https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, connection method: Screw connection, cross section: 0.2 mm² - 10 mm² , AWG: 24
- 8, width: 8.2 mm, mounting type: NS 35/7,5, NS 35/15, NS 32, color: gray
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4046356861601
Weight per Piece (excluding packing)
27.600 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
1
Number of connections
2
Nominal cross section
6 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
09/10/2019 Page 1 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Technical data
General
Maximum power dissipation for nominal condition
1.31 W
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
41 A
Maximum load current
50 A (with 10 mm² conductor cross section)
Nominal voltage UN
1000 V (The accessories used may reduce the voltage.)
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
2
6 mm / 1.4 kg
10 mm² / 2 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.2 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
6 mm²
Tractive force setpoint
80 N
Conductor cross section tensile test
10 mm²
Tractive force setpoint
90 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 32/NS 35
Setpoint
5N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
6 mm²
Short-time current
0.72 kA
09/10/2019 Page 2 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Technical data
General
Conductor cross section short circuit testing
10 mm²
Short-time current
1.2 kA
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s ) /Hz
Acceleration
3.12 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
09/10/2019 Page 3 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Technical data
Dimensions
Length
105.2 mm
Width
8.2 mm
Height NS 35/7,5
53 mm
Height NS 35/15
60.5 mm
Height NS 32
58 mm
Connection data
Note
Terminal point
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
Connection method
Screw connection
Stripping length
12 mm
Screw thread
M4
Tightening torque, min
1.5 Nm
Tightening torque max
1.8 Nm
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
09/10/2019 Page 4 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Technical data
Environmental Product Compliance
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141126
eCl@ss 8.0
27141126
eCl@ss 9.0
27141126
ETIM
ETIM 3.0
EC000902
ETIM 4.0
EC000902
ETIM 5.0
EC000902
ETIM 6.0
EC000902
ETIM 7.0
EC000902
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
09/10/2019 Page 5 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Approvals
Approvals
Approvals
UL Recognized / KEMA-KEUR / cUL Recognized / IECEE CB Scheme / cULus Recognized
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
50 A
50 A
mm²/AWG/kcmil
20-8
20-8
KEMA-KEUR
http://www.dekra-certification.com
Nominal voltage UN
1000 V
Nominal current IN
41 A
mm²/AWG/kcmil
0.2-10
cUL Recognized
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
50 A
50 A
mm²/AWG/kcmil
20-8
20-8
IECEE CB Scheme
71-104969
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
http://www.iecee.org/
FILE E 60425
FILE E 60425
NL-37547_A1
09/10/2019 Page 6 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Approvals
cULus Recognized
Accessories
Accessories
Cover profile
Cover profile - AP-ME METER - 3034361
Cover profile, for covering terminal strips, snapped onto APT-ME cover profile carrier or APH-ME end bracket. A cover
profile carrier should be positioned at the ends and at intervals of around 40 cm. Length supplied: 1 m
Covering hood - AH-ME - 3240265
Cover, for the contact- and dust-protected encapsulation of the components
Cover profile carrier
Cover profile carrier - APH-ME - 3034374
Cover profile carrier, for mounting on NS 35/7,5 DIN rail, for fixing the AP-ME cover profile, can be sealed as an option
Cover profile carrier - APT-ME - 3034358
Cover profile carrier for mounting on NS 35/7.5 DIN rail for attaching the cover profile AP-ME
09/10/2019 Page 7 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
DIN rail
DIN rail perforated - NS 32 PERF 2000MM - 1201002
DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015
DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
09/10/2019 Page 8 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
09/10/2019 Page 9 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
09/10/2019 Page 10 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
End block
09/10/2019 Page 11 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-UT 6-T/SP - 3072816
End cover, length: 105.2 mm, width: 2.2 mm, height: 48.3 mm, color: gray
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
09/10/2019 Page 12 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
09/10/2019 Page 13 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Plug-in bridge - FBS 2-8 - 3030284
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-8 - 3030297
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red
Plug-in bridge - FBS 4-8 - 3030307
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-8 - 3030310
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red
Plug-in bridge - FBS 6-8 - 3032470
Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: red
09/10/2019 Page 14 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Plug-in bridge - FBS 10-8 - 3030323
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red
Plug-in bridge - FBS 1/3-8 - 3032363
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, pin assignment: 1,3, color: red
