3073500

https://www.phoenixcontact.com/us/products/3073500 Panel feed-through terminal block - UW 25-POT - 3073500 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Panel feed-through terminal block, Connection method: Screw connection, Cable lug connection, Load current : 125 A, Cross section: 6 mm² - 35 mm², AWG 10 - 2, Connection direction of the conductor to plug-in direction: 0 °, Width: 15.1 mm, Color: gray Product Features  Easy grouping with engagement pin versions  Both terminal halves can be easily assembled by simply snapping them together  Molded versions ensure maximum tightness of seal  Touch-proof insulating housing in a new design  Automatic compensation of the panel thickness via the snap principle integrated in the insulation housing  Spacer plates increase clearances and creepage distances  Universal screw connection with screw locking     Key commercial data Packing unit 1 pc Custom tariff number 85369010 Country of origin China Technical data General Number of levels 1 Number of connections 2 Color gray Insulating material PA Inflammability class according to UL 94 V0 Maximum load current 125 A Rated surge voltage 6 kV Pollution degree 3 05/19/2015   Page 1 / 4 https://www.phoenixcontact.com/us/products/3073500 Panel feed-through terminal block - UW 25-POT - 3073500 Technical data General Surge voltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 101 A Nominal voltage UN 800 V Open side panel nein Number of positions 1 Dimensions Width 15.1 mm Plate thickness 1 mm ... 6 mm Connection data Note Terminal sleeve Connection side Outside Connection method Screw connection Note Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area. Conductor cross section solid min. 6 mm² Conductor cross section solid max. 35 mm² Conductor cross section flexible min. 10 mm² Conductor cross section flexible max. 25 mm² Conductor cross section AWG min. 10 Conductor cross section AWG max. 2 Conductor cross section flexible, with ferrule without plastic sleeve min. 4 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 25 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 25 mm² 2 conductors with same cross section, solid min. 2.5 mm² 2 conductors with same cross section, solid max. 10 mm² 2 conductors with same cross section, stranded min. 4 mm² 2 conductors with same cross section, stranded max. 10 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 2.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 10 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 10 mm² sleeve, max. 05/19/2015   Page 2 / 4 https://www.phoenixcontact.com/us/products/3073500 Panel feed-through terminal block - UW 25-POT - 3073500 Technical data Connection data Stripping length 19 mm Internal cylindrical gage B7 Screw thread M5 Tightening torque, min 4 Nm Tightening torque max 4.5 Nm Connection side Inside Connection method Cable lug connection Tightening torque, min 4 Nm Tightening torque max 4.5 Nm Classifications eCl@ss eCl@ss 4.0 27141131 eCl@ss 4.1 27141131 eCl@ss 5.0 27141134 eCl@ss 5.1 27141134 eCl@ss 6.0 27141134 eCl@ss 7.0 27141134 eCl@ss 8.0 27141134 ETIM ETIM 2.0 EC001283 ETIM 3.0 EC001283 ETIM 4.0 EC001283 ETIM 5.0 EC001283 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals 05/19/2015   Page 3 / 4 https://www.phoenixcontact.com/us/products/3073500 Panel feed-through terminal block - UW 25-POT - 3073500 Approvals Approvals UL Recognized / EAC Ex Approvals Approvals submitted Approval details UL Recognized    B C mm²/AWG/kcmil 10-2 10-2 Nominal current IN 112.5 A 112.5 A Nominal voltage UN 600 V 600 V EAC  Drawings Dimensional drawing Dimensional drawing 71 Ø5,5 Ø12 42,3 20,6 15 19** 16,6* 25,6 48,5 14 6 30 14 Ø5,5 15 M6 1-6 * Only when using the UW...‑F flange plate ** Dimensions when using the DP-UW... spacer plate Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 05/19/2015   Page 4 / 4