3075896

https://www.phoenixcontact.com/us/products/3075896 Bolt connection terminal block - RBO 6 - 3075896 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bolt connection terminal block, Connection method: Bolt connection, Cross section: 2.5 mm² - 35 mm², AWG: 12 - 2, Width: 17 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15, NS 32 Product Features ■ ■ ■ ■ Compact connection with ring and fork-type cable lugs Mounting on standard DIN rails or directly in control boxes Isolator bridge bar for switchable cross connections Bridge shaft for potential distribution using standard screw bridges Key Commercial Data Packing unit 1 pc Minimum order quantity 40 pc Weight per Piece (excluding packing) 37.5 g Custom tariff number 85369010 Country of origin India Technical data General Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 35 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 05/10/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/3075896 Bolt connection terminal block - RBO 6 - 3075896 Technical data General Overvoltage category III Insulating material group I Maximum load current 125 A (with 35 mm² conductor cross section) Nominal current IN 125 A Nominal voltage UN 800 V Open side panel No Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 2 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of tight fit on support Test passed Tight fit on carrier NS 32/NS 35 Setpoint 10 N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 35 mm² Short-time current 4.2 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 1.857 (m/s ) /Hz Acceleration 0,8 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 2 2 05/10/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/3075896 Bolt connection terminal block - RBO 6 - 3075896 Technical data General Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Dimensions Width 17 mm End cover width 2.2 mm Length 80.8 mm Height NS 35/7,5 49.8 mm Height NS 35/15 57.3 mm Height NS 32 54.8 mm Pitch 17.00 mm Connection data Note Connection bolts Connection method Bolt connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 2.5 mm² Conductor cross section solid max. 35 mm² Conductor cross section AWG min. 12 Conductor cross section AWG max. 2 Conductor cross section flexible min. 2.5 mm² Conductor cross section flexible max. 35 mm² Min. AWG conductor cross section, flexible 12 Max. AWG conductor cross section, flexible 2 Cable lug connection according to standard DIN 46 234 Min. cross section for cable lug connection 6 mm² Max. cross section for cable lug connection 35 mm² Hole diameter, min. 6.5 mm Cable lug width, max. 15 mm Bolt diameter 6 mm Cable lug connection according to standard DIN 46237 Min. cross section for cable lug connection 2.5 mm² Max. cross section for cable lug connection 6 mm² Hole diameter, min. 6.5 mm Cable lug width, max. 11 mm Bolt diameter 6 mm 05/10/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/3075896 Bolt connection terminal block - RBO 6 - 3075896 Technical data Connection data Screw thread M6 Tightening torque, min 3.2 Nm Tightening torque max 3.7 Nm Standards and Regulations Connection in acc. with standard CUL IEC 60947-7-1 DIN 46 234 DIN 46237 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals 05/10/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/3075896 Bolt connection terminal block - RBO 6 - 3075896 Approvals Approvals UL Recognized / cUL Recognized / EAC / CSA / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized    B C Nominal current IN 115 A 115 A Nominal voltage UN 600 V 600 V cUL Recognized    B C Nominal current IN 115 A 115 A Nominal voltage UN 600 V 600 V D EAC  CSA    B C mm²/AWG/kcmil 12-2 12-2 Nominal current IN 115 A 115 A Nominal voltage UN 600 V 600 V EAC  05/10/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/3075896 Bolt connection terminal block - RBO 6 - 3075896 Approvals cULus Recognized  Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/10/2016   Page 6 / 6