3210549

https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Installation ground terminal block, Push-in connection, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15 Your advantages  Double function shafts on all levels Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356701341 Weight per Piece (excluding packing) 13.420 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 3 Number of connections 5 Nominal cross section 2.5 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 4 kV Degree of pollution 3 06/14/2020   Page 1 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Technical data General Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 0.77 W (the value is multiplied when connecting multiple levels) Ambient temperature (operation) -60 °C ... 85 °C Ambient temperature (storage/transport) -25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 70 °C Nominal current IN 22 A (with a 2.5 mm² conductor cross section) Maximum load current 30 A (with 4 mm² conductor cross section and 3-pos. terminal block) Nominal voltage UN 400 V (phase conductor/phase conductor) 250 V (phase conductor/PE) Nominal current IN (upper level) 16 A (with a 2.5 mm² conductor cross section) Maximum load current (upper level) 16 A (with 4 mm² conductor cross section) Nominal voltage UN 250 V Open side panel Yes Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 7.3 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Checking the mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 2.5 mm² / 0.7 kg 4 mm² / 0.9 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 2.5 mm² Tractive force setpoint 50 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N 06/14/2020   Page 2 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Technical data General Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 2.5 mm² Short-time current 0.3 kA Conductor cross section short circuit testing 2.5 mm² Short-time current 0.18 kA Result of aging test Test passed Ageing test for screwless modular terminal block temperature cycles 192 Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec.; UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg 06/14/2020   Page 3 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Technical data General Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 5.2 mm Length 118 mm Height NS 35/7,5 42.3 mm Height NS 35/15 49.8 mm Connection data Note Please observe the current carrying capacity of the DIN rails. Connection method Push-in connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 0.5 mm² Stripping length 8 mm ... 10 mm Internal cylindrical gage A3 Connection method Push-in connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² 06/14/2020   Page 4 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Technical data Connection data Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 0.5 mm² Stripping length 8 mm ... 10 mm Standards and Regulations Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27141125 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 06/14/2020   Page 5 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Classifications eCl@ss eCl@ss 6.0 27141100 eCl@ss 7.0 27141125 eCl@ss 8.0 27141125 eCl@ss 9.0 27141125 ETIM ETIM 3.0 EC001329 ETIM 4.0 EC000901 ETIM 5.0 EC001329 ETIM 6.0 EC001329 ETIM 7.0 EC001329 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals EAC / EAC Ex Approvals Approval details EAC      RU CDE.AI30.B.01102 06/14/2020   Page 6 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Approvals  EAC     RU CDE.BL08.B.00644 Accessories Accessories Bridge Wire bridge - FBSW 2-5/250MM - 3030172 Wire bridge, length: 250 mm, width: 5.1 mm, number of positions: 1, color: red/black     Wire bridge - FBSW 2-5/60MM - 3030170 Wire bridge, length: 60 mm, width: 5.1 mm, number of positions: 1, color: red/black     Wire bridge - FBSW 2-5/110MM - 3030171 Wire bridge, length: 110 mm, width: 5.1 mm, number of positions: 1, color: red/black     Component plug terminal block Component connector - P-CO 2-5 R47K - 3032447 Component connector, with 47 kOhm resistor for open circuit monitoring, pitch: 5.2 mm, length: 8.9 mm, width: 4.1 mm, height: 34.8 mm, number of positions: 2, color: black     06/14/2020   Page 7 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Cover profile Cover profile - AP-NLS N - 1013634 Cover profile, length: 300 mm, color: transparent     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     06/14/2020   Page 8 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     06/14/2020   Page 9 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     06/14/2020   Page 10 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     Documentation 06/14/2020   Page 11 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Mounting material - PT-IL - 3208090 Operating decal for the push-in Technology     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End cover End cover - D-PTB 2,5/3 - 3210552 End cover, length: 118.7 mm, width: 2.2 mm, height: 40.6 mm, color: gray     06/14/2020   Page 12 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Filler plug Filler plugs - CEC 2,5 - 3062757 Cover for conductor shaft, 10-pos., for spring cage terminal blocks (ST) and terminal blocks with push-in technology (PT) with a width of 5.2 mm     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     06/14/2020   Page 13 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Insulating sleeve - ISH 2,5/0,2 - 3002843 Insulating sleeve, color: white     06/14/2020   Page 14 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Insulating sleeve - ISH 2,5/0,5 - 3002856 Insulating sleeve, color: gray     Insulating sleeve - ISH 2,5/1,0 - 3002869 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-5 - 3030161 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-5 - 3030174 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 14.2 mm, number