3073458

https://www.phoenixcontact.com/us/products/3073458 Panel feed-through terminal block - UWV 25/S - 3073458 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Panel feed-through terminal block, Connection method: Screw connection, Load current : 125 A, Cross section: 6 mm² - 35 mm², AWG 8 - 3, Connection direction of the conductor to plug-in direction: 90 °, Width: 15.1 mm, Color: gray Product Features  Easy grouping with engagement pin versions  Both terminal halves can be easily assembled by simply snapping them together  Molded versions ensure maximum tightness of seal  Touch-proof insulating housing in a new design  Spacer plates increase air and creepage distances  Universal screw connection with screw locking  Automatic compensation of the panel thickness via the snap principle integrated in the insulation housing   Key commercial data Packing unit 11 Custom tariff number 85369010 Country of origin China Technical data General Number of levels 1 Number of connections 2 Color gray Insulating material PA Inflammability class according to UL 94 V0 Maximum load current 125 A Rated surge voltage 6 kV Pollution degree 3 Surge voltage category III 01.11.2013   Page 1 / 6 https://www.phoenixcontact.com/us/products/3073458 Panel feed-through terminal block - UWV 25/S - 3073458 Technical data General Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 101 A Nominal voltage UN 800 V with spacer plate Open side panel nein Number of positions 1 Dimensions Width 15.1 mm Connection data Note Terminal sleeve Connection side Level 1 ext. 1 Connection method Screw connection Note Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area. Conductor cross section solid min. 6 mm² Conductor cross section solid max. 35 mm² Conductor cross section stranded min. 10 mm² Conductor cross section stranded max. 25 mm² Conductor cross section AWG/kcmil min. 10 Conductor cross section AWG/kcmil max 2 Conductor cross section stranded, with ferrule without plastic sleeve min. 4 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 25 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 4 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 25 mm² 2 conductors with same cross section, solid min. 2.5 mm² 2 conductors with same cross section, solid max. 10 mm² 2 conductors with same cross section, stranded min. 4 mm² 2 conductors with same cross section, stranded max. 10 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 2.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 10 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 10 mm² sleeve, max. Stripping length 19 mm Internal cylindrical gage B7 01.11.2013   Page 2 / 6 https://www.phoenixcontact.com/us/products/3073458 Panel feed-through terminal block - UWV 25/S - 3073458 Technical data Connection data Screw thread M5 Tightening torque, min 4 Nm Tightening torque max 4.5 Nm Classifications eCl@ss eCl@ss 4.0 27141131 eCl@ss 4.1 27141131 eCl@ss 5.0 27141134 eCl@ss 5.1 27141134 eCl@ss 6.0 27141134 eCl@ss 7.0 27141134 eCl@ss 8.0 27141134 ETIM ETIM 2.0 EC001283 ETIM 3.0 EC001283 ETIM 4.0 EC001283 ETIM 5.0 EC001283 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / GOST Ex Approvals 01.11.2013   Page 3 / 6 https://www.phoenixcontact.com/us/products/3073458 Panel feed-through terminal block - UWV 25/S - 3073458 Approvals Approvals submitted Approval details UL Recognized    B C mm²/AWG/kcmil 10-2 10-2 Nominal current IN 112.5 A 112.5 A Nominal voltage UN 600 V 600 V GOST  Accessories Accessories Flange Flange cover - UWV 25-F - 3074622 Flange cover, Color: gray     Mounting material Sealing plate - POT-UW 25 - 3074075 Sealing plate, Color: gray     Partition plate 01.11.2013   Page 4 / 6 https://www.phoenixcontact.com/us/products/3073458 Panel feed-through terminal block - UWV 25/S - 3073458 Accessories Spacer plate - DP-UWV 25 - 3074431 Spacer plate, Color: gray     Screwdriver tools Screwdriver - SZS 1,0X6,5 VDE - 1205079 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip     Terminal marking Zack marker strip - ZB 15:UNBEDRUCKT - 0811972 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 15.2 mm, Lettering field: 10.5 x 15.1 mm     Zack Marker strip, flat - ZBF 15:UNBEDRUCKT - 0811202 Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, Lettering field: 15 x 5.2 mm     Marker for terminal blocks - TMT 100 R - 0816605 Marker for terminal blocks, Roll, white, Unlabeled, Can be labeled with: THERMOMARK ROLL, THERMOMARK X, THERMOMARK S1.1, Unperforated, Mounting type: Snap into universal marker groove, Snap into flat marker groove, Lettering field: 6.35 x 101.5 mm     01.11.2013   Page 5 / 6 https://www.phoenixcontact.com/us/products/3073458 Panel feed-through terminal block - UWV 25/S - 3073458 Accessories Marker for terminal blocks - TMT (EX9,5)R - 0828295 Marker for terminal blocks, Roll, white, Unlabeled, Can be labeled with: THERMOMARK ROLL, THERMOMARK X, THERMOMARK S1.1, Mounting type: Snap into universal marker groove, Snap into flat marker groove, Lettering field: 9.5 x 50000 mm     Drawings Dimensioned drawing 33,3 Dimensioned drawing 45,5 Ø5,5 Ø12 Ø5,5 54,8 14 23,3 14 11,7 45 15 15 19** 16,6* 1-6 © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 01.11.2013   Page 6 / 6