3212144

https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, nom. voltage: 1000 V, nominal current: 76 A, connection method: Push-in connection, number of connections: 2, cross section: 0.5 mm² - 25 mm², AWG: 20 - 4, width: 12.2 mm, color: orange, mounting type: NS 35/7,5, NS 35/15 Your advantages  The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors  The compact design and front connection enable wiring in a confined space  In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection  Tested for railway applications Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356897853 Weight per Piece (excluding packing) 31.200 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 16 mm² 08/26/2019   Page 1 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Technical data General Color orange Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 2.43 W Designation Level 1 above 1 below 1 Maximum load current 85 A (with 25 mm² conductor cross section) Nominal current IN 76 A Nominal voltage UN 1000 V Open side panel Yes Dimensions Width 12.2 mm End cover width 2.2 mm Length 75.4 mm Height NS 35/7,5 52.6 mm Height NS 35/15 60.1 mm Connection data Connection 1 level Connection method Push-in connection Stripping length 18 mm Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 25 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 4 Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 16 mm² Min. AWG conductor cross section, flexible 20 Max. AWG conductor cross section, flexible 6 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 16 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 16 mm² 08/26/2019   Page 2 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Technical data Connection data 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 4 mm² sleeve, max. Internal cylindrical gage A7 Standards and Regulations Connection in acc. with standard IEC 60947-7-1 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Classifications eCl@ss eCl@ss 4.1 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 08/26/2019   Page 3 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Approvals Approvals Approvals DNV GL / CSA / PRS / BV / LR / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Zeichengenehmigung / EAC / EAC / cULus Recognized Ex Approvals IECEx / ATEX / UL Recognized / cUL Recognized / EAC Ex / cULus Recognized Approval details DNV GL    https://approvalfinder.dnvgl.com/  TAE000010T CSA    http://www.csagroup.org/services-industries/product-listing/  13631   B C Nominal voltage UN 600 V 600 V Nominal current IN 70 A 70 A mm²/AWG/kcmil 20-4 20-4 PRS    http://www.prs.pl/  TE/2107/880590/16 BV    http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials  37796/A2 BV LR    http://www.lr.org/en  12/20038 (E3) 08/26/2019   Page 4 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 85 A 85 A mm²/AWG/kcmil 20-4 20-4 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 85 A 85 A mm²/AWG/kcmil 20-4 20-4 IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 1000 V Nominal current IN 76 A mm²/AWG/kcmil 0.5-16 VDE Zeichengenehmigung    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 1000 V Nominal current IN 76 A mm²/AWG/kcmil 0.5-16 EAC      FILE E 60425  FILE E 60425  DE1-60912  40040917  EAC-Zulassung 08/26/2019   Page 5 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Approvals EAC  cULus Recognized      RU CDE.AI30.B.01102      Accessories Accessories Crimping tool Crimping pliers - CRIMPFOX CENTRUS 6S - 1213144 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² … 6 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection     Crimping pliers - CRIMPFOX CENTRUS 10S - 1213154 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection     Crimping pliers - CRIMPFOX CENTRUS 6H - 1213146 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² … 6 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection     08/26/2019   Page 6 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories Crimping pliers - CRIMPFOX CENTRUS 10H - 1213156 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection     Crimping pliers - CRIMPFOX 10S - 1212045 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 10 mm², unlockable pressure lock, lateral entry     Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry     Crimping pliers - CRIMPFOX 2,5-M - 1212719 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 2.5 mm², lateral entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 6-M - 1212720 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp     08/26/2019   Page 7 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories Crimping pliers - CRIMPFOX 6 - 1212034 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 6T - 1212037 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6 mm², lateral entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 6T-F - 1212038 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6 mm², front entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 6S-F - 1212043 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.5 mm² ... 