https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Installation level terminal block, Screw connection, cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, width: 5.2 mm,
color: gray, mounting type: NS 35/7,5, NS 35/15
Why buy this product
The installation terminal block features a particularly low-profile design and is suitable for wiring in flat installation distributors
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
50 STK
GTIN
GTIN
4046356643962
Weight per Piece (excluding packing)
15.600 g
Custom tariff number
85369010
Country of origin
Germany
Technical data
General
Note
Assembly instructions:
For secure fastening of the neutral busbar, supports must be set at the
beginning and end of each terminal strip as well as every 20 cm on longer
terminal strips.
Number of levels
3
Number of connections
4
Nominal cross section
4 mm²
Color
gray
Insulating material
PA
07/04/2018 Page 1 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Technical data
General
Flammability rating according to UL 94
V0
Maximum load current
30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
24 A (with a 2.5 mm² conductor cross section)
Current carrying capacity of the neutral busbar
140 A
Rated surge voltage
4 kV
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Nominal current IN
24 A (with 4 mm² conductor cross section)
Maximum load current
30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
Nominal voltage UN
400 V (phase conductor/phase conductor)
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test failed
Surge voltage test setpoint
7.3 kV
Result of power-frequency withstand voltage test
Test performed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
2.5 mm² / 0.7 kg
4 mm² / 0.9 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.2 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
2.5 mm²
Tractive force setpoint
50 N
Conductor cross section tensile test
4 mm²
Tractive force setpoint
60 N
Result of tight fit on support
Test passed
07/04/2018 Page 2 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Technical data
General
Tight fit on carrier
NS 35
Setpoint
1N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
2.5 mm²
Short-time current
0.3 kA
Conductor cross section short circuit testing
4 mm²
Short-time current
0.48 kA
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s ) /Hz
Acceleration
3.12 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Dimensions
Width
5.2 mm
Length
93.5 mm
Height NS 35/7,5
51.5 mm
Height NS 35/15
59 mm
Connection data
07/04/2018 Page 3 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Technical data
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
0.75 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.75 mm²
sleeve, max.
Connection method
Screw connection
Stripping length
9 mm
Internal cylindrical gage
A3
Screw thread
M3
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
Standards and Regulations
Connection in acc. with standard
CSA
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
07/04/2018 Page 4 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141120
eCl@ss 4.1
27141120
eCl@ss 5.0
27141120
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141125
eCl@ss 9.0
27141125
ETIM
ETIM 3.0
EC000897
ETIM 4.0
EC001329
ETIM 5.0
EC001329
ETIM 6.0
EC001329
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / VDE Zeichengenehmigung / IECEE CB Scheme / cUL Recognized / cULus Recognized
Ex Approvals
Approval details
07/04/2018 Page 5 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Approvals
CSA
http://www.csagroup.org/services-industries/product-listing/
B
C
D
mm²/AWG/kcmil
24-12
24-12
24-12
Nominal current IN
20 A
Nominal voltage UN
300 V
150 V
300 V
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
D
mm²/AWG/kcmil
26-12
26-12
Nominal current IN
20 A
10 A
Nominal voltage UN
300 V
300 V
VDE Zeichengenehmigung
13631
http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx
Nominal current IN
21 A
Nominal voltage UN
400 V
FILE E 60425
40040774
IECEE CB Scheme
http://www.iecee.org/
DE1-60116
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
B
D
mm²/AWG/kcmil
26-12
26-12
Nominal current IN
20 A
10 A
Nominal voltage UN
300 V
300 V
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
07/04/2018 Page 6 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
07/04/2018 Page 7 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
07/04/2018 Page 8 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
07/04/2018 Page 9 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
07/04/2018 Page 10 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End cover
End cover - D-UTI/3 - 3076036
End cover, length: 93.5 mm, width: 2.2 mm, height: 51.2 mm, color: gray
Installation terminal block
Connection terminal block - AKG 16 BU - 0423014
Connection terminal block, connection method: Screw connection, load current: 76 A, cross section: 1.5 mm² - 16 mm²,
width: 9.8 mm, color: blue
Connection terminal block - AKG 35 BU - 0424013
Connection terminal block, connection method: Screw connection, load current: 125 A, cross section: 2.5 mm² - 35 mm²,
width: 14.3 mm, color: blue
07/04/2018 Page 11 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
07/04/2018 Page 12 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-5 - 3030161
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-5 - 3030174
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 14.2 mm, number of positions: 3, color: red
Plug-in bridge - FBS 4-5 - 3030187
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 19.4 mm, number of positions: 4, color: red
07/04/2018 Page 13 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Plug-in bridge - FBS 5-5 - 3030190
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 24.6 mm, number of positions: 5, color: red
Plug-in bridge - FBS 10-5 - 3030213
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 50.6 mm, number of positions: 10, color: red
Plug-in bridge - FBS 20-5 - 3030226
Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: red
Plug-in bridge - FBS 50-5 - 3038930
Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: red
Plug-in bridge - FBSR 2-5 - 3033702
Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: red
