3201945

AI-XL… Ferrules With Extra Large Insulating Collar CLIPLINE Data Sheet 103092_00_en © PHOENIX CONTACT - 09/2006 Description Short-circuit-proof cables, e.g., type NSGFÖU, are usually crimped with ferrules without an insulating collar. The function of the insulating collar is then often performed by a piece of shrink tube. This complicated process is simplified considerably by AI-XL… ferrules. These ferrules have an insulating collar with a diameter around twice the size as that of a ferrule according to DIN 46228-4. Optimum connection is ensured when crimped with the appropriate tools from Phoenix Contact. Make sure you always use the latest documentation. It can be downloaded at www.download.phoenixcontact.com. A conversion table is available on the Internet at www.download.phoenixcontact.com/general/7000_en_00.pdf. This data sheet is valid for all products listed on the following page: AI-XL… Dimensions and Ordering Data Ferrules With Extra Large Insulating Collar Cross Section l1 l2 d1 s1 Order No. 8.0 mm 1.8 mm 0.15 mm s2 0.3 mm Type 17.5 mm d2 6.9 mm Color 1.5 mm2 Black AI-XL 1,5- 8 BK 3201916 Pcs./Pck. 100 1.5 mm2 19.5 mm 10.0 mm 1.8 mm 0.15 mm 6.9 mm 0.3 mm Black AI-XL 1,5-10 BK 3201974 100 2.5 mm2 17.5 mm 8.0 mm 2.3 mm 0.15 mm 7.8 mm 0.3 mm Blue AI-XL 2,5- 8 BU 3201929 100 2.5 mm2 21.5 mm 12.0 mm 2.3 mm 0.15 mm 7.8 mm 0.3 mm Blue AI-XL 2,5-12 BU 3201987 100 4 mm2 19.5 mm 10.0 mm 2.9 mm 0.2 mm 7.8 mm 0.3 mm Gray AI-XL 4 -10 GY 3201932 100 6 mm2 23.0 mm 12.0 mm 3.6 mm 0.2 mm 8.3 mm 0.4 mm Yellow AI-XL 6 -12 YE 3201945 100 10 mm2 24.0 mm 12.0 mm 4.6 mm 0.2 mm 9.8 mm 0.4 mm Red AI-XL 10 -12 RD 3201958 100 16 mm2 25.5 mm 12.0 mm 6.0 mm 0.2 mm 12.0 mm 0.4 mm Blue AI-XL 16 -12 BU 3201961 100 I1 l1 = l2 = d1 = s1 = d2 = s2 = Total length Sleeve length Inside diameter of sleeve Wall thickness of sleeve Inside diameter of insulating collar Wall thickness of insulating collar s 2 s 1 d 2 d 1 I2 Figure 1 Dimensions (tolerances according to DIN 46228-4) Technical Data General Data Material Collar Polypropylene PP (UL94 HB), heat resistant up to 105°C Sleeve E-CU, tin-plated surface © PHOENIX CONTACT 09/2006 103092_00_en PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany Phone: +49 - 52 35 - 30 0 • Fax: +49 - 52 35 - 34 12 00 www.phoenixcontact.com 2