https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, nom. voltage: 1000 V, nominal current: 57 A, connection method: Push-in
connection, number of connections: 2, cross section: 0.5 mm² - 16 mm², AWG: 20 - 6, width: 10.2 mm, height:
49.5 mm, color: orange, mounting type: NS 35/7,5, NS 35/15
Your advantages
The compact design and front connection enable wiring in a confined space
The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring
of conductors with ferrules or solid conductors
In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection
Tested for railway applications
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4046356897846
Weight per Piece (excluding packing)
28.000 g
Custom tariff number
85369010
Country of origin
China
Technical data
General
Number of levels
1
Number of connections
2
Potentials
1
Nominal cross section
10 mm²
09/04/2020 Page 1 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Technical data
General
Color
orange
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
1.82 W
Maximum load current
70 A (with a 16 mm² conductor cross section, rigid)
Nominal current IN
57 A
Nominal voltage UN
1000 V
Open side panel
Yes
Ambient temperature (operation)
-60 °C ... 85 °C
Ambient temperature (storage/transport)
-25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
10 mm² / 2 kg
16 mm² / 2.9 kg
Tensile test result
Test passed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
5N
Result of voltage-drop test
Test passed
Result of temperature-rise test
Test passed
09/04/2020 Page 2 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Technical data
General
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short circuit stability result
Test passed
Conductor cross section short circuit testing
10 mm²
Short-time current
1.2 kA
Conductor cross section short circuit testing
16 mm²
Short-time current
1.92 kA
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s ) /Hz
Acceleration
0,8 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
2 2
Dimensions
Width
10.2 mm
End cover width
2.2 mm
Length
67.7 mm
Height
49.5 mm
Height NS 35/7,5
50.5 mm
Height NS 35/15
58 mm
Connection data
Connection
1 level
Connection method
Push-in connection
Stripping length
18 mm
09/04/2020 Page 3 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Technical data
Connection data
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
16 mm²
Conductor cross section AWG min.
20
Conductor cross section AWG max.
6
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
16 mm²
Min. AWG conductor cross section, flexible
20
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules,
with plastic sleeve, minimum
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules,
with plastic sleeve, maximum
4 mm²
Connection cross sections directly pluggable
1 mm² 16 mm²
Conductor cross section solid min.
1 mm²
Conductor cross section solid max.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Internal cylindrical gage
A6
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
09/04/2020 Page 4 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Circuit diagram
Classifications
eCl@ss
eCl@ss 10.0.1
27141120
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Approvals
Approvals
09/04/2020 Page 5 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Approvals
Approvals
CSA / PRS / BV / NK / ABS / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Zeichengenehmigung / EAC / EAC / RS / DNV GL / LR /
EAC / cULus Recognized
Ex Approvals
IECEx / ATEX / UL Recognized / cUL Recognized / EAC Ex / cULus Recognized
Approval details
CSA
http://www.csagroup.org/services-industries/product-listing/
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
55 A
55 A
mm²/AWG/kcmil
20-6
20-6
13631
PRS
http://www.prs.pl/
TE/2107/880590/16
BV
http://www.veristar.com/portal/veristarinfo/generalinfo/
approved/approvedProducts/equipmentAndMaterials
37796/B0 BV
NK
http://www.classnk.or.jp/hp/en/
14ME0913
http://www.eagle.org/eagleExternalPortalWEB/
16-HG1591536-PDA
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
ABS
UL Recognized
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
60 A
60 A
09/04/2020 Page 6 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Approvals
B
C
mm²/AWG/kcmil
20-6
20-6
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
60 A
60 A
mm²/AWG/kcmil
20-6
20-6
IECEE CB Scheme
http://www.iecee.org/
Nominal voltage UN
1000 V
Nominal current IN
57 A
VDE Zeichengenehmigung
http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx
Nominal voltage UN
1000 V
Nominal current IN
57 A
mm²/AWG/kcmil
0.5-10
FILE E 60425
DE1-60910
40038590
EAC
EAC-Zulassung
EAC
RU CDE.AI30.B.01102
RS
http://www.rs-head.spb.ru/en/index.php
17.00013.272
09/04/2020 Page 7 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Approvals
DNV GL
https://approvalfinder.dnvgl.com/
TAE000010T
LR
http://www.lr.org/en
12/20038 (E3)
EAC
RU CDE.BL08.B.00644
cULus Recognized
Accessories
Accessories
Crimping tool
Crimping pliers - CRIMPFOX CENTRUS 6S - 1213144
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² … 6 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX CENTRUS 10S - 1213154
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
09/04/2020 Page 8 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Crimping pliers - CRIMPFOX CENTRUS 6H - 1213146
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² … 6 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX CENTRUS 10H - 1213156
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX 10S - 1212045
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.14 mm² ... 10 mm², unlockable pressure lock, lateral entry
Crimping pliers - CRIMPFOX 6H - 1212046
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry
Crimping pliers - CRIMPFOX 2,5-M - 1212719
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 2.5 mm², lateral entry, trapezoidal crimp
09/04/2020 Page 9 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Crimping pliers - CRIMPFOX 6-M - 1212720
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6 - 1212034
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6T - 1212037
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 6 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6T-F - 1212038
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.25 mm² ... 6 mm², front entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6S-F - 1212043
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.5 mm² ... 6 mm², front entry, square crimp
09/04/2020 Page 10 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Crimping pliers - CRIMPFOX 10 - 1212721
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 4 mm² ... 10 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 25R - 1212039
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 10 mm² ... 25 mm², lateral entry, WM crimp
Crimping pliers - CRIMPFOX-M - 1212072
Basic pliers, for accommodating dies for a wide range of type of contacts
Device circuit breakers
Electronic device circuit breaker - PTCB E1 24DC/1-8A NO - 2908262
Single-channel electronic circuit breaker for protecting 24 V DC loads against overload and short circuit. Simple potential
distribution using components from the CLIPLINE complete terminal block system. With electronic locking of the set
nominal currents. For installation on DIN rails.
