3202601

A… Ferrules Without Insulating Collar According to DIN 46228-1 Data Sheet 103088_00_en m CLIPLINE © PHOENIX CONTACT - 09/2006 co Description on l in ec om po ne nt The ferrules enable correct crimping using appropriate crimping tools from Phoenix Contact. s. A… ferrules without insulating collar are made from soft electrolytic copper (E-CU) with tin plating. The dimensions of the ferrules correspond to DIN 46228-1. Make sure you always use the latest documentation. It can be downloaded at www.download.phoenixcontact.com. A conversion table is available on the Internet at www.download.phoenixcontact.com/general/7000_en_00.pdf. This data sheet is valid for all products listed on the following page: A… Dimensions and Ordering Data Ferrules Without Insulating Collar According to DIN 46228-1 Cross Section l1 l2 d1 s 0.25 mm2 5.0 mm 0.25 mm2 7.0 mm – 0.8 mm 0.15 mm 0.34 mm2 7.0 mm – 0.9 mm 0.15 mm 0.5 mm2 6.0 mm 5.3 mm 1.0 mm 0.15 mm 0.5 mm2 8.0 mm 7.3 mm 1.0 mm 0.15 mm 0.8 mm d2 1.7 mm 0.15 mm Type Order No. Pcs./Pck. A 0,25- 51 3202465 1000 1.7 mm A 0,25- 71 3202478 1000 1.8 mm A 0,34- 71 3009202 1000 2.1 mm A 0,5 - 6 3200218 1000 2.1 mm A 0,5 - 81 3202481 1000 10.0 mm 9.3 mm 1.0 mm 0.15 mm 2.1 mm A 0,5 -10 3202494 1000 6.0 mm 5.3 mm 1.2 mm 0.15 mm 2.3 mm A 0,75- 6 3200221 1000 0.75 mm2 8.0 mm 7.3 mm 1.2 mm 0.15 mm 2.3 mm A 0,75- 81 3202504 1000 0.75 mm 10.0 mm 9.3 mm 1.2 mm 0.15 mm 2.3 mm A 0,75-10 3200234 1000 1 mm2 6.0 mm 5.3 mm 1.4 mm 0.15 mm 2.5 mm A 1 -6 3200247 1000 1 mm2 8.0 mm 7.3 mm 1.4 mm 0.15 mm 2.5 mm A 1 - 81 3202517 1000 10.0 mm 9.3 mm 1.4 mm 0.15 mm 2.5 mm A 1 -10 3200250 1000 1.5 mm2 7.0 mm 6.0 mm 1.7 mm 0.15 mm 2.8 mm A 1,5 - 7 3200263 1000 1.5 mm2 10.0 mm 9.0 mm 1.7 mm 0.15 mm 1000 1.5 mm2 12.0 mm 11.0 mm 1.7 mm 0.15 mm 1.5 mm2 15.0 mm 14.0 mm 1.7 mm 0.15 mm co A 1,5 -10 3200276 A 1,5 -12 3202588 1000 2.8 mm A 1,5 -15 3202591 1000 nt s. 2.8 mm 2.8 mm 1.5 mm2 18.0 mm 17.0 mm 1.7 mm 0.15 mm 2.8 mm A 1,5 -18 3202601 1000 2.5 mm2 7.0 mm 6.0 mm 2.2 mm 0.15 mm 3.4 mm A 2,5 - 7 3200289 1000 2.5 mm2 12.0 mm 11.0 mm 2.2 mm 2.5 mm2 18.0 mm 17.0 mm 2.2 mm ne 1 mm2 m 0.5 mm2 0.75 mm2 2 0.15 mm 3.4 mm A 2,5 -12 3200292 1000 0.15 mm 3.4 mm A 2,5 -18 3202821 1000 0.2 mm 4.0 mm A 4 -9 3200302 1000 0.2 mm 4.0 mm A 4 -12 3200315 1000 9.0 mm 8.0 mm 2.8 mm 12.0 mm 11.0 mm 2.8 mm 4 mm2 18.0 mm 17.0 mm 2.8 mm 0.2 mm 4.0 mm A 4 -18 3202834 1000 6 mm2 10.0 mm 9.0 mm 3.5 mm 0.2 mm 4.7 mm A 6 -10 3202520 500 po 4 mm2 4 mm2 12.0 mm 11.0 mm 3.5 mm 0.2 mm 4.7 mm A 6 -12 3200328 500 12.0 mm 11.8 mm 4.5 mm 0.2 mm 5.8 mm A 10 -12 3200331 500 10 mm2 18.0 mm 16.8 mm 4.5 mm 0.2 mm 5.8 mm A 10 -18 3200344 500 16 mm2 12.0 mm 10.5 mm 5.8 mm 0.2 mm 7.5 mm A 16 -121 3200425 100 om 6 mm2 10 mm2 12.0 mm 10.0 mm 7.3 mm 0.2 mm 9.5 mm A 25 -12 3200357 100 15.0 mm 13.0 mm 7.3 mm 0.2 mm 9.5 mm A 25 -15 3200360 100 25 mm2 18.0 mm 16.0 mm 7.3 mm 0.2 mm 9.5 mm A 25 -18 3200373 100 25 mm2 20.0 mm 18.0 mm 7.3 mm 0.2 mm 9.5 mm A 25 -201 3200386 100 35 mm2 18.0 mm 16.0 mm 8.3 mm 0.2 mm 11.0 mm A 35 -18 3200399 100 35 mm2 20.0 mm 18.0 mm 8.3 mm 0.2 mm 11.0 mm A 35 -201 3200409 100 in ec 25 mm2 25 mm2 on l 1 – These ferrules are not included in DIN 46228-1. I 1 s d 2 d 1 I2 Figure 1 l1 = l2 = d1 = s= d2 = Total length Sleeve length Inside diameter of sleeve Wall thickness of sleeve Inside diameter of collar Dimensions (tolerances according to DIN 46228-1) © PHOENIX CONTACT 09/2006 103088_00_en PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany Phone: +49 - 52 35 - 30 0 • Fax: +49 - 52 35 - 34 12 00 www.phoenixcontact.com 2