https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Disconnect terminal block, nom. voltage: 400 V, nominal current: 17.5 A, connection method: Quick connection,
cross section: 0.25 mm² - 1.5 mm², AWG: 24 - 16, length: 76.4 mm, width: 5.2 mm, color: gray, mounting: NS
35/7,5, NS 35/15
Your advantages
Tested for railway applications
Triple bridge shaft enables individual potential distribution and supply
Disconnect terminal block with universal disconnect zone for accommodating isolating plugs, feed-through connectors, component plugs, and fuse
plugs
The insulated P-FIX (1) feed-through connector enables the installation of a feed-through terminal of the same shape
The P-DI (2) isolating plug can be used in all disconnect terminal blocks. Following disconnection, the P-DI can be "parked" back to front in the basic
terminal block.
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4017918932473
Weight per Piece (excluding packing)
10.800 g
Custom tariff number
85369010
Country of origin
China
Technical data
General
Note
Current and voltage are determined by the plug used.
Number of levels
1
Number of connections
2
Nominal cross section
1.5 mm²
08/28/2019 Page 1 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Technical data
General
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Area of application
Railway industry
Machine building
Plant engineering
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
17.5 A
Maximum load current
17.5 A (with 1.5 mm² conductor cross section)
Nominal voltage UN
400 V
Open side panel
Yes
Shock protection test specification
IEC 60529:1989-11 + AMD 1:1999-11 + AMD 2:2013-08
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
7.3 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
1.5 mm² / 0.4 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.2 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
1.5 mm²
Tractive force setpoint
40 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
1N
08/28/2019 Page 2 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Technical data
General
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 6,4 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
1.5 mm²
Short-time current
0.18 kA
Result of aging test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
5.2 mm
Length
76.4 mm
Height NS 35/7,5
39.3 mm
Height NS 35/15
46.8 mm
Connection data
Conductor cross section solid min.
0.25 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible min.
0.25 mm²
Conductor cross section flexible max.
1.5 mm²
08/28/2019 Page 3 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Technical data
Connection data
Conductor cross section AWG min.
24
Conductor cross section AWG max.
16
Connection method
Quick connection
Max. wire diameter incl. insulation
3 mm
Material wire insulation
PVC / PE
Structure of individual litz in acc. with VDE 0295 / smallest wire diameter
VDE 0295 Cl.1-5
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Classifications
eCl@ss
eCl@ss 4.1
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141126
eCl@ss 8.0
27141126
eCl@ss 9.0
27141126
ETIM
ETIM 2.0
EC000902
ETIM 3.0
EC000902
ETIM 4.0
EC000902
ETIM 5.0
EC000902
ETIM 6.0
EC000902
ETIM 7.0
EC000902
08/28/2019 Page 4 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Classifications
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
CSA / BV / LR / KR / NK / ABS / UL Recognized / cUL Recognized / EAC / cULus Recognized
Ex Approvals
Approval details
CSA
http://www.csagroup.org/services-industries/product-listing/
B
C
D
Nominal voltage UN
300 V
300 V
600 V
Nominal current IN
10 A
10 A
5A
mm²/AWG/kcmil
24-16
24-16
24-16
BV
13631
http://www.veristar.com/portal/veristarinfo/generalinfo/
approved/approvedProducts/equipmentAndMaterials
13637/B0 BV
LR
http://www.lr.org/en
05/20042
KR
http://www.krs.co.kr/eng/main/main.aspx
NAJ25486-EL003
08/28/2019 Page 5 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Approvals
NK
ABS
UL Recognized
http://www.classnk.or.jp/hp/en/
09 ME 139
http://www.eagle.org/eagleExternalPortalWEB/
16-HG1589079-PDA
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
B
C
D
Nominal voltage UN
300 V
300 V
600 V
Nominal current IN
10 A
10 A
5A
mm²/AWG/kcmil
24-16
24-16
24-16
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
B
C
D
Nominal voltage UN
300 V
300 V
600 V
Nominal current IN
10 A
10 A
5A
mm²/AWG/kcmil
24-16
24-16
24-16
EAC
EAC-Zulassung
cULus Recognized
Accessories
Accessories
Component plug terminal block
08/28/2019 Page 6 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Component connector - P-CO XL - 3036797
Component connector, for installing components that can be individually selected up to a diameter of 10 mm and power
