https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Disconnect terminal block, with knurled screw, for operating the disconnect slide by hand, Connection
method: Screw connection, Cross section: 0.5 mm² -10 mm² , AWG: 20 - 10, Width: 8.2 mm, Mounting type: NS
35/7,5, NS 35/15, NS 32, Color: gray
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
50 STK
Custom tariff number
85369010
Country of origin
Poland
Technical data
Environmental Product Compliance
China RoHS
Hazardous substances above threshold values;
Environmentally Friendly Use Period = 50;
For details go to tab “Downloads”, Category “Manufacturer's declaration”
General
Number of levels
1
Number of connections
2
Nominal cross section
6 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
09/08/2016 Page 1 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Technical data
General
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
41 A
Maximum load current
57 A (with 10 mm² conductor cross section)
Nominal voltage UN
500 V
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
7.3 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
2
6 mm / 1.4 kg
10 mm² / 2 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.5 mm²
Tractive force setpoint
20 N
Conductor cross section tensile test
6 mm²
Tractive force setpoint
80 N
Conductor cross section tensile test
10 mm²
Tractive force setpoint
90 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 32/NS 35
Setpoint
5N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 6,4 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
6 mm²
Short-time current
0.72 kA
Conductor cross section short circuit testing
10 mm²
Short-time current
1.2 kA
09/08/2016 Page 2 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Technical data
General
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s ) /Hz
Acceleration
3.12 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
8.2 mm
Length
66.5 mm
09/08/2016 Page 3 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Technical data
Dimensions
Height NS 35/7,5
66 mm
Height NS 35/15
73.5 mm
Height NS 32
71 mm
Connection data
Note
Terminal point
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG min.
20
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid min.
0.5 mm²
2 conductors with same cross section, solid max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
2 conductors with same cross section, stranded max.
4 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
2.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
4 mm²
sleeve, max.
Connection method
Screw connection
Stripping length
10 mm
Internal cylindrical gage
A5
Screw thread
M4
Tightening torque, min
1.5 Nm
Tightening torque max
1.6 Nm
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Flammability rating according to UL 94
V0
Drawings
09/08/2016 Page 4 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141126
eCl@ss 4.1
27141126
eCl@ss 5.0
27141126
eCl@ss 5.1
27141126
eCl@ss 6.0
27141126
eCl@ss 7.0
27141126
eCl@ss 8.0
27141126
eCl@ss 9.0
27141126
ETIM
ETIM 2.0
EC000902
ETIM 3.0
EC000902
ETIM 4.0
EC000902
ETIM 5.0
EC000902
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / EAC / cULus Recognized
Ex Approvals
Approval details
09/08/2016 Page 5 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Approvals
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B
C
mm²/AWG/kcmil
26-8
26-8
Nominal current IN
30 A
30 A
Nominal voltage UN
600 V
600 V
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B
C
mm²/AWG/kcmil
26-8
26-8
Nominal current IN
30 A
30 A
Nominal voltage UN
600 V
600 V
EAC EAC-Zulassung
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
Cover profile
Cover profile - AP-ME METER - 3034361
Cover profile, for covering terminal strips, snapped onto APT-ME cover profile carrier or APH-ME end bracket. A cover
profile carrier should be positioned at the ends and at intervals of around 40 cm. Length supplied: 1 m
Cover profile carrier
09/08/2016 Page 6 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Accessories
Cover profile carrier - APH-ME - 3034374
Cover profile carrier, for mounting on NS 35/7,5 DIN rail, for fixing the AP-ME cover profile, can be sealed as an option
Cover profile carrier - APT-ME - 3034358
Cover profile carrier for mounting on NS 35/7.5 DIN rail for attaching the cover profile AP-ME
DIN rail
DIN rail perforated - NS 32 PERF 2000MM - 1201002
G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m
DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015
G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
09/08/2016 Page 7 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Accessories
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
09/08/2016 Page 8 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Accessories
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
09/08/2016 Page 9 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Accessories
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
09/08/2016 Page 10 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Accessories
