https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, with widened marking grooves for TMT... Materials, Connection method: Push-in
connection, Cross section: 0.14 mm² - 2.5 mm², AWG: 26 - 12, Width: 5.2 mm, Height: 35.3 mm, Color: blue,
Mounting type: NS 35/7,5, NS 35/15
The figure shows a similar product
Why buy this product
The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring
of conductors with ferrules or solid conductors
The compact design and front connection enable wiring in a confined space
In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
50 STK
Weight per Piece (excluding packing)
7.200 g
Custom tariff number
85369010
Country of origin
China
Technical data
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
General
Number of levels
1
Number of connections
4
Potentials
1
Nominal cross section
2.5 mm²
Color
blue
09/30/2016 Page 1 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Technical data
General
Insulating material
PA
Flammability rating according to UL 94
V0
Area of application
Machine building
Plant engineering
Process industry
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum load current
22 A (at a conductor cross section of 2.5 mm²; it must not be exceeded by
the total current.)
24 A (rigid when four 2.5 mm² cables are connected)
Nominal current IN
17.5 A
Nominal voltage UN
500 V
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
7.3 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
1.5 mm² / 0.4 kg
2.5 mm² / 0.7 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.14 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
1.5 mm²
Tractive force setpoint
40 N
Conductor cross section tensile test
2.5 mm²
Tractive force setpoint
50 N
Result of tight fit on support
Test passed
09/30/2016 Page 2 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Technical data
General
Tight fit on carrier
NS 35
Setpoint
1N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
1.5 mm²
Short-time current
0.18 kA
Conductor cross section short circuit testing
2.5 mm²
Short-time current
0.3 kA
Result of aging test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s ) /Hz
Acceleration
3.12 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Dimensions
Width
5.2 mm
End cover width
2.2 mm
Length
48.6 mm
09/30/2016 Page 3 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Technical data
Dimensions
Height
35.3 mm
Height NS 35/7,5
36.7 mm
Height NS 35/15
44.2 mm
Connection data
Connection method
Push-in connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
1.5 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
16
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
12
Internal cylindrical gage
A2
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Flammability rating according to UL 94
V0
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141121
eCl@ss 4.1
27141121
eCl@ss 5.0
27141120
09/30/2016 Page 4 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Classifications
eCl@ss
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
09/30/2016 Page 5 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
09/30/2016 Page 6 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
09/30/2016 Page 7 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
09/30/2016 Page 8 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
Documentation
Mounting material - PT-IL - 3208090
Operating decal for the push-in Technology
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
09/30/2016 Page 9 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End cover
End cover - D-ST 2,5 - 3030417
End cover, Length: 48.6 mm, Width: 2.2 mm, Height: 29.1 mm, Color: gray
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, Color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, Color: red
09/30/2016 Page 10 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, Color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, Color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, Color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, Color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, Color: black
09/30/2016 Page 11 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
Insulating sleeve - ISH 2,5/0,2 - 3002843
Insulating sleeve, Color: white
Insulating sleeve - ISH 2,5/0,5 - 3002856
Insulating sleeve, Color: gray
Insulating sleeve - ISH 2,5/1,0 - 3002869
Insulating sleeve, Color: black
Jumper
Plug-in bridge - FBS 2-5 - 3030161
Plug-in bridge, Pitch: 5.2 mm, Length: 22.7 mm, Width: 9 mm, Number of positions: 2, Color: red
Plug-in bridge - FBS 3-5 - 3030174
Plug-in bridge, Pitch: 5.2 mm, Length: 22.7 mm, Width: 14.2 mm, Number of positions: 3, Color: red
09/30/2016 Page 12 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
Plug-in bridge - FBS 4-5 - 3030187
Plug-in bridge, Pitch: 5.2 mm, Length: 22.7 mm, Width: 19.4 mm, Number of positions: 4, Color: red
Plug-in bridge - FBS 5-5 - 3030190
Plug-in bridge, Pitch: 5.2 mm, Length: 22.7 mm, Width: 24.6 mm, Number of positions: 5, Color: red
Plug-in bridge - FBS 10-5 - 3030213
Plug-in bridge, Pitch: 5.2 mm, Length: 22.7 mm, Width: 50.6 mm, Number of positions: 10, Color: red
Plug-in bridge - FBS 20-5 - 3030226
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 20, Color: red
Plug-in bridge - FBS 50-5 - 3038930
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 50, Color: red
09/30/2016 Page 13 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
Plug-in bridge - FBSR 2-5 - 3033702
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 2, Color: red
Plug-in bridge - FBSR 3-5 - 3001591
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 3, Color: red
Plug-in bridge - FBSR 4-5 - 3001592
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 4, Color: red
Plug-in bridge - FBSR 5-5 - 3001593
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 5, Color: red
Plug-in bridge - FBSR 10-5 - 3033710
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 10, Color: red
Partition plate
09/30/2016 Page 14 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
Partition plate - ATP-ST 4 - 3030721
Partition plate, Length: 59.8 mm, Width: 2 mm, Height: 39 mm, Color: gray
Spacer plate - DP PS-5 - 3036725
Spacer plate, Length: 22.4 mm, Width: 5.2 mm, Height: 29 mm, Number of positions: 1, Color: red
Planning and marking software
Software - CLIP-PROJECT ADVANCED - 5146040
Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.
Software - CLIP-PROJECT PROFESSIONAL - 5146053
Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and
labels for identifying terminal blocks, conductors and cables, and devices.
Reducing bridge
Reducing bridge - RB ST (2,5/4)-1,5 - 3038943
Reducing bridge, Pitch: 7.1 mm, Length: 22.7 mm, Width: 10.4 mm, Number of positions: 2, Color: red
09/30/2016 Page 15 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
Screwdriver tools
Screwdriver - SZF 0-0,4X2,5 - 1204504
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2component grip, with non-slip grip
Screwdriver - ST-BW 0 - 1200135
Actuation tool, for all 1.5 mm² spring cages from PT 1,5/S and FT 1,5/S
Terminal marking
Marker for terminal blocks - TMT (EX9,5)R - 0828295
Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL
X1, THERMOMARK X, Mounting type: Snap into universal marker groove, Snap into tall marker groove, Lettering field:
9.5 x 50000 mm
Marker for terminal blocks - US-TM 100 - 0829255
Marker for terminal blocks, Card, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD,
Mounting type: Snap into universal marker groove, Lettering field: 104 x 9.8 mm
Test plug terminal block
09/30/2016 Page 16 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
Test plugs - MPS-MT - 0201744
Test plugs, Color: silver
Test plugs - PS-5 - 3030983
Test plugs, Color: red
Test plugs - PS-5/2,3MM RD - 3038723
Test plugs, Color: red
Test socket
Test adapter - PAI-4-FIX-5/6 BU - 3035975
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 OG - 3035974
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
09/30/2016 Page 17 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
Test adapter - PAI-4-FIX-5/6 YE - 3035977
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 RD - 3035976
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GN - 3035978
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BK - 3035980
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GY - 3035982
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
09/30/2016 Page 18 / 19
https://www.phoenixcontact.com/us/products/3211029
Feed-through terminal block - PT 2,5/S-QUATTRO BU CUS - 3211029
Accessories
Test adapter - PAI-4-FIX-5/6 VT - 3035979
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BN - 3035981
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 WH - 3035983
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
09/30/2016 Page 19 / 19
