3074169

https://www.phoenixcontact.com/us/products/3074169 Fuse modular terminal block - UT 4-HESI (5X20) GY - 3074169 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Fuse modular terminal block, Connection method: Screw connection, Cross section: 0.14 mm²- 6 mm², AWG: 26 - 10, Nominal current: 6.3 A, Nominal voltage: 500 V, Width: 6.2 mm, Fuse type: G / 5 x 20, Fuse type: Glass / ceramics / ..., Mounting type: NS 35/7,5, NS 35/15, Color: gray Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 17.2 g Custom tariff number 85369085 Country of origin Germany Technical data General Note The current is determined by the fuse used, the voltage by the selected LED. If the fuse is faulty, the downstream circuit will not be disconnected. Number of levels 1 Number of connections 2 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Fuse G / 5 x 20 Fuse type Glass / ceramics / ... Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation max. 1.6 W (With single arrangement of the fuse terminal block in the event of overload) 03/14/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/3074169 Fuse modular terminal block - UT 4-HESI (5X20) GY - 3074169 Technical data General Connection in acc. with standard IEC 60947-7-3 Maximum load current 6.3 A (the current is determined by the fuse used) Nominal current IN 6.3 A Nominal voltage UN 500 V Open side panel No Dimensions Width 6.2 mm Length 57.8 mm Height NS 35/7,5 73 mm Height NS 35/15 80.5 mm Connection data Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. Connection method Screw connection Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm 03/14/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/3074169 Fuse modular terminal block - UT 4-HESI (5X20) GY - 3074169 Technical data Connection data Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-3 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141116 eCl@ss 4.1 27141116 eCl@ss 5.0 27141116 eCl@ss 5.1 27141116 eCl@ss 6.0 27141116 eCl@ss 7.0 27141116 eCl@ss 8.0 27141116 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000899 ETIM 4.0 EC000899 ETIM 5.0 EC000899 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / KEMA-KEUR / IECEE CB Scheme / GL / DNV / EAC / cULus Recognized 03/14/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/3074169 Fuse modular terminal block - UT 4-HESI (5X20) GY - 3074169 Approvals Ex Approvals Approvals submitted Approval details CSA    B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 6.3 A 6.3 A Nominal voltage UN 600 V 600 V   B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 6.3 A 6.3 A Nominal voltage UN 600 V 600 V   B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 6.3 A 6.3 A Nominal voltage UN 600 V 600 V UL Recognized  cUL Recognized  KEMA-KEUR      mm²/AWG/kcmil 0.14-4 Nominal current IN 6.3 A Nominal voltage UN 250 V 03/14/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/3074169 Fuse modular terminal block - UT 4-HESI (5X20) GY - 3074169 Approvals IECEE CB Scheme      mm²/AWG/kcmil 0.14-4 Nominal current IN 6.3 A Nominal voltage UN 250 V GL  DNV  EAC  cULus Recognized  Drawings 03/14/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/3074169 Fuse modular terminal block - UT 4-HESI (5X20) GY - 3074169 Circuit diagram Application drawing Fuse terminal blocks in interconnected arrangement, block consisting of 5 fuse terminal blocks 03/14/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/3074169 Fuse modular terminal block - UT 4-HESI (5X20) GY - 3074169 Application drawing Fuse terminal block in single arrangement, block consisting of one fuse terminal block and 4 feed-through terminal blocks Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/14/2016   Page 7 / 7