3203163

AI…GB Ferrules With Insulating Collar for Wires With Increased Insulation CLIPLINE Data Sheet 103083_01_en © PHOENIX CONTACT - 09/2006 Description AI…GB ferrules enable practical crimping of wires with increased insulation. Due to the increased diameter of the insulating collar this type of ferrule is ideal for use with AWG cables. The metal insulating sleeve is made from a soft electrolytic copper with tin plating, which ensures optimum connection when crimped with the appropriate Phoenix Contact tools. The insulating collar made from polypropylene, which is resistant to extreme heat, insulates and simplifies fitting onto the wire without having to splice the individual litz wires. Make sure you always use the latest documentation. It can be downloaded at www.download.phoenixcontact.com. A conversion table is available on the Internet at www.download.phoenixcontact.com/general/7000_en_00.pdf. This data sheet is valid for all products listed on the following page: AI…GB Dimensions and Ordering Data Ferrules With Insulating Collar for Wires With Increased Insulation Cross Section l1 l2 d1 s1 d2 s2 Color 0.5 mm2 13.5 mm 8.0 mm 1.1 mm 0.15 mm 3.0 mm 0.3 mm White Type Order No. Pcs./Pck. AI 0,5- 8 WH-GB 1208966 100 100 0.5 mm2 15.5 mm 10.0 mm 1.1 mm 0.15 mm 3.0 mm 0.3 mm White AI 0,5-10 WH-GB 3203150 0.75 mm2 14.0 mm 8.0 mm 1.3 mm 0.15 mm 3.4 mm 0.3 mm Gray AI 0,75- 8 GY-GB 1208979 100 0.75 mm2 16.0 mm 10.0 mm 1.3 mm 0.15 mm 3.4 mm 0.3 mm Gray AI 0,75-10 GY-GB 3203163 100 100 1 mm2 14.0 mm 8.0 mm 1.5 mm 0.15 mm 3.4 mm 0.3 mm Red AI 1-8 RD-GB 1208982 1 mm2 16.0 mm 10.0 mm 1.5 mm 0.15 mm 3.4 mm 0.3 mm Red AI 1-10 RD/1000 GB 1208869 1000 1.5 mm2 14.0 mm 8.0 mm 1.8 mm 0.15 mm 3.7 mm 0.3 mm Black AI 1,5-8 BK-GB-1000 3202892 1000 1.5 mm2 16.0 mm 10.0 mm 1.8 mm 0.15 mm 3.7 mm 0.3 mm Black AI 1,5-10 BK/1000 GB 1208872 1000 I1 l1 = l2 = d1 = s1 = d2 = s2 = Total length Sleeve length Inside diameter of sleeve Wall thickness of sleeve Inside diameter of insulating collar Wall thickness of insulating collar s s 2 1 d 2 d 1 I2 Figure 1 Dimensions (tolerances according to DIN 46228-4) Technical Data General Data Material Collar Polypropylene PP (UL94 HB), heat resistant up to 105°C Sleeve E-CU, tin-plated surface © PHOENIX CONTACT 09/2006 103083_01_en PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany Phone: +49 - 52 35 - 30 0 • Fax: +49 - 52 35 - 34 12 00 www.phoenixcontact.com 2