dissipation of up to 1 W, nominal current: 10 A, length: 41.2 mm, width: 12.3 mm, height: 37.5 mm, number of positions:
1, color: gray
Component connector - P-CO XL SKN - 3036798
Component connector, specifically for holding the SKN 2,5 diode, nominal current: 10 A, length: 41.2 mm, width: 12.3
mm, height: 37.5 mm, number of positions: 1, color: gray
Component connector - P-CO 2-5 R47K - 3032447
Component connector, with 47 kOhm resistor for open circuit monitoring, pitch: 5.2 mm, length: 8.9 mm, width: 4.1 mm,
height: 34.8 mm, number of positions: 2, color: black
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
08/28/2019 Page 7 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
08/28/2019 Page 8 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
End block
End clamp - E/AL-NS 35 - 1201662
End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm,
color: aluminum
End cover
End cover - D-QTC 1,5-TWIN - 3205190
End cover, length: 76.4 mm, width: 2.2 mm, height: 39.3 mm, color: gray
Cover segment - DS-QTC 1,5 - 3205200
Cover segment, length: 94 mm, height: 39.3 mm, color: gray
08/28/2019 Page 9 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
08/28/2019 Page 10 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-5 - 3030161
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-5 - 3030174
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 14.2 mm, number of positions: 3, color: red
Plug-in bridge - FBS 4-5 - 3030187
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 19.4 mm, number of positions: 4, color: red
08/28/2019 Page 11 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Plug-in bridge - FBS 5-5 - 3030190
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 24.6 mm, number of positions: 5, color: red
Plug-in bridge - FBS 10-5 - 3030213
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 50.6 mm, number of positions: 10, color: red
Plug-in bridge - FBS 20-5 - 3030226
Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: red
Plug-in bridge - FBSR 2-5 - 3033702
Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: red
Plug-in bridge - FBSR 3-5 - 3001591
Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: red
08/28/2019 Page 12 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Plug-in bridge - FBSR 4-5 - 3001592
Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: red
Plug-in bridge - FBSR 5-5 - 3001593
Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: red
Plug-in bridge - FBSR 10-5 - 3033710
Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: red
Plug-in bridge - FBS 2-5 BU - 3036877
Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 3-5 BU - 3036880
Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: blue
08/28/2019 Page 13 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Plug-in bridge - FBS 4-5 BU - 3036893
Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-5 BU - 3036903
Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 10-5 BU - 3036916
Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: blue
Plug-in bridge - FBS 20-5 BU - 3036929
Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: blue
Plug-in bridge - FBS 50-5 BU - 3032114
Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: blue
Knife
08/28/2019 Page 14 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Isolating plugs - P-DI - 3036783
Isolating plugs, length: 10.8 mm, width: 3.5 mm, height: 23.1 mm, color: orange
Isolating plugs - P-DI GY - 3047390
Isolating plugs, length: 10.8 mm, width: 3.5 mm, height: 23.1 mm, color: gray
Isolating plugs - P-DI GN - 1071062
Isolating plugs, length: 10.8 mm, width: 3.5 mm, height: 23.1 mm, color: green
Labeled terminal marker
Zack marker strip - ZB 5 CUS - 0824962
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017
Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500,
mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
08/28/2019 Page 15 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020
Zack marker strip, white, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15
x 10.5 mm
Zack marker strip - ZB 5,LGS:L1-N,PE - 1050415
Zack marker strip, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall
marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Marker for terminal blocks - UC-TM 5 CUS - 0824581
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm
Marker for terminal blocks - UCT-TM 5 CUS - 0829595
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm
08/28/2019 Page 16 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Zack Marker strip, flat - ZBF 5 CUS - 0825025
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ...
500, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ...
