Fast Connection Feed-Through Terminal Blocks
QUICKON-QTC
A major feature of the QUICKON feed-through
terminal blocks QTC 1,5 is their compact design.
The clear and space-saving front connection of the
QTC series offers additional space for wiring between
the cable ducts.
The dual jumper channel not only allows individual
chain bridging, but also reduction bridging from the
standard ST 2,5 to ST 35 terminal blocks. Potential
supply and distribution is easily implemented in this
way using RB ST... adapter bridges.
A special feature of the compact double-level version
QTTCB 1,5 is the dual jumper channel for each level.
This feature allows simultaneous bridging and testing.
The ground terminal blocks with the same shape and
pitch as QTC ... and QTTCB terminal blocks round off
the range.
Correct mechanic and electrical contacting is
guaranteed by simply snapping the terminal block onto
the DIN rail.
The QTC ... and QTTCB... ground terminal blocks
fulfill all requirements of IEC 60 947-7-2.
These are in particular:
– Low contact resistances,
– Corrosion-proof terminal points and PE feet,
– Green-yellow housing and
– Additional options for marking.
Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany
Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com
Local Contact: www.phoenixcontact.com/salesnetwork
Fast Connection
Feed-Through Terminal Block
QTC 1,5
(IEC)
[mm2]
rigid
solid
flexible
stranded
AWG
Connection data
0.25-1.51) 0.25-1.51)
1) See below under "Technical data".
I
[A]
24-161) 17.5
U
[V]
800
Technical data
Type
Order No.
Pcs.
Pkt.
QTC 1,5
QTC 1,5 BU
32 05 01 9
32 05 02 2
50
50
D-QTC 1,5
32 05 16 1
50
30 30 16 1
30 30 17 4
30 30 18 7
30 30 19 0
30 30 21 3
30 30 22 6
50
50
50
50
10
10
RB ST 6-(2,5/4)
30 30 86 0
50
(4) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP-QTC
32 06 20 9
50
(5) Test adapter, for 4 mm ∅ test plug PS
and 4 mm ∅ safety test plugs,
making contact in the bridge shaft
PAI 4
30 30 92 5
10
MPS-IH RD
02 01 67 6
10
PS-5
30 30 98 3
10
STP 5-2-ZB
30 37 64 3
100
SZF 1 - 0,6 x 3,5
12 04 51 7
10
Terminal block,
for mounting on 3
gray
blue
(1) End cover
(2) Plug-in bridge, for
cross-connections in the
terminal center,
color: red
terminal width 5.2
gray
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
FBS 2-5
FBS 3-5
FBS 4-5
FBS 5-5
FBS 10-5
FBS 20-5
(3) Adapter bridge, for
connecting an ST... to QTC 1,5...
(6) 2.3 mm ∅ test plug 2), consisting of
metal part and red insulating sleeve
(7) Modular test plug, can be labeled with ZBF 5
(8) Double marker carrier, snaps into
QTC fast connection terminal blocks,
can be labeled with ZB 5 and ZBF 5
gray
(9) Screwdriver, for
actuating the fast connection
Imax.: 24 A
24 A
24 A
24 A
24 A
24 A
(10) Zack strip, flat,
for center and external labeling
white
ZBF 5:UNBEDRUCKT
08 08 64 2
10
(11) Zack strip,
10-section, for center labeling
white
ZB 5:UNBEDRUCKT
10 50 00 4
10
Dimensions
Width / length / end cover width
[mm]
Height (NS 35/7,5 / NS 35/15)
[mm]
Technical data in accordance with IEC/ DIN VDE
Maximum load current / cross section
[A] / [mm2]
Rated surge voltage / contamination class
[kV] / –
Surge voltage category / insulation material group
–/–
Connection capacity
Core insulation
Single/multi/fine strand H05V-U/R/K // H07V-U/R/K
[mm2]
Halogen-free
H05Z-U/R/K // H07Z-U/R/K
[mm2]
Fine strand/superfine strand (litz wires Ø ≥ 0.1 mm)
[mm2]
(litz wires Ø ≥ 0.19 mm)
AWG
Circuitry
min. 100x same cross section
[mm2]
Insulating material
Inflammability class in acc. with UL 94
Approval data (UL and CSA/CUL)
Nominal voltage / current / conductor sizes
UL: [V] / [A] / AWG
CSA/CUL: [V] / [A] / AWG
2) Further colors are available on request.
