3208736

https://www.phoenixcontact.com/us/products/3208736 Connector - FC 4-PCB/10 - 3208736 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB header, 10-pos. The figure shows a version of the article Key Commercial Data Packing unit 1 STK Minimum order quantity 10 STK Custom tariff number 85366990 Country of origin Poland Technical data Environmental Product Compliance China RoHS No hazardous substances above threshold values General Number of positions 10 Number of levels 1 Number of connections 10 Potentials 10 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 4 kV Degree of pollution 3 Overvoltage category III 09/08/2016   Page 1 / 9 https://www.phoenixcontact.com/us/products/3208736 Connector - FC 4-PCB/10 - 3208736 Technical data General Insulating material group I Ambient temperature (operation) -50 °C ... 100 °C (see derating curve) Ambient temperature (assembly) -40 °C ... 100 °C Maximum load current 30 A Nominal current IN 15 A Nominal voltage UN 320 V Open side panel No Insertion/withdrawal cycles mechanical 100 Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise following DIN EN 60255-21-1:1996-05 Test frequency 10 - 150 Hz Acceleration 1g (84.2 - 150 Hz) Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test following DIN EN 60255-21-1:1996-05 Shock form Half-sine Acceleration 30g Shock duration 11 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 09/08/2016   Page 2 / 9 https://www.phoenixcontact.com/us/products/3208736 Connector - FC 4-PCB/10 - 3208736 Technical data General Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 97.5 mm Length 29.1 mm Height 34.3 mm Pitch 6.1 mm Connection data Connection method Spade connection/solder connection Connection in acc. with standard IEC 61984 Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 14 Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 2.5 mm² Min. AWG conductor cross section, flexible 20 Max. AWG conductor cross section, flexible 14 Standards and Regulations Connection in acc. with standard IEC 61984 Flammability rating according to UL 94 V0 Drawings Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141111 eCl@ss 4.1 27141111 eCl@ss 5.0 27141133 eCl@ss 5.1 27141133 eCl@ss 6.0 27141133 eCl@ss 7.0 27141133 eCl@ss 8.0 27141120 09/08/2016   Page 3 / 9 https://www.phoenixcontact.com/us/products/3208736 Connector - FC 4-PCB/10 - 3208736 Classifications eCl@ss eCl@ss 9.0 27141120 ETIM ETIM 3.0 EC000886 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211827 UNSPSC 7.0901 39121424 UNSPSC 11 39121424 UNSPSC 12.01 39121410 UNSPSC 13.2 39121424 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC   EAC-Zulassung Accessories Accessories Coding element Coding star - PC - 3040588 Coding star, Length: 3 mm, Width: 3 mm, Height: 6 mm, Color: red     09/08/2016   Page 4 / 9 https://www.phoenixcontact.com/us/products/3208736 Connector - FC 4-PCB/10 - 3208736 Accessories Coding star - PC - 3040588 Coding star, Length: 3 mm, Width: 3 mm, Height: 6 mm, Color: red     Connector Connector - C-SCFI 1,5/6,3X0,8 - 3240052 Slip-on sleeve, red, 0.5 - 1.5 mm², 6.3 x 0.8     Connector - C-SCFI 2,5/6,3X0,8 - 3240055 Slip-on sleeve, blue, 1.5 - 2.5 mm², 6.3 x 0.8     Connector - C-SCFI 6/6,3X0,8 - 3240056 Slip-on sleeve, yellow, 4 - 6 mm², 6.3 x 0.8     Connector - C-SCFFI 1,5/6,3X0,8 - 3240538 Slip-on sleeve, fully isolated, red, 0.5 - 1.5 mm², for plug 6.3 x 0.8 mm     09/08/2016   Page 5 / 9 https://www.phoenixcontact.com/us/products/3208736 Connector - FC 4-PCB/10 - 3208736 Accessories Connector - C-SCFFI 2,5/6,3X0,8 - 3240547 Slip-on sleeve, fully isolated, blue, 1.5 - 2.5 mm², for plug 6.3 x 0.8 mm     Connector - C-SCFFI 6/6,3X0,8 - 3240541 Slip-on sleeve, fully insulated, yellow, 4 - 6 mm², for 6.3 x 0.8 mm plugs     Labeled terminal marker Zack Marker strip, flat - ZBF 6 CUS - 0825027 Zack Marker strip, flat, Strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Marker for terminal blocks - UC-TMF 6 CUS - 0824646 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 6 CUS - 0829665 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.4 x 4.7 mm     09/08/2016   Page 6 / 9 https://www.phoenixcontact.com/us/products/3208736 Connector - FC 4-PCB/10 - 3208736 Accessories Zack Marker strip, flat - ZBF 6,LGS:FORTL.ZAHLEN - 0808749 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Zack Marker strip, flat - ZBF 6,QR:FORTL.ZAHLEN - 0808765 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Zack Marker strip, flat - ZBF 6,LGS:GERADE ZAHLEN - 0810834 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 2 - 20, 22 - 40, etc. up to 82 - 100, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Zack Marker strip, flat - ZBF 6,LGS:UNGERADE ZAHLEN - 0810876 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Terminal marking Zack Marker strip, flat - ZBF 6:UNBEDRUCKT - 0808710 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     09/08/2016   Page 7 / 9 https://www.phoenixcontact.com/us/products/3208736 Connector - FC 4-PCB/10 - 3208736 Accessories Marker for terminal blocks - UC-TMF 6 - 0818140 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 6 - 0828746 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.4 x 4.7 mm     Additional products Short-circuit connector - BP 4-5CT - 3208733 Plug for five current transformers, each with leading transformer short circuit     Plug - BP 4-5VT - 3208734 Plug for five voltage transducers     Plug - BP 4-1CT/4VT - 3208735 Plug for four voltage transducers and one current transformer     09/08/2016   Page 8 / 9 https://www.phoenixcontact.com/us/products/3208736 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 09/08/2016   Page 9 / 9