of positions: 3, color: red     Plug-in bridge - FBS 4-5 - 3030187 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 19.4 mm, number of positions: 4, color: red     06/14/2020   Page 15 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Plug-in bridge - FBS 5-5 - 3030190 Plug-in bridge, pitch: 5.2 mm, length: 23 mm, width: 24.6 mm, number of positions: 5, color: red     Plug-in bridge - FBS 10-5 - 3030213 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 50.6 mm, number of positions: 10, color: red     Plug-in bridge - FBS 20-5 - 3030226 Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: red     Plug-in bridge - FBS 50-5 - 3038930 Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: red     Plug-in bridge - FBSR 2-5 - 3033702 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: red     06/14/2020   Page 16 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Plug-in bridge - FBSR 3-5 - 3001591 Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: red     Plug-in bridge - FBSR 4-5 - 3001592 Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: red     Plug-in bridge - FBSR 5-5 - 3001593 Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: red     Plug-in bridge - FBSR 10-5 - 3033710 Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: red     Plug-in bridge - FBS 2-5 BU - 3036877 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue     06/14/2020   Page 17 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Plug-in bridge - FBS 3-5 BU - 3036880 Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: blue     Plug-in bridge - FBS 4-5 BU - 3036893 Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-5 BU - 3036903 Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: blue     Plug-in bridge - FBS 10-5 BU - 3036916 Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: blue     Plug-in bridge - FBS 20-5 BU - 3036929 Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: blue     06/14/2020   Page 18 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Plug-in bridge - FBS 50-5 BU - 3032114 Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: blue     Labeled terminal marker Zack marker strip - ZB 5 CUS - 0824962 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017 Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020 Zack marker strip, white, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10     06/14/2020   Page 19 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Zack marker strip - ZB 5,LGS:L1-N,PE - 1050415 Zack marker strip, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 5 CUS - 0824581 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96     Marker for terminal blocks - UCT-TM 5 CUS - 0829595 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72     Zack Marker strip, flat - ZBF 5 CUS - 0825025 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     06/14/2020   Page 20 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ... 100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TMF 5 CUS - 0824638 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 5.1 mm, Number of individual labels: 96     Marker for terminal blocks - UCT-TMF 5 CUS - 0829658 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm, Number of individual labels: 72     Marker carriers 06/14/2020   Page 21 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Marker carriers - CARRIER-TM 300 - 0828282 Marker carriers, gray, unlabeled, mounting type: snap into flat marker groove, lettering field size: 10.5 x 300 mm     Neutral conductor rail Neutral busbar - NLS-CU 3/10 SN 1000MM - 0402174 Neutral busbar, width: 10 mm, height: 3 mm, DIN VDE 0611-4: 1991-02, material: Copper, tin-plated, length: 1000 mm, color: silver     Partition plate Spacer plate - DP PS-5 - 3036725 Spacer plate, length: 22.4 mm, width: 5.2 mm, height: 29 mm, number of positions: 1, color: red     Planning and marking software Software - CLIP-PROJECT ADVANCED - 5146040 Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.     06/14/2020   Page 22 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Software - CLIP-PROJECT PROFESSIONAL - 5146053 Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and labels for identifying terminal blocks, conductors and cables, and devices.     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Actuation tool - ST-BW - 1207608 Actuation tool, for all 2.5 mm² - 4.0 mm² spring-cages     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 5 - 0818108 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96     06/14/2020   Page 23 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72     Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.1 x 5.2 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TMF 5 - 0818153 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 5.1 mm, Number of individual labels: 96     Marker for terminal blocks - UCT-TMF 5 - 0828744 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm, Number of individual labels: 72     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray     06/14/2020   Page 24 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Test plugs - PS-5 - 3030983 Test plugs, Modular test plug, color: red     Test plugs - PS-5/2,3MM RD - 3038723 Test plugs, color: red     Test socket Test adapter - PAI-4-N GY - 3032871 4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch     Warning label printed Warning label - WS PT 2,5 - 1029026 Warning label, yellow/black, labeled: Lightning flash, mounting type: plug in, for terminal block width: 5.2 mm     Warning label - WS-DIO PT 2,5 - 1029037 Warning label, yellow/black, labeled: Diode, mounting type: plug in, for terminal block width: 5.2 mm     06/14/2020   Page 25 / 26 https://www.phoenixcontact.com/us/products/3210549 Installation ground terminal block - PTB 2,5-PE/L/MT - 3210549 Accessories Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 06/14/2020   Page 26 / 26