3) Further types of insulation on request.
Phoenix Contact page 2 of 9
5.2 / 58.8 / 2.2
39.3 / 46.8
17.5 / 1.5
8/3
III / I
PVC / PE 3)
0.5-1.0 // 1.5
0.5-1.0 // 1.5
0.25 - 0.34
24-16
0.25-1.5
PA
V0
applied for
applied for
Fast Connection
Feed-Through Terminal Block
QTC 1,5-TWIN
(IEC)
[mm2]
rigid
solid
flexible
stranded
AWG
I
[A]
U
[V]
Connection data
0.25-1.51) 0.25-1.51) 24-161) 17.5* 800
1) See below under "Technical data".
* The max. load current must not be exceeded by the total current of all connected
conductors.
Technical data
Type
Order No.
Pcs.
Pkt.
QTC 1,5-TWIN
QTC 1,5-TWIN BU
32 05 04 8
32 05 05 1
50
50
D-QTC 1,5-TWIN
32 05 19 0
50
DS-QTC 1,5
32 05 20 0
50
30 30 16 1
30 30 17 4
30 30 18 7
30 30 19 0
30 30 21 3
30 30 22 6
50
50
50
50
10
10
RB ST 6-(2,5/4)
30 30 86 0
50
(5) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP-QTC TWIN
32 06 23 8
50
(6) Test adapter, for 4 mm ∅ test plug PS
and 4 mm ∅ safety test plugs,
making contact in the bridge shaft
PAI 4
30 30 92 5
10
MPS-IH RD
02 01 67 6
10
PS-5
30 30 98 3
10
STP 5-2-ZB
30 37 64 3
100
SZF 1 - 0,6 x 3,5
12 04 51 7
10
Terminal block,
for mounting on 3
gray
blue
(1) End cover
terminal width 5.2
gray
(2) End cover segment, serves for covering
multi-conductor terminal blocks when
gray
two-conductor terminal blocks are aligned
(3) Plug-in bridge, for
cross-connections in the
terminal center,
color: red
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
FBS 2-5
FBS 3-5
FBS 4-5
FBS 5-5
FBS 10-5
FBS 20-5
(4) Adapter bridge, for
connecting an ST... to QTC 1,5...
(7) 2.3 mm ∅ test plug 2), consisting of
metal part and red insulating sleeve
(8) Modular test plug, can be labeled with ZBF 5
(9) Double marker carrier, snaps into
QTC fast connection terminal blocks,
can be labeled with ZB 5 and ZBF 5
gray
(10) Screwdriver, for
actuating the fast connection
Imax.: 24 A
24 A
24 A
24 A
24 A
24 A
(11) Zack strip, flat, for center and external labeling
white
ZBF 5:UNBEDRUCKT
08 08 64 2
10
(12) Zack strip, 10-section, for center labeling
white
ZB 5:UNBEDRUCKT
10 50 00 4
10
Dimensions
Width / length / end cover width
[mm]
Height (NS 35/7,5 / NS 35/15)
[mm]
Technical data in accordance with IEC/ DIN VDE
Maximum load current / cross section
[A] / [mm2]
Rated surge voltage / contamination class
[kV] / –
Surge voltage category / insulation material group
–/–
Connection capacity
Core insulation
Single/multi/fine strand H05V-U/R/K // H07V-U/R/K
[mm2]
Halogen-free
H05Z-U/R/K // H07Z-U/R/K
[mm2]
Fine strand/superfine strand (litz wires Ø ≥ 0.1 mm)
[mm2]
(litz wires Ø ≥ 0.19 mm)
AWG
Circuitry
min. 100x same cross section
[mm2]
Insulating material
Inflammability class in acc. with UL 94
Approval data (UL and CSA/CUL)
Nominal voltage / current / conductor sizes
UL: [V] / [A] / AWG
CSA/CUL: [V] / [A] / AWG
2
3
) Further colors are available on request.
) Further types of insulation on request.
Phoenix Contact page 3 of 9
5.2 / 76.4 / 2.2
39.3 / 46.8
17.5 / 1.5
8/3
III / I
PVC / PE 3)
0.5-1.0 // 1.5
0.5-1.0 // 1.5
0.25 - 0.34
24-16
0.25-1.5
PA
V0
applied for
applied for
Fast Connection
Feed-Through Terminal Block
QTC 1,5-QUATTRO
(IEC)
[mm2]
rigid
solid
flexible
stranded
AWG
I
[A]
U
[V]
Connection data
0.25-1.51) 0.25-1.51) 24-161) 17.5* 800
1) See below under "Technical data".