Plug-in bridge - FBS 1/4-8 - 3032376
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, pin assignment: 1, 4, color: red
Plug-in bridge - FBS 1/5-8 - 3032381
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, pin assignment: 1,5, color: red
Plug-in bridge - FBS 1/3/5-8 - 3032389
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, pin assignment: 1,3,5, color: red
09/10/2019 Page 15 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Plug-in bridge - FBS 1/4/7/10-8 - 3032402
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, pin assignment: 1,4,7,10, color: red
Plug-in bridge - FBS 1/3/5/7-8 - 3030396
Plug-in bridge, pitch: 8.2 mm, width: 55.7 mm, number of positions: 7, pin assignment: 1, 3, 5, 7, color: red
Plug-in bridge - FBS 1/2/4-8 - 3032377
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 3, pin assignment: 1,2,4, color: red
Plug-in bridge - FBSR 2-8 - 3033808
Plug-in bridge, pitch: 8.2 mm, width: 14.8 mm, number of positions: 2, color: red
Plug-in bridge - FBSR 3-8 - 3001597
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red
09/10/2019 Page 16 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Plug-in bridge - FBSR 4-8 - 3000585
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red
Plug-in bridge - FBSR 5-8 - 3033809
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red
Plug-in bridge - FBSR 10-8 - 3001599
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red
Plug-in bridge - FBSR 16-8 - 3033816
Plug-in bridge, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, color: red
Plug-in bridge - FBSR 1/6/11/14-8 - 3033822
Plug-in bridge, non-adjacent, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, pin assignment: 1, 6, 11, 14,
color: red
09/10/2019 Page 17 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Plug-in bridge - FBSR 1/6/11/16-8 - 3033820
Plug-in bridge, non-adjacent, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, pin assignment: 1, 6, 11, 16,
color: red
Plug-in bridge - FBSR 1/7/13/16-8 - 3033821
Plug-in bridge, non-adjacent, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, pin assignment: 1, 7, 13, 16,
color: red
Plug-in bridge - FBS 2-8 CT - 3033830
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: orange
Plug-in bridge - FBS 3-8 CT - 3033831
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: orange
Plug-in bridge - FBS 4-8 CT - 3033832
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: orange
09/10/2019 Page 18 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Plug-in bridge - FBS 10-8 CT - 3033833
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: orange
Plug-in bridge - FBS 2-8 BU - 3032567
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 3-8 BU - 3032570
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: blue
Plug-in bridge - FBS 4-8 BU - 3032583
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-8 BU - 3032596
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: blue
09/10/2019 Page 19 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Plug-in bridge - FBS 6-8 BU - 3032677
Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: blue
Plug-in bridge - FBS 10-8 BU - 3032606
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: blue
Labeled terminal marker
Zack marker strip - ZB 8 CUS - 0825011
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
Marker for terminal blocks - UC-TM 8 CUS - 0824597
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual
labels: 56
Marker for terminal blocks - UCT-TM 8 CUS - 0829616
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual
labels: 42
09/10/2019 Page 20 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 8.2
mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm,
lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x
8.15 mm, Number of individual labels: 10
Partition plate
Separating plate - TS-UT 6-T/SP - 3072821
Separating plate, length: 105.2 mm, width: 1 mm, height: 67.5 mm, color: gray
Spacer plate - DP PS-8 - 3036741
Spacer plate, length: 22.4 mm, width: 8.2 mm, height: 29 mm, number of positions: 1, color: red
09/10/2019 Page 21 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Screw bridge
Screw bridge - SCBI 10-8,15 - 3245134
Screw bridge, with insulating collar, pitch: 8.2 mm, number of positions: 10, color: silver
Isolator bridge bar - SCBI 10-8,15 ISO - 3000417
Isolator bridge bar, for switchable cross bridges, with insulating collar, pitch: 8.2 mm, number of positions: 10, color: silver
Screwdriver tools
Screwdriver - SZS 1,0X4,0 VDE - 1205066
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Screwdriver - SF-SL 0,8X4,0-100 S-VDE - 1212588
Actuation tool, for ST terminal blocks, VDE insulated, with slimmer insulation integrated in the blade, also suitable for use
as a bladed screwdriver, size: 0.8 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Short-circuit connector
09/10/2019 Page 22 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Short-circuit connector - KSS 8 - 0311540
Short-circuit connector, pitch: 8 mm, number of positions: 2, color: black
Short-circuit connector - KSS 4- 8 - 0309549
Short-circuit connector, pitch: 8 mm, number of positions: 4, color: black
Short-circuit connector - FBSRH 2-8 - 3033802
Short-circuit connector, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red
Short-circuit connector - FBSRH 3-8 - 3033803
Short-circuit connector, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red
