3073432

https://www.phoenixcontact.com/us/products/3073432 Panel feed-through terminal block - UWV 16/S - 3073432 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Panel feed-through terminal block, Connection method: Screw connection, Load current : 101 A, Cross section: 6 mm² - 25 mm², AWG 10 - 6, Connection direction of the conductor to plug-in direction: 90 °, Width: 12.1 mm, Color: gray Product Features  Easy grouping with engagement pin versions  Both terminal halves can be easily assembled by simply snapping them together  Molded versions ensure maximum tightness of seal  Touch-proof insulating housing in a new design  Automatic compensation of the panel thickness via the snap principle integrated in the insulation housing  Spacer plates increase air and creepage distances  Universal screw connection with screw locking   Key commercial data Packing unit 11 Custom tariff number 85369010 Country of origin China Technical data General Number of levels 1 Number of connections 2 Color gray Insulating material PA Inflammability class according to UL 94 V0 Maximum load current 101 A (with 25 mm² conductor cross section) Rated surge voltage 6 kV Pollution degree 3 Surge voltage category III 01.11.2013   Page 1 / 6 https://www.phoenixcontact.com/us/products/3073432 Panel feed-through terminal block - UWV 16/S - 3073432 Technical data General Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 76 A Nominal voltage UN 800 V with spacer plate Open side panel nein Number of positions 1 Dimensions Width 12.1 mm Connection data Note Terminal sleeve Connection side Level 1 ext. 1 Connection method Screw connection Note Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area. Conductor cross section solid min. 6 mm² Conductor cross section solid max. 25 mm² Conductor cross section stranded min. 6 mm² Conductor cross section stranded max. 16 mm² Conductor cross section AWG/kcmil min. 10 Conductor cross section AWG/kcmil max 4 Conductor cross section stranded, with ferrule without plastic sleeve min. 6 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 16 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 6 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 16 mm² 2 conductors with same cross section, solid min. 2.5 mm² 2 conductors with same cross section, solid max. 10 mm² 2 conductors with same cross section, stranded min. 2.5 mm² 2 conductors with same cross section, stranded max. 6 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 4 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 6 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 4 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 6 mm² sleeve, max. Stripping length 16 mm Internal cylindrical gage B7 01.11.2013   Page 2 / 6 https://www.phoenixcontact.com/us/products/3073432 Panel feed-through terminal block - UWV 16/S - 3073432 Technical data Connection data Screw thread M5 Tightening torque, min 2.5 Nm Tightening torque max 3 Nm Classifications eCl@ss eCl@ss 4.0 27141131 eCl@ss 4.1 27141131 eCl@ss 5.0 27141134 eCl@ss 5.1 27141134 eCl@ss 6.0 27141134 eCl@ss 7.0 27141134 eCl@ss 8.0 27141134 ETIM ETIM 2.0 EC001283 ETIM 3.0 EC001283 ETIM 4.0 EC001283 ETIM 5.0 EC001283 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / GOST Ex Approvals 01.11.2013   Page 3 / 6 https://www.phoenixcontact.com/us/products/3073432 Panel feed-through terminal block - UWV 16/S - 3073432 Approvals Approvals submitted Approval details UL Recognized    B C mm²/AWG/kcmil 10-4 10-4 Nominal current IN 85 A 85 A Nominal voltage UN 600 V 600 V GOST  Accessories Accessories Flange Flange cover - UWV 16-F - 3074619 Flange cover, Color: gray     Partition plate Spacer plate - DP-UWV 16 - 3074428 Spacer plate, Color: gray     Screwdriver tools 01.11.2013   Page 4 / 6 https://www.phoenixcontact.com/us/products/3073432 Panel feed-through terminal block - UWV 16/S - 3073432 Accessories Screwdriver - SZS 1,0X4,0 VDE - 1205066 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Marker for terminal blocks - UC-TM 12 - 0819194 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 12 mm, Lettering field: 11.45 x 10.5 mm     Marker for terminal blocks - UC-TMF 12 - 0819233 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 12 mm, Lettering field: 11.45 x 5.1 mm     Zack marker strip - ZB 12:UNPRINTED - 0812120 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 12.2 mm, Lettering field: 12 x 10.5 mm     Zack Marker strip, flat - ZBF 12:UNBEDRUCKT - 0809735 Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 12 mm, Lettering field: 5.15 x 12.15 mm     01.11.2013   Page 5 / 6 https://www.phoenixcontact.com/us/products/3073432 Panel feed-through terminal block - UWV 16/S - 3073432 Accessories Marker for terminal blocks - TMT 100 R - 0816605 Marker for terminal blocks, Roll, white, Unlabeled, Can be labeled with: THERMOMARK ROLL, THERMOMARK X, THERMOMARK S1.1, Unperforated, Mounting type: Snap into universal marker groove, Snap into flat marker groove, Lettering field: 6.35 x 101.5 mm     Marker for terminal blocks - TMT (EX9,5)R - 0828295 Marker for terminal blocks, Roll, white, Unlabeled, Can be labeled with: THERMOMARK ROLL, THERMOMARK X, THERMOMARK S1.1, Mounting type: Snap into universal marker groove, Snap into flat marker groove, Lettering field: 9.5 x 50000 mm     Drawings Dimensioned drawing 29,5 Dimensioned drawing 39,1 Ø4,5 Ø10 Ø4,5 43,1 10 18,1 10 10,2 38,3 12 12 15** 13,3* 1-6 © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 01.11.2013   Page 6 / 6