* The max. load current must not be exceeded by the total current of all connected
conductors.
Technical data
Type
Order No.
Pcs.
Pkt.
QTC 1,5-QUATTRO
QTC 1,5-QUATTRO BU
32 05 07 7
32 05 08 0
50
50
D-QTC 1,5-QUATTRO
32 05 17 4
50
DS-QTC 1,5
32 05 20 0
50
30 30 16 1
30 30 17 4
30 30 18 7
30 30 19 0
30 30 21 3
30 30 22 6
50
50
50
50
10
10
RB ST 6-(2,5/4)
30 30 86 0
50
(5) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP-QTC QUATTRO
32 06 22 5
50
(6) Test adapter, for 4 mm ∅ test plug PS
and 4 mm ∅ safety test plugs,
making contact in the bridge shaft
PAI 4
30 30 92 5
10
MPS-IH RD
02 01 67 6
10
PS-5
30 30 98 3
10
STP 5-2-ZB
30 37 64 3
100
SZF 1 - 0,6 x 3,5
12 04 51 7
10
Terminal block,
for mounting on 3
gray
blue
(1) End cover
terminal width 5.2
gray
(2) End cover segment, serves for covering
multi-conductor terminal blocks when
gray
two-conductor terminal blocks are aligned
(3) Plug-in bridge, for
cross-connections in the
terminal center,
color: red
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
FBS 2-5
FBS 3-5
FBS 4-5
FBS 5-5
FBS 10-5
FBS 20-5
(4) Adapter bridge, for
connecting an ST... to QTC 1,5...
(7) 2.3 mm ∅ test plug 2), consisting of
metal part and red insulating sleeve
(8) Modular test plug, can be labeled with ZBF 5
(9) Double marker carrier, snaps into
QTC fast connection terminal blocks,
can be labeled with ZB 5 and ZBF 5
gray
(10) Screwdriver, for
actuating the fast connection
Imax.: 24 A
24 A
24 A
24 A
24 A
24 A
(11) Zack strip, flat, for center and external labeling
white
ZBF 5:UNBEDRUCKT
08 08 64 2
10
(12) Zack strip, 10-section, for center labeling
white
ZB 5:UNBEDRUCKT
10 50 00 4
10
Dimensions
Width / length / end cover width
[mm]
Height (NS 35/7,5 / NS 35/15)
[mm]
Technical data in accordance with IEC/ DIN VDE
Maximum load current / cross section
[A] / [mm2]
Rated surge voltage / contamination class
[kV] / –
Surge voltage category / insulation material group
–/–
Connection capacity
Core insulation
Single/multi/fine strand H05V-U/R/K // H07V-U/R/K
[mm2]
Halogen-free
H05Z-U/R/K // H07Z-U/R/K
[mm2]
Fine strand/superfine strand (litz wires Ø ≥ 0.1 mm)
[mm2]
(litz wires Ø ≥ 0.19 mm)
AWG
Circuitry
min. 100x same cross section
[mm2]
Insulating material
Inflammability class in acc. with UL 94
Approval data (UL and CSA/CUL)
Nominal voltage / current / conductor sizes
UL: [V] / [A] / AWG
CSA/CUL: [V] / [A] / AWG
2
3
) Further colors are available on request.
) Further types of insulation on request.
Phoenix Contact page 4 of 9
5.2 / 94.0 / 2.2
39.3 / 46.8
17.5 / 1.5
8/3
III / I
PVC / PE 3)
0.5-1.0 // 1.5
0.5-1.0 // 1.5
0.25 - 0.34
24-16
0.25-1.5
PA
V0
applied for
applied for
Fast Connection Double-Level
Feed-Through Terminal Block
QTTCB 1,5
(IEC)
[mm2]
rigid
solid
flexible
stranded
AWG
I
[A]
U
[V]
Connection data
0.25-1.51) 0.25-1.51) 24-161) 17.5 800
1) See below under "Technical data".
* The max. load current must not be exceeded by the total current of all connected
conductor.
Technical data
Type
Order No.
Pcs.
Pkt.
