: 4, color: orange
Switching jumper - SB 1/3/5/7-8-T - 3075845
Switching jumper, number of positions: 7, pin assignment: 1, 3, 5, 7, color: orange
Switching jumper - SB 1/3/5/7-8-T - 3075845
Switching jumper, number of positions: 7, pin assignment: 1, 3, 5, 7, color: orange
Terminal marking
Zack marker strip - ZB 8:UNBEDRUCKT - 1052002
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels:
10
Marker for terminal blocks - UC-TM 8 - 0818072
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 56
06/26/2020 Page 17 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
Marker for terminal blocks - UCT-TM 8 - 0828740
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size:
7.6 x 10.5 mm, Number of individual labels: 42
Test plug terminal block
Female test connector - PSBJ 6-T GY - 3070316
Female test connector, color: gray
Female test connector - PSBJ 6-T BN - 3070317
Female test connector, color: brown
Female test connector - PSBJ 6-T BK - 3070318
Female test connector, color: black
Female test connector - PSBJ 6-T RD - 3070319
Female test connector, color: red
06/26/2020 Page 18 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
Female test connector - PSBJ 6-T OG - 3070320
Female test connector, color: orange
Female test connector - PSBJ 6-T WH - 3070324
Female test connector, color: white
Female test connector - PSBJ 6-T YE - 3070326
Female test connector, color: yellow
Female test connector - PSBJ 6-T GN - 3070327
Female test connector, color: green
Female test connector - PSBJ 6-T VT - 3070328
Female test connector, color: violet
06/26/2020 Page 19 / 20
https://www.phoenixcontact.com/us/products/3072801
Feed-through terminal block - UKD 6 - 3072801
Accessories
Female test connector - PSBJ 6-T BU - 3070329
Female test connector, color: blue
Test socket
Female test connector - TPS 3/20/5 - 3246586
Female test connector, for 4 mm test plugs, for screwing into the bridge shaft, color: silver
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
06/26/2020 Page 20 / 20
