https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Knife disconnect terminal block, nom. voltage: 400 V, nominal current: 9 A, connection method: Push-in
connection, cross section: 0.14 mm² - 1.5 mm², AWG: 26 - 14, length: 86 mm, width: 3.5 mm, color: gray,
mounting: NS 35/7,5, NS 35/15, nom. voltage: 400 V
Why buy this product
The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring
of conductors with ferrules or solid conductors
The compact design and front connection enable wiring in a confined space
Convenient separation of circuits, thanks to lever-type disconnect knife
Clear identification of the disconnect point, thanks to color highlighting
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
50 STK
GTIN
GTIN
4046356942003
Weight per Piece (excluding packing)
9.230 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
2
Number of connections
4
Potentials
2
Nominal cross section
1.5 mm²
04/03/2018 Page 1 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Technical data
General
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Maximum load current
9A
Nominal current IN
9A
Nominal voltage UN
400 V
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
7.3 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
1.5 mm² / 0.4 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.14 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
1.5 mm²
Tractive force setpoint
40 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
1N
Result of voltage-drop test
Test passed
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
04/03/2018 Page 2 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Technical data
General
Conductor cross section short circuit testing
1.5 mm²
Short-time current
0.18 kA
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s ) /Hz
Acceleration
3.12 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
04/03/2018 Page 3 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Technical data
Dimensions
Width
3.5 mm
End cover width
0.8 mm
Length
86 mm
Height
41.1 mm
Height NS 35/7,5
42.6 mm
Height NS 35/15
50.1 mm
Connection data
Connection method
Push-in connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
14
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
1.5 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm² Using the AI-S 1-8 TQ ferrule, Order No. 1200293, is recommended
Stripping length
8 mm ... 10 mm
Internal cylindrical gage
A1 / B1
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
04/03/2018 Page 4 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Circuit diagram
Classifications
eCl@ss
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 8.0
27141126
eCl@ss 9.0
27141126
ETIM
ETIM 4.0
EC000902
ETIM 5.0
EC000902
ETIM 6.0
EC000902
UNSPSC
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / CSA / LR / DNV GL / cULus Recognized
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
mm²/AWG/kcmil
26-16
26-16
Nominal current IN
10 A
10 A
Nominal voltage UN
300 V
300 V
FILE E 60425
04/03/2018 Page 5 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Approvals
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
mm²/AWG/kcmil
26-16
26-16
Nominal current IN
10 A
10 A
Nominal voltage UN
300 V
300 V
CSA
http://www.csagroup.org/services-industries/product-listing/
B
C
mm²/AWG/kcmil
26-16
26-16
Nominal current IN
10 A
10 A
Nominal voltage UN
300 V
300 V
LR
13631
http://www.lr.org/en
16/20026
http://exchange.dnv.com/tari/
1481515 HH
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
DNV GL
cULus Recognized
FILE E 60425
Accessories
Accessories
Crimping tool
Crimping pliers - CRIMPFOX CENTRUS 6S - 1213144
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² to 6 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
04/03/2018 Page 6 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Accessories
Crimping pliers - CRIMPFOX CENTRUS 10S - 1213154
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX CENTRUS 6H - 1213146
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² to 6 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX CENTRUS 10H - 1213156
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX 10S - 1212045
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.14 mm² ... 10 mm², unlockable pressure lock, lateral entry
Crimping pliers - CRIMPFOX 6H - 1212046
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry
04/03/2018 Page 7 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Accessories
Crimping pliers - CRIMPFOX 2,5-M - 1212719
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 2.5 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6-M - 1212720
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6 - 1212034
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6T - 1212037
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 6 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6T-F - 1212038
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 6 mm², front entry, trapezoidal crimp
04/03/2018 Page 8 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Accessories
Crimping pliers - CRIMPFOX 6S-F - 1212043
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.5 mm² ... 6 mm², front entry, square crimp
Crimping pliers - CRIMPFOX-M - 1212072
Basic pliers, for accommodating dies for a wide range of type of contacts
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
04/03/2018 Page 9 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Accessories
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
04/03/2018 Page 10 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Accessories
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
04/03/2018 Page 11 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Accessories
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
04/03/2018 Page 12 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Accessories
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, in acc. with EN 60715: 2001,
material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver
Documentation
Mounting material - PT-IL - 3208090
Operating decal for the push-in Technology
End block
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
04/03/2018 Page 13 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Accessories
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End cover
End cover - D-PTT 1,5/S-2MT-0,8 - 3210353
End cover, length: 86 mm, width: 0.8 mm, height: 34.9 mm, color: gray
End cover - D-PTT 1,5/S-2MT-0,8 OG - 3210354
End cover, length: 86 mm, width: 0.8 mm, height: 34.9 mm, color: orange
Insulating sleeve
04/03/2018 Page 14 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Accessories
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
04/03/2018 Page 15 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Accessories
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Labeled terminal marker
Zack Marker strip, flat - ZBF 3,5 CUS - 0829394
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 5.2 mm
Zack Marker strip, flat - ZBF 3,5,LGS:FORTL.ZAHLEN - 0801406
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100,
mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 5.15 x 3.5 mm
Zack Marker strip, flat - ZBF 3,5,QR:FORTL.ZAHLEN - 0801407
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100,
mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 5.15 x 3.5 mm
04/03/2018 Page 16 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Accessories
Marker for terminal blocks - UCT-TMF 3,5 CUS - 0829644
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 2.7 x 4.7 mm
Marker carriers
Marker carriers - STP 5-2 - 0800967
Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4 can
be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5
Marker carriers - STP 5-2/S - 0800970
Double marker carrier, snaps onto the double-level spring-cage terminal block ZFKK 1,5, with MSTBV or ICV pick-off
Partition plate
Partition plate - ATP-STTB 4 - 3030747
Partition plate, length: 88.7 mm, width: 2 mm, height: 53 mm, color: gray
Planning and marking software
04/03/2018 Page 17 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Accessories
Software - CLIP-PROJECT ADVANCED - 5146040
Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.
Software - CLIP-PROJECT PROFESSIONAL - 5146053
Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and
labels for identifying terminal blocks, conductors and cables, and devices.
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Actuation tool - ST-BW 0 - 1200135
Actuation tool, for all 1.5 mm² spring cages from PT 1,5/S and FT 1,5/S
Terminal marking
Zack Marker strip, flat - ZBF 3,5:UNBEDRUCKT - 0829392
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 5.2 mm
04/03/2018 Page 18 / 19
https://www.phoenixcontact.com/us/products/3210341
Knife disconnect terminal block - PTT 1,5/S-L/MT - 3210341
Accessories
Marker for terminal blocks - UCT-TMF 3,5 - 0829486
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into flat marker groove, for
terminal block width: 3.5 mm, lettering field size: 2.7 x 4.7 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
04/03/2018 Page 19 / 19