6 mm², front entry, square crimp     Crimping pliers - CRIMPFOX 10 - 1212721 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 4 mm² ... 10 mm², lateral entry, trapezoidal crimp     08/26/2019   Page 8 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories Crimping pliers - CRIMPFOX 25R - 1212039 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 10 mm² ... 25 mm², lateral entry, WM crimp     Crimping pliers - CRIMPFOX-M - 1212072 Basic pliers, for accommodating dies for a wide range of type of contacts     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     08/26/2019   Page 9 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     08/26/2019   Page 10 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     08/26/2019   Page 11 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     08/26/2019   Page 12 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     Documentation Mounting material - PT-IL - 3208090 Operating decal for the push-in Technology     End block End clamp - E/UK - 1201442 End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     08/26/2019   Page 13 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End cover End cover - D-PT 16 N - 3212060 End cover, length: 75.4 mm, width: 2.2 mm, height: 45.6 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     08/26/2019   Page 14 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     08/26/2019   Page 15 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-12 - 3005950 Plug-in bridge, pitch: 12 mm, number of positions: 2, color: red     Labeled terminal marker Zack Marker strip, flat - ZBF 12 CUS - 0825018 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 12 mm, lettering field size: 5.15 x 12.15 mm     Marker for terminal blocks - UC-TMF 12 CUS - 0824670 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 5.1 mm     Marker for terminal blocks - UCT-TMF 12 CUS - 0829686 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 12 mm, lettering field size: 11.2 x 4.7 mm     08/26/2019   Page 16 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories Zack marker strip - ZB 12 CUS - 0824942 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm     Zack marker strip - ZB 12,LGS:L1-N,PE - 0812146 Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm     Marker for terminal blocks - UC-TM 12 CUS - 0824613 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm     Marker for terminal blocks - UCT-TM 12 CUS - 0829630 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm     Planning and marking software Software - CLIP-PROJECT ADVANCED - 5146040 Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.     08/26/2019   Page 17 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories Software - CLIP-PROJECT PROFESSIONAL - 5146053 Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and labels for identifying terminal blocks, conductors and cables, and devices.     Reducing bridge Reducing bridge - RB ST 16-(2,5/4) - 3030886 Reducing bridge, pitch: 11 mm, length: 37.2 mm, width: 17.4 mm, number of positions: 2, color: red     Reducing bridge - RB 16-6 - 3047072 Reducing bridge, pitch: 12.2 mm, number of positions: 2, color: red     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Screwdriver - SZF 3-1,0X5,5 - 1206612 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 1.0 x 5.5 x 150 mm, 2component grip, with non-slip grip     08/26/2019   Page 18 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories Terminal marking Zack Marker strip, flat - ZBF 12:UNBEDRUCKT - 0809735 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 12 mm, lettering field size: 5.15 x 12.15 mm     Marker for terminal blocks - UC-TMF 12 - 0819233 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 5.1 mm     Marker for terminal blocks - UCT-TMF 12 - 0829214 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 12 mm, lettering field size: 11.2 x 4.7 mm     Zack marker strip - ZB 12:UNPRINTED - 0812120 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 12 x 10.5 mm     Marker for terminal blocks - UC-TM 12 - 0819194 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm     08/26/2019   Page 19 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories Marker for terminal blocks - UCT-TM 12 - 0829144 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm     Marker for terminal blocks - TMT (EX9,5)R - 0828295 Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: snap into universal marker groove, snap into tall marker groove, for terminal block width: 50000 mm, lettering field size: 9.5 x 50000 mm     Marker for terminal blocks - US-TM 100 - 0829255 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into universal marker groove, lettering field size: 104 x 9.8 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray     Warning label printed Warning label - WS PT 16 - 1029033 Warning label, yellow/black, labeled: Lightning flash, mounting type: Plug in, for terminal block width: 12.2 mm     08/26/2019   Page 20 / 21 https://www.phoenixcontact.com/us/products/3212144 Feed-through terminal block - PT 16 N OG - 3212144 Accessories Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 08/26/2019   Page 21 / 21