3208694

https://www.phoenixcontact.com/us/products/3208694 Connector - FC 4-PCB/8 - 3208694 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB header, 8-pos. Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4046356663366 Weight per Piece (excluding packing) 36.000 g Custom tariff number 85366990 Country of origin Poland Technical data General Number of positions 8 Number of levels 1 Potentials 8 Nominal cross section 2.5 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 4 kV Degree of pollution 3 Overvoltage category III 08/28/2019   Page 1 / 8 https://www.phoenixcontact.com/us/products/3208694 Connector - FC 4-PCB/8 - 3208694 Technical data General Insulating material group I Maximum power dissipation for nominal condition 0.77 W Ambient temperature (operation) -50 °C ... 100 °C Ambient temperature (assembly) -40 °C ... 100 °C Designation Level 1 Maximum load current 15 A Nominal current IN 15 A Nominal voltage UN 320 V Open side panel No Insertion/withdrawal cycles mechanical 100 Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Shock test result Test passed Test specification, shock test following DIN EN 60255-21-1:1996-05 Shock form Half-sine Acceleration 30g Shock duration 11 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 65.7 mm 08/28/2019   Page 2 / 8 https://www.phoenixcontact.com/us/products/3208694 Connector - FC 4-PCB/8 - 3208694 Technical data Dimensions Length 29.1 mm Height 34.3 mm Connection data Connection method Spade connection/solder connection Connection in acc. with standard IEC 61984 Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 14 Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 2.5 mm² Min. AWG conductor cross section, flexible 20 Max. AWG conductor cross section, flexible 14 Standards and Regulations Connection in acc. with standard IEC 61984 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Classifications eCl@ss eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141133 eCl@ss 8.0 27141133 eCl@ss 9.0 27141133 ETIM ETIM 3.0 EC000886 ETIM 4.0 EC000886 08/28/2019   Page 3 / 8 https://www.phoenixcontact.com/us/products/3208694 Connector - FC 4-PCB/8 - 3208694 Classifications ETIM ETIM 5.0 EC000886 ETIM 6.0 EC000886 ETIM 7.0 EC000886 UNSPSC UNSPSC 6.01 30211827 UNSPSC 7.0901 39121424 UNSPSC 11 39121424 UNSPSC 12.01 39121410 UNSPSC 13.2 39121425 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC      EAC-Zulassung Accessories Accessories Coding element Coding star - PC - 3040588 Coding star, length: 3 mm, width: 3 mm, height: 6 mm, color: red     08/28/2019   Page 4 / 8 https://www.phoenixcontact.com/us/products/3208694 Connector - FC 4-PCB/8 - 3208694 Accessories Coding star - PC - 3040588 Coding star, length: 3 mm, width: 3 mm, height: 6 mm, color: red     Connector Connector - C-SCFI 1,5/6,3X0,8 - 3240052 Slip-on sleeve, red, 0.5 ... 1.5 mm², 6.3 x 0.8     Connector - C-SCFI 2,5/6,3X0,8 - 3240055 Slip-on sleeve, blue, 1.5 ... 2.5 mm², 6.3 x 0.8     Connector - C-SCFI 6/6,3X0,8 - 3240056 Slip-on sleeve, yellow, 4 ... 6 mm², 6.3 x 0.8     Connector - C-SCFFI 1,5/6,3X0,8 - 3240538 Slip-on sleeve, fully isolated, red, 0.5 ... 1.5 mm², for plug 6.3 x 0.8 mm     08/28/2019   Page 5 / 8 https://www.phoenixcontact.com/us/products/3208694 Connector - FC 4-PCB/8 - 3208694 Accessories Connector - C-SCFFI 2,5/6,3X0,8 - 3240547 Slip-on sleeve, fully isolated, blue, 1.5 ... 2.5 mm², for plug 6.3 x 0.8 mm     Connector - C-SCFFI 6/6,3X0,8 - 3240541 Slip-on sleeve, fully insulated, yellow, 4 ... 6 mm², for 6.3 x 0.8 mm plugs     Labeled terminal marker Zack Marker strip, flat - ZBF 6 CUS - 0825027 Zack Marker strip, flat, Strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm     Marker for terminal blocks - UC-TMF 6 CUS - 0824646 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 6 CUS - 0829665 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.4 x 4.7 mm     08/28/2019   Page 6 / 8 https://www.phoenixcontact.com/us/products/3208694 Connector - FC 4-PCB/8 - 3208694 Accessories Zack Marker strip, flat - ZBF 6,LGS:FORTL.ZAHLEN - 0808749 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm     Zack Marker strip, flat - ZBF 6,QR:FORTL.ZAHLEN - 0808765 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm     Zack Marker strip, flat - ZBF 6,LGS:GERADE ZAHLEN - 0810834 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ... 100, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm     Zack Marker strip, flat - ZBF 6,LGS:UNGERADE ZAHLEN - 0810876 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm     Terminal marking Zack Marker strip, flat - ZBF 6:UNBEDRUCKT - 0808710 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm     08/28/2019   Page 7 / 8 https://www.phoenixcontact.com/us/products/3208694 Connector - FC 4-PCB/8 - 3208694 Accessories Marker for terminal blocks - UC-TMF 6 - 0818140 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 6 - 0828746 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.4 x 4.7 mm     Additional products Plug - UP 4-4CT - 3208720 Plug for four current transformers, each with leading transformer short circuit     Plug - UP 4-4VT - 3208721 Plug for four voltage transducers     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 08/28/2019   Page 8 / 8