QTTCB 1,5
QTTCB 1,5 BU
32 05 11 6
32 05 12 9
50
50
Terminal block,
as above, however, with equipotential
gray terminal width 5.2
bonding between the levels, for mounting on 3
QTTCB 1,5-PV *
32 05 15 3
50
Terminal block,
as above, however, with diode 1N 4007 gray
from top to bottom, for mounting on 3
QTTCB 1,5-DIO/O-U
32 06 24 1
50
D-QTTCB 1,5
32 05 18 7
50
30 30 16 1
30 30 17 4
30 30 18 7
30 30 19 0
30 30 21 3
30 30 22 6
50
50
50
50
10
10
Terminal block,
for mounting on 3
gray
blue
(1) End cover
(2) Plug-in bridge, for
cross-connections in the
terminal center,
color: red
terminal width 5.2
terminal width 5.2
gray
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
FBS 2-5
FBS 3-5
FBS 4-5
FBS 5-5
FBS 10-5
FBS 20-5
Imax.: 24 A
24 A
24 A
24 A
24 A
24 A
(3) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP-QTTCB
32 06 23 8
50
(4) Test adapter, for 4 mm ∅ test plug PS
and 4 mm ∅ safety test plugs,
making contact in the bridge shaft
PAI 4
30 30 92 5
10
MPS-IH RD
02 01 67 6
10
PS-5
30 30 98 3
10
STP 5-2-ZB
30 37 64 3
100
SZF 1 - 0,6 x 3,5
12 04 51 7
10
(5) 2.3 mm ∅ test plug 2), consisting of
metal part and red insulating sleeve
(6) Modular test plug, can be labeled with ZBF 5
(7) Double marker carrier, snaps into
QTC fast connection terminal blocks,
can be labeled with ZB 5 and ZBF 5
gray
(8) Screwdriver, for
actuating the fast connection
(9) Zack strip, flat, for center and external labeling
white
ZBF 5:UNBEDRUCKT
08 08 64 2
10
(10) Zack strip, 10-section, for center labeling
white
ZB 5:UNBEDRUCKT
10 50 00 4
10
Dimensions
Width / length / end cover width
[mm]
Height (NS 35/7,5 / NS 35/15)
[mm]
Technical data in accordance with IEC/ DIN VDE
Maximum load current / cross section
[A] / [mm2]
Rated surge voltage / contamination class
[kV] / –
Surge voltage category / insulation material group
–/–
Connection capacity
Core insulation
Single/multi/fine strand H05V-U/R/K // H07V-U/R/K
[mm2]
Halogen-free
H05Z-U/R/K // H07Z-U/R/K
[mm2]
Fine strand/superfine strand (litz wires Ø ≥ 0.1 mm)
[mm2]
(litz wires Ø ≥ 0.19 mm)
AWG
Circuitry
min. 100x same cross section
[mm2]
Insulating material
Inflammability class in acc. with UL 94
Approval data (UL and CSA/CUL)
Nominal voltage / current / conductor sizes
UL: [V] / [A] / AWG
CSA/CUL: [V] / [A] / AWG
2
3
) Further colors are available on request.
) Further types of insulation on request.
Phoenix Contact page 5 of 9
5.2 / 99.6 / 2.2
49.9 / 47.5
17.5 / 1.5
6/3
III / I
PVC / PE 3)
0.5-1.0 // 1.5
0.5-1.0 // 1.5
0.25 - 0.34
24-16
0.25-1.5
PA
V0
applied for
applied for
Fast Connection
Ground Terminal Block
QTC 1,5-PE
(IEC)
[mm2]
rigid
solid
flexible
stranded
AWG
Connection data
0.25-1.51) 0.25-1.51) 24-161)
1) See below under "Technical data".
Current carrying capacity of the mounting rails, see CLIPLINE catalog.
Technical data
Type
Order No.
Pcs.
Pkt.