07/04/2018 Page 14 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Plug-in bridge - FBSR 3-5 - 3001591
Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: red
Plug-in bridge - FBSR 4-5 - 3001592
Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: red
Plug-in bridge - FBSR 5-5 - 3001593
Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: red
Plug-in bridge - FBSR 10-5 - 3033710
Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: red
Plug-in bridge - FBS 2-5 BU - 3036877
Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue
07/04/2018 Page 15 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Plug-in bridge - FBS 3-5 BU - 3036880
Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: blue
Plug-in bridge - FBS 4-5 BU - 3036893
Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-5 BU - 3036903
Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 10-5 BU - 3036916
Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: blue
Plug-in bridge - FBS 20-5 BU - 3036929
Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: blue
07/04/2018 Page 16 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Plug-in bridge - FBS 50-5 BU - 3032114
Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: blue
Labeled terminal marker
Zack marker strip - ZB 5 CUS - 0824962
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017
Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500,
mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020
Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15
x 10.5 mm
07/04/2018 Page 17 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Marker for terminal blocks - ZB 5,LGS:L1-N,PE - 1050415
Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into
tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Marker for terminal blocks - UC-TM 5 CUS - 0824581
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm
Marker for terminal blocks - UCT-TM 5 CUS - 0829595
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm
Zack Marker strip, flat - ZBF 5 CUS - 0825025
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 491 500, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
07/04/2018 Page 18 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100,
mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 - 20, 22 - 40, etc. up to 82 - 100,
mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Marker for terminal blocks - UC-TMF 5 CUS - 0824638
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 5 CUS - 0829658
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm
Neutral conductor rail
07/04/2018 Page 19 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Neutral busbar - NLS-CU 3/10 SN 1000MM - 0402174
Neutral busbar, width: 10 mm, height: 3 mm, DIN VDE 0611-4: 1991-02, material: Copper, tin-plated, length: 1000 mm,
color: silver
Partition plate
Partition plate - ATP-PTI/3 - 3213990
Partition plate, length: 103 mm, width: 2.2 mm, height: 49.3 mm, color: gray
Spacer plate - DP PS-5 - 3036725
Spacer plate, length: 22.4 mm, width: 5.2 mm, height: 29 mm, number of positions: 1, color: red
Planning and marking software
Software - CLIP-PROJECT ADVANCED - 5146040
Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.
Software - CLIP-PROJECT PROFESSIONAL - 5146053
Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and
labels for identifying terminal blocks, conductors and cables, and devices.
07/04/2018 Page 20 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Support
Support bracket - AB-UTI/3 - 3076038
Support bracket, Bracket for busbars, set every 20 cm, pitch: 200 mm, length: 93.5 mm, width: 2.2 mm, height: 51.2 mm,
number of positions: 1, color: blue
Terminal marking
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm
Marker for terminal blocks - UC-TM 5 - 0818108
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR,
BLUEMARK CLED, BLUEMARK LED, CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for
terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm
07/04/2018 Page 21 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Marker for terminal blocks - UCT-TM 5 - 0828734
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK ID, BLUEMARK ID COLOR, BLUEMARK CLED, BLUEMARK LED, TOPMARK NEO, mounting
type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm
Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.1 x 5.2 mm
Marker for terminal blocks - UC-TMF 5 - 0818153
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR,
BLUEMARK CLED, BLUEMARK LED, CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for
terminal block width: 5.2 mm, lettering field size: 4.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 5 - 0828744
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK ID, BLUEMARK ID COLOR, BLUEMARK CLED, BLUEMARK LED, TOPMARK NEO, mounting
type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
, rated voltage (III/2): , nominal current (Ex): , nominal voltage (Ex): , number of positions: 1, pitch: 5 mm, connection
method: , mounting: ,
07/04/2018 Page 22 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Test plugs - PS-5 - 3030983
Test plugs, color: red
Test plugs - PS-5/2,3MM RD - 3038723
Test plugs, color: red
Test socket
Test adapter - PAI-4-FIX-5/6 BU - 3035975
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 OG - 3035974
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 YE - 3035977
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
07/04/2018 Page 23 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Test adapter - PAI-4-FIX-5/6 RD - 3035976
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GN - 3035978
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BK - 3035980
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GY - 3035982
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 VT - 3035979
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
07/04/2018 Page 24 / 25
https://www.phoenixcontact.com/us/products/3076031
Installation level terminal block - UTI 2,5-L/L - 3076031
Accessories
Test adapter - PAI-4-FIX-5/6 BN - 3035981
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 WH - 3035983
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
07/04/2018 Page 25 / 25