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
09/08/2016 Page 11 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Accessories
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.5 mm, Color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-UK 6-T - 3072802
End cover, Length: 66.5 mm, Width: 2.2 mm, Height: 37.9 mm, Color: gray
Insertion bridge
Insertion bridge - EB 2- 8 - 0202154
Insertion bridge, Pitch: 8 mm, Number of positions: 2, Color: gray
09/08/2016 Page 12 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Accessories
Insertion bridge - EB 3- 8 - 0202141
Insertion bridge, Pitch: 8 mm, Number of positions: 3, Color: gray
Insertion bridge - EB 4- 8 - 0202142
Insertion bridge, Pitch: 8 mm, Number of positions: 4, Color: gray
Insertion bridge - EB 10- 8 - 0202138
Insertion bridge, Pitch: 8 mm, Number of positions: 10, Color: gray
Insertion bridge - EB 1/3/5/7-8 - 3072340
Insertion bridge, Pitch: 16.4 mm, Length: 24 mm, Width: 55.4 mm, Number of positions: 4, Pin assignment: 1, 3, 5, 7,
Color: gray
Insertion bridge - EB 1/3/5-8 - 3072341
Insertion bridge, Pitch: 16.4 mm, Length: 24 mm, Width: 39 mm, Number of positions: 3, Pin assignment: 1,3,5,
Color: gray
Labeled terminal marker
09/08/2016 Page 13 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Accessories
Zack marker strip - ZB 8 CUS - 0825011
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into
tall marker groove, for terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Marker for terminal blocks - UC-TM 8 CUS - 0824597
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 8 CUS - 0829616
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11
- 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field:
10.5 x 8.15 mm
Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10, 11 20, etc. up to 91 - 100, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 10.5
x 8.15 mm
09/08/2016 Page 14 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Accessories
Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413
Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N,
PE, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Partition plate
Separating plate - TS-UK 6-T - 3072820
Separating plate, Length: 66.5 mm, Width: 1 mm, Height: 62.5 mm, Color: gray
Screw bridge
Fixed bridge - SCBI 10-8,15 - 3245134
Fixed bridge, Pitch: 8.2 mm, Number of positions: 10, Color: silver
Fixed bridge - SCBI 10-8,15 ISO - 3000417
Fixed bridge, Pitch: 8.2 mm, Number of positions: 10, Color: silver
Screwdriver tools
09/08/2016 Page 15 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Accessories
Screwdriver - SZS 1,0X4,0 VDE - 1205066
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Short-circuit connector
Short-circuit connector - KSS 8 - 0311540
Short-circuit connector, Pitch: 8 mm, Number of positions: 2, Color: black
Short-circuit connector - KSSI 2-8 - 3000722
Short-circuit connector, Pitch: 8 mm, Length: 11 mm, Width: 16.2 mm, Number of positions: 2, Color: black
Short-circuit connector - KSSI 4-8 - 3000735
Short-circuit connector, Pitch: 8 mm, Number of positions: 4, Color: black
09/08/2016 Page 16 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Accessories
Switching jumper
Switching jumper - SB 6-T 2-8 - 3075842
Switching jumper, Pitch: 8 mm, Number of positions: 2, Color: orange
Switching jumper - SB 6-T 3-8 - 3075843
Switching jumper, Pitch: 8 mm, Number of positions: 3, Color: orange
Switching jumper - SB 6-T 4-8 - 3075844
Switching jumper, Pitch: 8 mm, Number of positions: 4, Color: orange
Switching jumper - SBP-TB 6-T 2-8 - 3070321
Switching jumper, Pitch: 8.2 mm, Number of positions: 2, Color: orange
Switching jumper - SBP-TB 6-T 3-8 - 3070322
Switching jumper, Pitch: 8.2 mm, Number of positions: 3, Color: orange
09/08/2016 Page 17 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Accessories
Switching jumper - SBP-TB 6-T 4-8 - 3070323
Switching jumper, Pitch: 8.2 mm, Number of positions: 4, Color: orange
Switching jumper - SB 1/3/5/7-8-T - 3075845
Switching jumper, Number of positions: 7, Pin assignment: 1, 3, 5, 7, Color: orange
Switching lock
Switching lock - SL-SB - 3035761
Switching lock, for additional locking of short-circuit switching elements in current transformer measuring circuits,
Length: 16.3 mm, Width: 12.5 mm, Height: 13.6 mm, Color: white
Terminal marking
Zack marker strip - ZB 8:UNBEDRUCKT - 1052002
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Marker for terminal blocks - UC-TM 8 - 0818072
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
09/08/2016 Page 18 / 19
https://www.phoenixcontact.com/us/products/3072804
Disconnect terminal block - UK 6-TK-P - 3072804
Accessories
Marker for terminal blocks - UCT-TM 8 - 0828740
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal
block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
Test socket
Female test connector - PSBJ 6-T OG - 3070320
Female test connector, Color: orange
Female test connector - PSBJ 6-T WH - 3070324
Female test connector, Color: white
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
09/08/2016 Page 19 / 19
