3101139

https://www.phoenixcontact.com/us/products/3101139 Feed-through terminal block - UDMTK 5-TWIN-P/P BU - 3101139 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Feed-through terminal block, Connection type: Screw connection, Cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, Nominal current: 8 A, Nominal voltage: 400 V, Length: 76.5 mm, Width: 6.2 mm, Color: blue, Assembly: NS 35/7,5, NS 35/15, NS 32 The illustration shows version UDMTK 5-TWIN-P/P in gray Product Features  Space-saving design just 6.2 mm wide  Closed housing of double-level terminal blocks  User-friendly disconnect knife operation Key commercial data Packing unit 11 Weight per Piece (excluding packing) 28.68 GRM Custom tariff number 85369010 Country of origin Turkey Technical data General Number of levels 2 Number of connections 3 Color blue Insulating material PA Inflammability class according to UL 94 V2 Maximum load current 8 A (with 4 mm² conductor cross section) Rated surge voltage 4 kV Pollution degree 3 Surge voltage category III Insulating material group I 20.11.2013   Page 1 / 13 https://www.phoenixcontact.com/us/products/3101139 Feed-through terminal block - UDMTK 5-TWIN-P/P BU - 3101139 Technical data General Connection in acc. with standard IEC 60947-7-1 Nominal current IN 8 A (The current supply from the system can take a maximum of 16 A. The current carrying capacity of the branches is a maximum of 8 A each.) Nominal voltage UN 400 V Open side panel nein Dimensions Width 6.2 mm Length 76.5 mm Height NS 35/7,5 68.5 mm Height NS 35/15 76 mm Height NS 32 73 mm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 4 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 4 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. Connection method Screw connection Stripping length 8 mm Internal cylindrical gage A4 Screw thread M3 20.11.2013   Page 2 / 13 https://www.phoenixcontact.com/us/products/3101139 Feed-through terminal block - UDMTK 5-TWIN-P/P BU - 3101139 Technical data Connection data Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals GOST / CSA / UL Recognized / cUL Recognized / GOST / cULus Recognized Ex Approvals 20.11.2013   Page 3 / 13 https://www.phoenixcontact.com/us/products/3101139 Feed-through terminal block - UDMTK 5-TWIN-P/P BU - 3101139 Approvals Approvals submitted Approval details GOST  CSA      mm²/AWG/kcmil 28-12 Nominal current IN 8A Nominal voltage UN 300 V UL Recognized      mm²/AWG/kcmil 26-12 Nominal current IN 8A Nominal voltage UN 300 V cUL Recognized      mm²/AWG/kcmil 26-12 Nominal current IN 8A Nominal voltage UN 300 V GOST  20.11.2013   Page 4 / 13 https://www.phoenixcontact.com/us/products/3101139 Feed-through terminal block - UDMTK 5-TWIN-P/P BU - 3101139 Approvals cULus Recognized  Accessories Accessories End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End clamp - E/UK - 1201442 End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail     20.11.2013   Page 5 / 13 https://www.phoenixcontact.com/us/products/3101139 Feed-through terminal block - UDMTK 5-TWIN-P/P BU - 3101139 Accessories End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     Labeled terminal marker Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Mounting rail DIN rail - NS 32 PERF 2000MM - 1201002 G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m     20.11.2013   Page 6 / 13 https://www.phoenixcontact.com/us/products/3101139 Feed-through terminal block - UDMTK 5-TWIN-P/P BU - 3101139 Accessories DIN rail - NS 32 UNPERF 2000MM - 1201015 G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m     DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     20.11.2013   Page 7 / 13 https://www.phoenixcontact.com/us/products/3101139 Feed-through terminal block - UDMTK 5-TWIN-P/P BU - 3101139 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     20.11.2013   Page 8 / 13 https://www.phoenixcontact.com/us/products/3101139 Feed-through terminal block - UDMTK 5-TWIN-P/P BU - 3101139 Accessories DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35)     DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm     20.11.2013   Page 9 / 13 https://www.phoenixcontact.com/us/products/3101139 Feed-through terminal block - UDMTK 5-TWIN-P/P BU - 3101139 Accessories DIN rail - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m     Partition plate 20.11.2013   Page 10 / 13 https://www.phoenixcontact.com/us/products/3101139 Feed-through terminal block - UDMTK 5-TWIN-P/P BU - 3101139 Accessories Separating plate - TP-UDMTK 5-TWIN - 3100240 Separating plate, Length: 103 mm, Width: 2 mm, Height: 70.1 mm, Color: gray     Screwdriver tools Screwdriver - SZG 0,6X3,5 VDE - 1205121 Screwdriver, slot-headed, graded, for test socket screws, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Marker cards - SBS 6:UNBEDRUCKT - 1007222 Marker cards, Card, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 6 x 6.1 mm     Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     20.11.2013   Page 11 / 13 https://www.phoenixcontact.com/us/products/3101139 Feed-through terminal block - UDMTK 5-TWIN-P/P BU - 3101139 Accessories Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Drawings Circuit diagram 20.11.2013   Page 12 / 13 https://www.phoenixcontact.com/us/products/3101139 © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 20.11.2013   Page 13 / 13