3100318

https://www.phoenixcontact.com/gb/products/3100318 Ground modular terminal block - MT 1,5-PE - 3100318 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Ground modular terminal block, Connection method: Screw connection, Cross section: 0.14 mm² - 1.5 mm², AWG: 26 - 16, Width: 4.2 mm, Color: green-yellow, Mounting type: NS 15 Why buy this product  Corrosion-free terminal points  Low contact resistance  Captive terminal block screws  Green-yellow housing Key Commercial Data Packing unit 50 STK Minimum order quantity 50 STK GTIN GTIN 4017918099268 Weight per Piece (excluding packing) 2.900 g Custom tariff number 85369010 Country of origin Turkey Technical data General Note When aligning with a feed-through terminal block of the same shape, an end cover must be interposed for insulation voltages of > 320 V Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 1.5 mm² Color green-yellow Insulating material PA Flammability rating according to UL 94 V0 12/28/2016   Page 1 / 8 https://www.phoenixcontact.com/gb/products/3100318 Ground modular terminal block - MT 1,5-PE - 3100318 Technical data General Rated surge voltage 4 kV Degree of pollution 3 Overvoltage category III Insulating material group I Open side panel No Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 4.2 mm Length 22 mm Height NS 15 23.5 mm Connection data Note Please observe the current carrying capacity of the DIN rails. Connection method Screw connection Connection in acc. with standard IEC 60947-7-2 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 16 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1.5 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 16 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 0.75 mm² 12/28/2016   Page 2 / 8 https://www.phoenixcontact.com/gb/products/3100318 Ground modular terminal block - MT 1,5-PE - 3100318 Technical data Connection data Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 0.75 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 0.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 0.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 0.34 mm² Stripping length 6 mm Internal cylindrical gage A1 Screw thread M2 Tightening torque, min 0.22 Nm Tightening torque max 0.25 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-2 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141118 eCl@ss 4.1 27141118 eCl@ss 5.0 27141118 eCl@ss 5.1 27141118 eCl@ss 6.0 27141141 eCl@ss 7.0 27141141 eCl@ss 8.0 27141141 eCl@ss 9.0 27141141 12/28/2016   Page 3 / 8 https://www.phoenixcontact.com/gb/products/3100318 Ground modular terminal block - MT 1,5-PE - 3100318 Classifications ETIM ETIM 2.0 EC000901 ETIM 3.0 EC000901 ETIM 4.0 EC000901 ETIM 5.0 EC000901 ETIM 6.0 EC000901 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / BV / CCA / EAC / EAC / DNV GL Ex Approvals EAC Ex Approval details CSA    http://www.csagroup.org/services/testingand-certification/certified-product-listing/     mm²/AWG/kcmil 28-14 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B D mm²/AWG/kcmil 30-14 30-14 BV    13631  http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials  FILE E 60425  07774/D0 BV 12/28/2016   Page 4 / 8 https://www.phoenixcontact.com/gb/products/3100318 Ground modular terminal block - MT 1,5-PE - 3100318 Approvals CCA      mm²/AWG/kcmil 1.5    NTR-NL 4243 EAC      EAC-Zulassung EAC      7500651.22.01.00246  https://www.dnvgl.com/  TAE00001CT DNV GL  Accessories Accessories DIN rail DIN rail, unperforated - NS 15 UNPERF 2000MM - 1401695 DIN rail, material: Steel, unperforated, height 5.5 mm, width 15 mm, length: 2 m     DIN rail perforated - NS 15 PERF 2000MM - 1401682 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 5.5 mm, width 15 mm, length: 2000 mm     DIN rail perforated - NS 15 AL PERF 2000MM - 1401763 DIN rail, material: Aluminum, perforated, height 5.5 mm, width 15 mm, length: 2 m     12/28/2016   Page 5 / 8 https://www.phoenixcontact.com/gb/products/3100318 Ground modular terminal block - MT 1,5-PE - 3100318 Accessories DIN rail perforated - NS 15 WH PERF 2000MM - 1204096 DIN rail, material: steel, perforated, height 5.5 mm, width 15 mm, length: 2 m     Labeled terminal marker Zack Marker strip, flat - ZBF 4 CUS - 0825023 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 4.2 mm, Lettering field: 4.2 x 5.2 mm     Zack Marker strip, flat - ZBF 4,LGS:FORTL.ZAHLEN - 0808626 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 100, Mounting type: Snap into flat marker groove, for terminal block width: 4 mm, Lettering field: 4.2 x 5.2 mm     Zack Marker strip, flat - ZBF 4,QR:FORTL.ZAHLEN - 0808820 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 100, Mounting type: Snap into flat marker groove, for terminal block width: 4 mm, Lettering field: 4.2 x 5.2 mm     Zack Marker strip, flat - ZBF 4,LGS:GERADE ZAHLEN - 0810818 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 2 - 20, 22 - 40, etc. up to 82 100, Mounting type: Snap into flat marker groove, for terminal block width: 4 mm, Lettering field: 5.15 x 4.15 mm     12/28/2016   Page 6 / 8 https://www.phoenixcontact.com/gb/products/3100318 Ground modular terminal block - MT 1,5-PE - 3100318 Accessories Zack Marker strip, flat - ZBF 4,LGS:UNGERADE ZAHLEN - 0810850 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, Mounting type: Snap into flat marker groove, for terminal block width: 4 mm, Lettering field: 5.15 x 4.15 mm     Marker for terminal blocks - UC-TMF 4 CUS - 0824630 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 4.2 mm, Lettering field: 3.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 4 CUS - 0829651 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 4.2 mm, Lettering field: 3.4 x 4.7 mm     Screwdriver tools Screwdriver - SZS 0,4X2,5 VDE - 1205037 Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip     Terminal marking Zack Marker strip, flat - ZBF 4:UNBEDRUCKT - 0808587 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat marker groove, for terminal block width: 4 mm, Lettering field: 4.2 x 5.2 mm     12/28/2016   Page 7 / 8 https://www.phoenixcontact.com/gb/products/3100318 Ground modular terminal block - MT 1,5-PE - 3100318 Accessories Marker for terminal blocks - UC-TMF 4 - 0818166 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, THERMOMARK CARD, THERMOMARK PRIME, Mounting type: Snap into flat marker groove, for terminal block width: 4.2 mm, Lettering field: 3.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 4 - 0828742 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into flat marker groove, for terminal block width: 4.2 mm, Lettering field: 3.4 x 4.7 mm     Test socket Test adapter - PAI-4 - 3030925 4 mm test adapter, for all terminal blocks with 4.2 mm to 8.2 mm pitch     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/28/2016   Page 8 / 8