QTC 1,5-PE
32 05 03 5
50
D-QTC 1,5
32 05 16 1
50
FBS 2-5
FBS 3-5
FBS 4-5
FBS 5-5
FBS 10-5
FBS 20-5
30 30 16 1
30 30 17 4
30 30 18 7
30 30 19 0
30 30 21 3
30 30 22 6
50
50
50
50
10
10
(3) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP-QTC
32 06 20 9
50
(4) Test adapter, for 4 mm ∅ test plug PS
and 4 mm ∅ safety test plugs,
making contact in the bridge shaft
PAI 4
30 30 92 5
10
MPS-IH RD
02 01 67 6
10
PS-5
30 30 98 3
10
STP 5-2-ZB
30 37 64 3
100
SZF 1 - 0,6 x 3,5
12 04 51 7
10
Terminal block,
for mounting on 3
green-yellow
(1) End cover
(2) Plug-in bridge, for
cross-connections in the
terminal center,
color: red
terminal width 5.2
gray
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
(5) 2.3 mm ∅ test plug 2), consisting of
metal part and red insulating sleeve
(6) Modular test plug, can be labeled with ZBF 5
(7) Double marker carrier, snaps into
QTC fast connection terminal blocks,
can be labeled with ZB 5 and ZBF 5
gray
(8) Screwdriver, for
actuating the fast connection
(9) Zack strip, flat,
for center and external labeling
white
ZBF 5:UNBEDRUCKT
08 08 64 2
10
(10) Zack strip,
10-section, for center labeling
white
ZB 5:UNBEDRUCKT
10 50 00 4
10
Dimensions
Width / length / end cover width
[mm]
Height (NS 35/7,5 / NS 35/15)
[mm]
Technical data in accordance with IEC/ DIN VDE
Maximum load current / cross section
[A] / [mm2]
Rated surge voltage / contamination class
[kV] / –
Surge voltage category / insulation material group
–/–
Connection capacity
Core insulation
Single/multi/fine strand H05V-U/R/K // H07V-U/R/K
[mm2]
Halogen-free
H05Z-U/R/K // H07Z-U/R/K
[mm2]
Fine strand/superfine strand (litz wires Ø ≥ 0.1 mm)
[mm2]
(litz wires Ø ≥ 0.19 mm)
AWG
Circuitry
min. 100x same cross section
[mm2]
Insulating material
Inflammability class in acc. with UL 94
Approval data (UL and CSA/CUL)
Nominal voltage / current / conductor sizes
UL: [V] / [A] / AWG
CSA/CUL: [V] / [A] / AWG
2
3
) Further colors are available on request.
) Further types of insulation on request.
Phoenix Contact page 6 of 9
5.2 / 58.8 / 2.2
39.3 / 46.8
–
8/3
III / I
PVC / PE 3)
0.5-1.0 // 1.5
0.5-1.0 // 1.5
0.25 - 0.34
24-16
0.25-1.5
PA
V0
applied for
applied for
Fast Connection
Ground Terminal Block
QTC 1,5-TWIN-PE
(IEC)
[mm2]
rigid
solid
flexible
stranded
AWG
Connection data
0.25-1.51) 0.25-1.51) 24-161)
1) See below under "Technical data".
Current carrying capacity of the mounting rails, see CLIPLINE catalog.
Technical data
Type
Order No.
Pcs.
Pkt.
QTC 1,5-TWIN-PE
32 05 06 4
50
D-QTC 1,5-TWIN
32 05 19 0
50
DS-QTC 1,5
32 05 20 0
50
FBS 2-5
FBS 3-5
FBS 4-5
FBS 5-5
FBS 10-5
FBS 20-5
30 30 16 1
30 30 17 4
30 30 18 7
30 30 19 0
30 30 21 3
30 30 22 6
50
50
50
50
10
10
(4) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP-QTC TWIN
32 06 23 8
50
(5) Test adapter, for 4 mm ∅ test plug PS
and 4 mm ∅ safety test plugs,
making contact in the bridge shaft
PAI 4
30 30 92 5
10
MPS-IH RD
02 01 67 6
10
PS-5
30 30 98 3
10
STP 5-2-ZB
30 37 64 3
100
SZF 1 - 0,6 x 3,5
12 04 51 7
10
Terminal block,
for mounting on 3
green-yellow
(1) End cover
terminal width 5.2
gray
(2) End cover segment, serves for covering
multi-conductor terminal blocks when
gray
two-conductor terminal blocks are aligned
(3) Plug-in bridge, for
cross-connections in the
terminal center,
color: red
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
(6) 2.3 mm ∅ test plug 2), consisting of
metal part and red insulating sleeve
(7) Modular test plug, can be labeled with ZBF 5
(8) Double marker carrier, snaps into
QTC fast connection terminal blocks,
can be labeled with ZB 5 and ZBF 5
gray
(9) Screwdriver, for
actuating the fast connection