Electronic device circuit breaker - PTCB E1 24DC/1-3A NO - 2909909
Single-channel electronic circuit breaker for protecting 24 V DC loads against overload and short circuit. Simple potential
distribution using components from the CLIPLINE complete terminal block system. With electronic locking of the set
nominal currents. For installation on DIN rails.
09/04/2020 Page 11 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Electronic device circuit breaker - PTCB E1 24DC/2A NO - 2909903
Single-channel electronic circuit breaker for protecting 24 V DC loads against overload and short circuit. Simple potential
distribution using components from the CLIPLINE complete terminal block system. With fixed nominal current. For
installation on DIN rails.
Electronic device circuit breaker - PTCB E1 24DC/1-4A NO - 2908261
Single-channel electronic circuit breaker for protecting 24 V DC loads against overload and short circuit. Simple potential
distribution using components from the CLIPLINE complete terminal block system. With electronic locking of the set
nominal currents. For installation on DIN rails.
Electronic device circuit breaker - PTCB E1 24DC/3A NO - 2909904
Single-channel electronic circuit breaker for protecting 24 V DC loads against overload and short circuit. Simple potential
distribution using components from the CLIPLINE complete terminal block system. With fixed nominal current. For
installation on DIN rails.
Electronic device circuit breaker - PTCB E1 24DC/4A NO - 2909906
Single-channel electronic circuit breaker for protecting 24 V DC loads against overload and short circuit. Simple potential
distribution using components from the CLIPLINE complete terminal block system. With fixed nominal current. For
installation on DIN rails.
Electronic device circuit breaker - PTCB E1 24DC/6A NO - 2909908
Single-channel electronic circuit breaker for protecting 24 V DC loads against overload and short circuit. Simple potential
distribution using components from the CLIPLINE complete terminal block system. With fixed nominal current. For
installation on DIN rails.
09/04/2020 Page 12 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Electronic device circuit breaker - PTCB E1 24DC/1A NO - 2909902
Single-channel electronic circuit breaker for protecting 24 V DC loads against overload and short circuit. Simple potential
distribution using components from the CLIPLINE complete terminal block system. With fixed nominal current. For
installation on DIN rails.
Electronic device circuit breaker - PTCB E1 24DC/8A NO - 2909910
Single-channel electronic circuit breaker for protecting 24 V DC loads against overload and short circuit. Simple potential
distribution using components from the CLIPLINE complete terminal block system. With fixed nominal current. For
installation on DIN rails.