Short-circuit connector - FBSRH 4-8 - 3033804
Short-circuit connector, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red
Switching jumper
09/10/2019 Page 23 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Switching jumper - SB-MER 2-8 - 3000587
Switching jumper, pitch: 8.2 mm, length: 24.7 mm, width: 16.4 mm, number of positions: 2, color: gray/orange
Switching jumper - SB-MER 3-8 - 3000588
Switching jumper, pitch: 8.2 mm, length: 24.7 mm, width: 24.6 mm, number of positions: 3, color: gray/orange
Switching jumper - SB-MER 4-8 - 3000589
Switching jumper, pitch: 8.2 mm, length: 24.7 mm, width: 32.8 mm, number of positions: 4, color: gray/orange
Switching jumper - SB 6-T 2-8 - 3075842
Switching jumper, pitch: 8 mm, number of positions: 2, color: orange
Switching jumper - SB 6-T 3-8 - 3075843
Switching jumper, pitch: 8 mm, number of positions: 3, color: orange
09/10/2019 Page 24 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Switching jumper - SB 6-T 4-8 - 3075844
Switching jumper, pitch: 8 mm, number of positions: 4, color: orange
Switching jumper - SB 6-T 10-8 - 3075846
Switching jumper, pitch: 8 mm, number of positions: 10, color: orange
Switching jumper - SBP 6-T 2-8 - 3070321
Switching jumper, with test socket, pitch: 8.2 mm, number of positions: 2, color: orange
Switching jumper - SBP 6-T 3-8 - 3070322
Switching jumper, with test socket, pitch: 8.2 mm, number of positions: 3, color: orange
Switching jumper - SBP 6-T 4-8 - 3070323
Switching jumper, with test socket, pitch: 8.2 mm, number of positions: 4, color: orange
Terminal marking
09/10/2019 Page 25 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Zack marker strip - ZB 8:UNBEDRUCKT - 1052002
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels:
10
Marker for terminal blocks - UC-TM 8 - 0818072
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 56
Marker for terminal blocks - UCT-TM 8 - 0828740
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size:
7.6 x 10.5 mm, Number of individual labels: 42
Test plug terminal block
Test plugs - MPS-MT/ 4MM - 3048577
Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver
Test plugs - PS-8 - 3031005
Test plugs, color: red
09/10/2019 Page 26 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Test plugs - PS-8/2,3MM RD - 3048564
Test plugs, color: red
Female test connector - PSBJ 6-T GY - 3070316
Female test connector, color: gray
Female test connector - PSBJ 6-T BN - 3070317
Female test connector, color: brown
Female test connector - PSBJ 6-T BK - 3070318
Female test connector, color: black
Female test connector - PSBJ 6-T RD - 3070319
Female test connector, color: red
09/10/2019 Page 27 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Female test connector - PSBJ 6-T OG - 3070320
Female test connector, color: orange
Female test connector - PSBJ 6-T WH - 3070324
Female test connector, color: white
Female test connector - PSBJ 6-T YE - 3070326
Female test connector, color: yellow
Female test connector - PSBJ 6-T GN - 3070327
Female test connector, color: green
Female test connector - PSBJ 6-T VT - 3070328
Female test connector, color: violet
09/10/2019 Page 28 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Female test connector - PSBJ 6-T BU - 3070329
Female test connector, color: blue
Test socket
Female test connector - TPS 3/20/5 - 3246586
Female test connector, for 4 mm test plugs, for screwing into the bridge shaft, color: silver
Test adapter - PAI-4-FIX BU - 3032729
Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: blue
Test adapter - PAI-4-FIX OG - 3034455
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX YE - 3032745
Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: yellow
09/10/2019 Page 29 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Test adapter - PAI-4-FIX RD - 3032732
Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: red
Test adapter - PAI-4-FIX GN - 3032758
Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: green
Test adapter - PAI-4-FIX BK - 3032774
Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: black
Test adapter - PAI-4-FIX GY - 3032790
Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: gray
Test adapter - PAI-4-FIX VT - 3032761
Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm ... 8.2 mm pitch, color: violet
09/10/2019 Page 30 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Test adapter - PAI-4-FIX BN - 3032787
Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: brown
Test adapter - PAI-4-FIX WH - 3032797
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAIS-4-FIX GY - 3032791
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: gray
Test adapter - PAIS-4-FIX BK - 3032792
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: black
Test adapter - PAIS-4-FIX RD - 3032793
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: red
09/10/2019 Page 31 / 32
https://www.phoenixcontact.com/us/products/3072817
Feed-through terminal block - UTD 6/SP - 3072817
Accessories
Test adapter - PAIS-4-FIX BU - 3032798
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: blue
Test adapter - PAIS-4-FIX YE - 3032799
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: yellow
Test adapter - PAIS-4-FIX GN - 3032801
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: green
Test adapter - PAIS-4-FIX VT - 3032802
Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: violet
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
09/10/2019 Page 32 / 32
