https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, same shape as disconnect terminal block, nom. voltage: 400 V, nominal current:
17.5 A, connection method: Push-in connection, number of connections: 4, cross section: 0.14 mm² - 1.5 mm²,
AWG: 26 - 14, width: 3.5 mm, height: 30.5 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
Your advantages
The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring
of conductors with ferrules or solid conductors
The compact design and front connection enable wiring in a confined space
In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4046356905725
Weight per Piece (excluding packing)
6.000 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
1
Number of connections
4
Potentials
1
Nominal cross section
1.5 mm²
Color
gray
11/08/2019 Page 1 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Technical data
General
Insulating material
PA
Flammability rating according to UL 94
V0
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
0.56 W
Designation
Level 1 above 1 below 1
Maximum load current
17.5 A
Nominal current IN
17.5 A
Nominal voltage UN
400 V
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
7.3 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
1.5 mm² / 0.4 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.14 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
1.5 mm²
Tractive force setpoint
40 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
1N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
11/08/2019 Page 2 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Technical data
General
Conductor cross section short circuit testing
1.5 mm²
Short-time current
0.18 kA
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s ) /Hz
Acceleration
3.12 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
11/08/2019 Page 3 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Technical data
Dimensions
Width
3.5 mm
End cover width
0.8 mm
Length
76.9 mm
Height
30.5 mm
Height NS 35/7,5
32 mm
Height NS 35/15
39.5 mm
Connection data
Connection
1 level
Connection method
Push-in connection
Stripping length
8 mm ... 10 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
14
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
1.5 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm² Using the AI-S 1-8 TQ ferrule, Order No. 1200293, is recommended
Internal cylindrical gage
A1 / B1
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
11/08/2019 Page 4 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Circuit diagram
Classifications
eCl@ss
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 4.0
EC000897
ETIM 5.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
DNV GL / CSA / LR / UL Recognized / cUL Recognized / EAC / cULus Recognized
Ex Approvals
Approval details
DNV GL
https://approvalfinder.dnvgl.com/
1481515 HH
11/08/2019 Page 5 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Approvals
CSA
http://www.csagroup.org/services-industries/product-listing/
B
C
Nominal voltage UN
300 V
300 V
Nominal current IN
10 A
10 A
mm²/AWG/kcmil
26-16
26-16
13631
LR
http://www.lr.org/en
16/20026
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
B
C
Nominal voltage UN
300 V
300 V
Nominal current IN
10 A
10 A
mm²/AWG/kcmil
26-16
26-16
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
300 V
300 V
Nominal current IN
10 A
10 A
mm²/AWG/kcmil
26-16
26-16
EAC
cULus Recognized
FILE E 60425
RU CDE.AI30.B.01102
Accessories
Accessories
11/08/2019 Page 6 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Crimping tool
Crimping pliers - CRIMPFOX CENTRUS 6S - 1213144
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² … 6 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX CENTRUS 10S - 1213154
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX CENTRUS 6H - 1213146
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² … 6 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX CENTRUS 10H - 1213156
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX 10S - 1212045
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.14 mm² ... 10 mm², unlockable pressure lock, lateral entry
11/08/2019 Page 7 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Crimping pliers - CRIMPFOX 6H - 1212046
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry
Crimping pliers - CRIMPFOX 2,5-M - 1212719
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 2.5 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6-M - 1212720
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6 - 1212034
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6T - 1212037
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 6 mm², lateral entry, trapezoidal crimp
11/08/2019 Page 8 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Crimping pliers - CRIMPFOX 6T-F - 1212038
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 6 mm², front entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6S-F - 1212043
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.5 mm² ... 6 mm², front entry, square crimp
Crimping pliers - CRIMPFOX-M - 1212072
Basic pliers, for accommodating dies for a wide range of type of contacts
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
11/08/2019 Page 9 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
11/08/2019 Page 10 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
11/08/2019 Page 11 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
11/08/2019 Page 12 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
Documentation
Mounting material - PT-IL - 3208090
Operating decal for the push-in Technology
End block
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
11/08/2019 Page 13 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End cover
End cover - D-PT 1,5/S-QUATTRO-MT-0,8 - 3210333
End cover, length: 76.9 mm, width: 0.8 mm, height: 24.3 mm, color: gray
End cover - D-PT 1,5/S-QUATTRO-MT-0,8 OG - 3210334
End cover, length: 76.9 mm, width: 0.8 mm, height: 24.3 mm, color: orange
11/08/2019 Page 14 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
11/08/2019 Page 15 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-3,5 - 3213014
Plug-in bridge, pitch: 3.5 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-3,5 - 3213027
Plug-in bridge, pitch: 3.5 mm, number of positions: 3, color: red
Plug-in bridge - FBS 4-3,5 - 3213030
Plug-in bridge, pitch: 3.5 mm, number of positions: 4, color: red