(10) Zack strip, flat, for center and external labeling
white
ZBF 5:UNBEDRUCKT
08 08 64 2
10
(11) Zack strip, 10-section, for center labeling
white
ZB 5:UNBEDRUCKT
10 50 00 4
10
Dimensions
Width / length / end cover width
[mm]
Height (NS 35/7,5 / NS 35/15)
[mm]
Technical data in accordance with IEC/ DIN VDE
Maximum load current / cross section
[A] / [mm2]
Rated surge voltage / contamination class
[kV] / –
Surge voltage category / insulation material group
–/–
Connection capacity
Core insulation
Single/multi/fine strand H05V-U/R/K // H07V-U/R/K
[mm2]
Halogen-free
H05Z-U/R/K // H07Z-U/R/K
[mm2]
Fine strand/superfine strand (litz wires Ø ≥ 0.1 mm)
[mm2]
(litz wires Ø ≥ 0.19 mm)
AWG
Circuitry
min. 100x same cross section
[mm2]
Insulating material
Inflammability class in acc. with UL 94
Approval data (UL and CSA/CUL)
Nominal voltage / current / conductor sizes
UL: [V] / [A] / AWG
CSA/CUL: [V] / [A] / AWG
2
3
) Further colors are available on request.
) Further types of insulation on request.
Phoenix Contact page 7 of 9
5.2 / 76.4 / 2.2
39.3 / 46.8
–
8/3
III / I
PVC / PE 3)
0.5-1.0 // 1.5
0.5-1.0 // 1.5
0.25 - 0.34
24-16
0.25-1.5
PA
V0
applied for
applied for
Fast Connection
Ground Terminal Block
QTC 1,5-QUATTRO-PE
(IEC)
[mm2]
rigid
solid
flexible
stranded
AWG
Connection data
0.25-1.51) 0.25-1.51) 24-161)
1) See below under "Technical data".
Current carrying capacity of the mounting rails, see CLIPLINE catalog.
Technical data
Type
Order No.
Pcs.
Pkt.
QTC 1,5-QUATTRO-PE
32 05 09 3
50
D-QTC 1,5-QUATTRO
32 05 17 4
50
DS-QTC 1,5
32 05 20 0
50
FBS 2-5
FBS 3-5
FBS 4-5
FBS 5-5
FBS 10-5
FBS 20-5
30 30 16 1
30 30 17 4
30 30 18 7
30 30 19 0
30 30 21 3
30 30 22 6
50
50
50
50
10
10
(4) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP-QTC QUATTRO
32 06 22 5
50
(5) Test adapter, for 4 mm ∅ test plug PS
and 4 mm ∅ safety test plugs,
making contact in the bridge shaft
PAI 4
30 30 92 5
10
MPS-IH RD
02 01 67 6
10
PS-5
30 30 98 3
10
STP 5-2-ZB
30 37 64 3
100
SZF 1 - 0,6 x 3,5
12 04 51 7
10
Terminal block,
for mounting on 3
green-yellow
(1) End cover
terminal width 5.2
gray
(2) End cover segment, serves for covering
multi-conductor terminal blocks when
gray
two-conductor terminal blocks are aligned
(3) Plug-in bridge, for
cross-connections in the
terminal center,
color: red
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
(6) 2.3 mm ∅ test plug 2), consisting of
metal part and red insulating sleeve
(7) Modular test plug, can be labeled with ZBF 5
(8) Double marker carrier, snaps into
QTC fast connection terminal blocks,
can be labeled with ZB 5 and ZBF 5
gray
(9) Screwdriver, for
actuating the fast connection
(10) Zack strip, flat, for center and external labeling
white
ZBF 5:UNBEDRUCKT
08 08 64 2
10
(11) Zack strip, 10-section, for center labeling
white
ZB 5:UNBEDRUCKT
10 50 00 4
10
Dimensions
Width / length / end cover width
[mm]
Height (NS 35/7,5 / NS 35/15)
[mm]
Technical data in accordance with IEC/ DIN VDE
Maximum load current / cross section
[A] / [mm2]
Rated surge voltage / contamination class
[kV] / –
Surge voltage category / insulation material group
–/–
Connection capacity
Core insulation
Single/multi/fine strand H05V-U/R/K // H07V-U/R/K
[mm2]
Halogen-free
H05Z-U/R/K // H07Z-U/R/K
[mm2]
Fine strand/superfine strand (litz wires Ø ≥ 0.1 mm)
[mm2]
(litz wires Ø ≥ 0.19 mm)
AWG
Circuitry
min. 100x same cross section
[mm2]
Insulating material
Inflammability class in acc. with UL 94
Approval data (UL and CSA/CUL)
Nominal voltage / current / conductor sizes
UL: [V] / [A] / AWG
CSA/CUL: [V] / [A] / AWG
2
3
) Further colors are available on request.