100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
08/28/2019 Page 17 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Marker for terminal blocks - UC-TMF 5 CUS - 0824638
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 5 CUS - 0829658
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm
Marker carriers
Marker carriers - STP 5-2/S - 0800970
Double marker carrier, snaps onto the double-level spring-cage terminal block ZFKK 1,5, with MSTBV or ICV pick-off
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Partition plate
08/28/2019 Page 18 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Partition plate - ATP-QTC TWIN - 3206212
Partition plate, length: 84.4 mm, width: 2 mm, height: 46 mm, color: gray
Spacer plate - DP PS-5 - 3036725
Spacer plate, length: 22.4 mm, width: 5.2 mm, height: 29 mm, number of positions: 1, color: red
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm
Marker for terminal blocks - UC-TM 5 - 0818108
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 5.2 mm, lettering field size: 10.5 x 4.6 mm
08/28/2019 Page 19 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Marker for terminal blocks - UCT-TM 5 - 0828734
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size:
4.6 x 10.5 mm
Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.1 x 5.2 mm
Marker for terminal blocks - UC-TMF 5 - 0818153
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 5.2 mm, lettering field size: 4.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 5 - 0828744
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size:
4.4 x 4.7 mm
Test plug terminal block
Test plugs - PS-4/E - 3036709
Test plugs, color: red
08/28/2019 Page 20 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Test plugs - PS-5 - 3030983
Test plugs, color: red
Test plugs - PS-5/2,3MM RD - 3038723
Test plugs, color: red
Test socket
Test adapter - PAI-4-FIX-5/6 BU - 3035975
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 OG - 3035974
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
08/28/2019 Page 21 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Test adapter - PAI-4-FIX-5/6 YE - 3035977
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 RD - 3035976
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GN - 3035978
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BK - 3035980
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GY - 3035982
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
08/28/2019 Page 22 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Test adapter - PAI-4-FIX-5/6 VT - 3035979
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BN - 3035981
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 WH - 3035983
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Additional products
Isolating plugs - P-DI - 3036783
Isolating plugs, length: 10.8 mm, width: 3.5 mm, height: 23.1 mm, color: orange
Feed-through connector - P-FIX - 3038956
Feed-through connector, length: 10.5 mm, width: 4 mm, color: gray
08/28/2019 Page 23 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Component connector - P-CO - 3036796
Component connector, for installing components that can be individually selected, nominal current: 6 A, pitch: 5.2 mm,
length: 24.2 mm, width: 5.1 mm, height: 33.3 mm, number of positions: 1, color: gray
Component connector - P-CO 1N4007/R-L - 3032457
Component connector, with diode1N4007, length: 24.2 mm, width: 5.2 mm, height: 33.3 mm, number of positions: 1,
color: gray
Component connector - P-CO 1N4007/L-R - 3032460
Component connector, with diode1N4007, length: 24.2 mm, width: 5.2 mm, height: 33.3 mm, number of positions: 1,
color: gray
Fuse plug - P-FU 5X20-5 - 3209235
Fuse plug, fuse type: Glass / ceramics / ..., connection method: Plug connection, nominal current: 6.3 A, nom. voltage:
400 V, width: 6.2 mm, fuse type: G / 5 x 20, mounting type: Plug-in mounting, color: black
Fuse plug - P-FU 5X20 LED 24-5 - 3209248
Fuse plug, fuse type: Glass / ceramics / ..., connection method: Plug connection, nominal current: 6.3 A, width: 6.2 mm,
fuse type: G / 5 x 20, mounting type: Plug-in mounting, color: black
08/28/2019 Page 24 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Fuse plug - P-FU 5X20 LED 60-5 - 3209251
Fuse plug, fuse type: Glass / ceramics / ..., connection method: Plug connection, nominal current: 6.3 A, width: 6.2 mm,
fuse type: G / 5 x 20, mounting type: Plug-in mounting, color: black
Fuse plug - P-FU 5X20 LED 250-5 - 3209264
Fuse plug, fuse type: Glass / ceramics / ..., connection method: Plug connection, nominal current: 6.3 A, width: 6.2 mm,
fuse type: G / 5 x 20, mounting type: Plug-in mounting, color: black
Fuse plug - P-FU 6,3X32 - 3046498
Fuse plug, fuse type: Glass / ceramics / ..., connection method: Plug connection, nominal current: 10 A, nom. voltage:
630 V, width: 8.2 mm, fuse type: G / 6,3 x 32, mounting type: Plug-in mounting, color: black
Fuse plug - P-FU 6,3X32 LED 24 - 3046508
Fuse plug, fuse type: Glass / ceramics / ..., connection method: Plug connection, nominal current: 10 A, width: 8.2 mm,
fuse type: G / 6,3 x 32, mounting type: Plug-in mounting, color: black
Fuse plug - P-FU 6,3X32 LED 60 - 3046511
Fuse plug, fuse type: Glass / ceramics / ..., connection method: Plug connection, nominal current: 10 A, width: 8.2 mm,
fuse type: G / 6,3 x 32, mounting type: Plug-in mounting, color: black
08/28/2019 Page 25 / 26
https://www.phoenixcontact.com/us/products/3205145
Disconnect terminal block - QTC 1,5-TG - 3205145
Accessories
Fuse plug - P-FU 6,3X32 LA 250 - 3046524
Fuse plug, fuse type: Glass / ceramics / ..., connection method: Plug connection, nominal current: 10 A, width: 8.2 mm,
fuse type: G / 6,3 x 32, mounting type: Plug-in mounting, color: black
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
08/28/2019 Page 26 / 26