11/08/2019 Page 16 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Plug-in bridge - FBS 5-3,5 - 3213043
Plug-in bridge, pitch: 3.5 mm, number of positions: 5, color: red
Plug-in bridge - FBS 10-3,5 - 3213056
Plug-in bridge, pitch: 3.5 mm, number of positions: 10, color: red
Plug-in bridge - FBS 20-3,5 - 3213069
Plug-in bridge, pitch: 3.5 mm, number of positions: 20, color: red
Plug-in bridge - FBS 2-3,5 BU - 3213086
Plug-in bridge, pitch: 3.5 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 3-3,5 BU - 3213099
Plug-in bridge, pitch: 3.5 mm, number of positions: 3, color: blue
11/08/2019 Page 17 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Plug-in bridge - FBS 4-3,5 BU - 3213109
Plug-in bridge, pitch: 3.5 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-3,5 BU - 3213112
Plug-in bridge, pitch: 3.5 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 10-3,5 BU - 3213125
Plug-in bridge, pitch: 3.5 mm, number of positions: 10, color: blue
Plug-in bridge - FBS 20-3,5 BU - 3213138
Plug-in bridge, pitch: 3.5 mm, number of positions: 20, color: blue
Plug-in bridge - FBS 2-3,5 GY - 3213153
Plug-in bridge, pitch: 3.5 mm, number of positions: 2, color: gray
11/08/2019 Page 18 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Plug-in bridge - FBS 3-3,5 GY - 3213167
Plug-in bridge, pitch: 3.5 mm, number of positions: 3, color: gray
Plug-in bridge - FBS 4-3,5 GY - 3213180
Plug-in bridge, pitch: 3.5 mm, number of positions: 4, color: gray
Plug-in bridge - FBS 5-3,5 GY - 3213183
Plug-in bridge, pitch: 3.5 mm, number of positions: 5, color: gray
Plug-in bridge - FBS 10-3,5 GY - 3213196
Plug-in bridge, pitch: 3.5 mm, number of positions: 10, color: gray
Plug-in bridge - FBS 20-3,5 GY - 3213206
Plug-in bridge, pitch: 3.5 mm, number of positions: 20, color: gray
Labeled terminal marker
11/08/2019 Page 19 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Zack marker strip - ZB 3,5 CUS - 0829415
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 3,5,LGS:FORTL.ZAHLEN - 0801404
Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100,
mounting type: snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 10.5 mm, Number
of individual labels: 10
Zack marker strip - ZB 3,5,QR:FORT.ZAHLEN - 0801405
Zack marker strip, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100,
mounting type: snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 10.5 mm, Number
of individual labels: 10
Marker for terminal blocks - UCT-TM 3,5 CUS - 0829581
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 2.95 x 10.5 mm, Number of individual
labels: 102
Zack Marker strip, flat - ZBF 3,5 CUS - 0829394
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 5.2 mm, Number of individual labels: 10
11/08/2019 Page 20 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Zack Marker strip, flat - ZBF 3,5,LGS:FORTL.ZAHLEN - 0801406
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 5.15 x 3.5 mm,
Number of individual labels: 10
Zack Marker strip, flat - ZBF 3,5,QR:FORTL.ZAHLEN - 0801407
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 5.15 x 3.5 mm,
Number of individual labels: 10
Marker for terminal blocks - UCT-TMF 3,5 CUS - 0829644
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 2.7 x 4.7 mm, Number of individual
labels: 108
Marker carriers
Group marker label for terminal marking - GBS-ZB/26X6 - 0809298
Group marking label, snaps onto terminal center for screw, spring-cage and quick connection terminal blocks, labeled
with ESL 26x6 mm or EST 25x6 mm, in the foot part with Zack marker strip, length: 29 mm
Partition plate
Partition plate - ATP-ST QUATTRO - 3030815
Partition plate, length: 90.9 mm, width: 2 mm, height: 45 mm, color: gray
11/08/2019 Page 21 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Spacer plate - DP PS-3,5 - 3031011
Spacer plate, length: 15.9 mm, width: 3.5 mm, height: 33.5 mm, number of positions: 1, color: red
Planning and marking software
Software - CLIP-PROJECT ADVANCED - 5146040
Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.
Software - CLIP-PROJECT PROFESSIONAL - 5146053
Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and
labels for identifying terminal blocks, conductors and cables, and devices.
Reducing bridge
Reducing bridge - RB ST (2,5/4)-1,5/S - 3214356
Reducing bridge, pitch: 6.7 mm, length: 22.7 mm, width: 10.4 mm, number of positions: 2, color: red
11/08/2019 Page 22 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Reducing bridge - RB ST 6-1,5/S - 3213250
Reducing bridge, pitch: 8 mm, length: 29.9 mm, width: 12.9 mm, number of positions: 2, color: red
Screwdriver tools
Screwdriver - SZF 0-0,4X2,5 - 1204504
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2component grip, with non-slip grip
Actuation tool - ST-BW 0 - 1200135
Actuation tool, for all 1.5 mm² spring cages from PT 1,5/S and FT 1,5/S
Terminal marking
Zack marker strip - ZB 3,5:UNBEDRUCKT - 0829414
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 10.5 mm, Number of individual labels:
10
Marker for terminal blocks - UCT-TM 3,5 - 0829484
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size:
2.95 x 10.5 mm, Number of individual labels: 102
11/08/2019 Page 23 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Zack Marker strip, flat - ZBF 3,5:UNBEDRUCKT - 0829392
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 5.2 mm, Number of individual
labels: 10
Marker for terminal blocks - UCT-TMF 3,5 - 0829486
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size:
2.7 x 4.7 mm, Number of individual labels: 108
Marker for terminal blocks - TMT (EX9,5)R - 0828295
Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK
ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: snap
into universal marker groove, snap into tall marker groove, for terminal block width: 50000 mm, lettering field size: 9.5 x
50000 mm, Number of individual labels: 1
Marker for terminal blocks - US-TM 100 - 0829255
Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into universal marker
groove, lettering field size: 104 x 9.8 mm, Number of individual labels: 13
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
11/08/2019 Page 24 / 25
https://www.phoenixcontact.com/us/products/3210328
Feed-through terminal block - PT 1,5/S-QUATTRO-MTD - 3210328
Accessories
Test plugs - PS-3,5 - 3031010
Test plugs, color: red
Test plugs - PS-3,5/E - 3031012
Test plugs, color: red
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
11/08/2019 Page 25 / 25