) Further types of insulation on request.
Phoenix Contact page 8 of 9
5.2 / 94.0 / 2.2
39.3 / 46.8
–
8/3
III / I
PVC / PE 3)
0.5-1.0 // 1.5
0.5-1.0 // 1.5
0.25 - 0.34
24-16
0.25-1.5
PA
V0
applied for
applied for
Fast Connection
Ground Terminal Block
QTTCB 1,5-PE
(IEC)
[mm2]
rigid
solid
flexible
stranded
AWG
Connection data
0.25-1.51) 0.25-1.51) 24-161)
1) See below under "Technical data".
Current carrying capacity of the mounting rails, see CLIPLINE catalog.
Type
Order No.
Pcs.
Pkt.
QTTCB 1,5-PE
32 05 13 2
50
D-QTTCB 1,5
32 05 18 7
50
FBS 2-5
FBS 3-5
FBS 4-5
FBS 5-5
FBS 10-5
FBS 20-5
30 30 16 1
30 30 17 4
30 30 18 7
30 30 19 0
30 30 21 3
30 30 22 6
50
50
50
50
10
10
(3) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP-QTTCB
32 06 23 8
50
(4) Test adapter, for 4 mm ∅ test plug PS
and 4 mm ∅ safety test plugs,
making contact in the bridge shaft
PAI 4
30 30 92 5
10
MPS-IH RD
02 01 67 6
10
PS-5
30 30 98 3
10
STP 5-2-ZB
30 37 64 3
100
SZF 1 - 0,6 x 3,5
12 04 51 7
10
Terminal block,
for mounting on 3
green-yellow
(1) End cover
(2) Plug-in bridge, for
cross-connections in the
terminal center,
color: red
terminal width 5.2
gray
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
(5) 2.3 mm ∅ test plug 2), consisting of
metal part and red insulating sleeve
(6) Modular test plug, can be labeled with ZBF 5
(7) Double marker carrier, snaps into
QTC fast connection terminal blocks,
can be labeled with ZB 5 and ZBF 5
gray
(8) Screwdriver, for
actuating the fast connection
(9) Zack strip, flat, for center and external labeling
white
ZBF 5:UNBEDRUCKT
08 08 64 2
10
(10) Zack strip, 10-section, for center labeling
white
ZB 5:UNBEDRUCKT
10 50 00 4
10
Dimensions
Width / length / end cover width
[mm]
Height (NS 35/7,5 / NS 35/15)
[mm]
Technical data in accordance with IEC/ DIN VDE
Maximum load current / cross section
[A] / [mm2]
Rated surge voltage / contamination class
[kV] / –
Surge voltage category / insulation material group
–/–
Connection capacity
Core insulation
Single/multi/fine strand H05V-U/R/K // H07V-U/R/K
[mm2]
Halogen-free
H05Z-U/R/K // H07Z-U/R/K
[mm2]
Fine strand/superfine strand (litz wires Ø ≥ 0.1 mm)
[mm2]
(litz wires Ø ≥ 0.19 mm)
AWG
Circuitry
min. 100x same cross section
[mm2]
Insulating material
Inflammability class in acc. with UL 94
Approval data (UL and CSA/CUL)
Nominal voltage / current / conductor sizes
UL: [V] / [A] / AWG
CSA/CUL: [V] / [A] / AWG
2
3
) Further colors are available on request.
) Further types of insulation on request.
Phoenix Contact page 9 of 9
5.2 / 99.6 / 2.2
49.9 / 47.5
–
6/3
III / I
PVC / PE 3)
0.5-1.0 // 1.5
0.5-1.0 // 1.5
0.25 - 0.34
24-16
0.25-1.5
PA
V0
applied for
applied for
TNR 5152445-00/15.03.2003 Phoenix Contact 2003
Technical data