Electronic device circuit breaker - PTCB E1 24DC/1-8A SI-R - 1135752
Single-channel, electronic fuse for the protection of 24 V loads. Simple potential distribution using terminal blocks from
the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
Electronic device circuit breaker - PTCB E1 24DC/2A SI-R - 1135749
Single-channel, electronic fuse for the protection of 24 V loads. Simple potential distribution using terminal blocks from
the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
Electronic device circuit breaker - PTCB E1 24DC/1-4A SI-R - 1135753
Single-channel, electronic fuse for the protection of 24 V loads. Simple potential distribution using terminal blocks from
the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
09/04/2020 Page 13 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Electronic device circuit breaker - PTCB E1 24DC/4A SI-R - 1135745
Single-channel, electronic fuse for the protection of 24 V loads. Simple potential distribution using terminal blocks from
the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
Electronic device circuit breaker - PTCB E1 24DC/6A SI-R - 1135740
Single-channel, electronic fuse for the protection of 24 V loads. Simple potential distribution using terminal blocks from
the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
Electronic device circuit breaker - PTCB E1 24DC/1A SI-R - 1135751
Single-channel, electronic fuse for the protection of 24 V loads. Simple potential distribution using terminal blocks from
the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
Electronic device circuit breaker - PTCB E1 24DC/8A SI-R - 1135734
Single-channel, electronic fuse for the protection of 24 V loads. Simple potential distribution using terminal blocks from
the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
09/04/2020 Page 14 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
09/04/2020 Page 15 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
09/04/2020 Page 16 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
09/04/2020 Page 17 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
Documentation
Mounting material - PT-IL - 3208090
Operating decal for the push-in Technology
End block
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
09/04/2020 Page 18 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End cover
End cover - D-PT 10 - 3212057
End cover, length: 67.7 mm, width: 2.2 mm, height: 42.6 mm, color: gray
09/04/2020 Page 19 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
09/04/2020 Page 20 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-10 - 3005947
Plug-in bridge, pitch: 10.2 mm, number of positions: 2, color: red
Plug-in bridge - FBS 5-10 - 3005948
Plug-in bridge, pitch: 10.2 mm, number of positions: 5, color: red
Plug-in bridge - FBS 5-10 BU - 1040620
Plug-in bridge, pitch: 10.2 mm, number of positions: 5, color: blue
09/04/2020 Page 21 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Labeled terminal marker
Zack marker strip - ZB 10 CUS - 0824941
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels:
10
Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2
mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB10,QR:FORTL.ZAHLEN - 1053027
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm,
lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - ZB10,LGS:L1-N,PE - 1053412
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - ZB10,LGS:U-N - 1053438
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: U, V, W, N, GND,
U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm, Number of individual labels: 10
09/04/2020 Page 22 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Marker for terminal blocks - UC-TM 10 CUS - 0824605
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual
labels: 48
Marker for terminal blocks - UCT-TM 10 CUS - 0829623
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual
labels: 36
Zack Marker strip, flat - ZBF10 CUS - 0825031
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm, Number of individual labels: 10
Zack Marker strip, flat - ZBF10,LGS:FORTL.ZAHLEN - 0810009
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm,
Number of individual labels: 10
Zack Marker strip, flat - ZBF10,QR:FORTL.ZAHLEN - 0810025
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm,
Number of individual labels: 10
09/04/2020 Page 23 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Marker for terminal blocks - UC-TMF 10 CUS - 0824662
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 5.1 mm, Number of individual
labels: 48
Marker for terminal blocks - UCT-TMF 10 CUS - 0829679
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.4 x 4.7 mm, Number of individual
labels: 36
Planning and marking software
Software - CLIP-PROJECT ADVANCED - 5146040
Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.
Software - CLIP-PROJECT PROFESSIONAL - 5146053
Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and
labels for identifying terminal blocks, conductors and cables, and devices.
Reducing bridge
Reducing bridge - RB ST 10-(2,5/4) - 3030873
Reducing bridge, pitch: 10 mm, length: 36.3 mm, width: 15 mm, number of positions: 2, color: red
09/04/2020 Page 24 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Screwdriver - SZF 3-1,0X5,5 - 1206612
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 1.0 x 5.5 x 150 mm, 2component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB 10:UNBEDRUCKT - 1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual
labels: 10
Marker for terminal blocks - UC-TM 10 - 0818069
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48
09/04/2020 Page 25 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Marker for terminal blocks - UCT-TM 10 - 0829142
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field
size: 8.9 x 9.6 mm, Number of individual labels: 36
Zack Marker strip, flat - ZBF10:UNBEDRUCKT - 0809997
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm, Number of individual
labels: 10
Marker for terminal blocks - UC-TMF 10 - 0818124
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 10.2 mm, lettering field size: 9.6 x 5.1 mm, Number of individual labels: 48
Marker for terminal blocks - UCT-TMF 10 - 0829204
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 10.2 mm, lettering field
size: 9.4 x 4.7 mm, Number of individual labels: 36
Marker for terminal blocks - TMT (EX9,5)R - 0828295
Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK
ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: snap
into universal marker groove, snap into tall marker groove, for terminal block width: 50000 mm, lettering field size: 9.5 x
50000 mm, Number of individual labels: 1
09/04/2020 Page 26 / 27
https://www.phoenixcontact.com/us/products/3212124
Feed-through terminal block - PT 10 OG - 3212124
Accessories
Marker for terminal blocks - US-TM 100 - 0829255
Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into universal marker
groove, lettering field size: 104 x 9.8 mm, Number of individual labels: 13
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Warning label printed
Warning label - WS PT 10 - 1029030
Warning label, yellow/black, labeled: Lightning flash, mounting type: plug in, for terminal block width: 10.2 mm
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
09/04/2020 Page 27 / 27