3213949

https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Installation level terminal block, Push-in connection, Cross section:  0.14 mm² - 4 mm², AWG: 26 - 12, Width: 5.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Product Features  Double function shafts on all levels Key commercial data Packing unit 1 PCE Minimum order quantity 50 PCE Weight per Piece (excluding packing) 18.4 GRM Custom tariff number 85369010 Country of origin Germany Technical data General Note Assembly instructions: For secure fastening of the neutral busbar, supports must be set at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips. Number of levels 3 Number of connections 5 Color gray Insulating material PA Inflammability class according to UL 94 V0 Maximum load current 30 A (with 4 mm² conductor cross section and 3-pos. terminal block) 24 A (with 2.5 mm² conductor cross section) Rated surge voltage 4 kV 6 kV 21.11.2013   Page 1 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Technical data General Pollution degree 3 Surge voltage category III Insulating material group I Nominal current IN 24 A (with 4 mm² conductor cross section) Nominal voltage UN 400 V (phase conductor/phase conductor) 250 V (phase conductor/PE) Open side panel ja Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Surge voltage test setpoint 7.3 kV Result of surge voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of power-frequency withstand voltage test Test passed Checking the mechanical stability of terminal points (5 x conductor connection) Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 4 mm² / 0.9 kg Result of bending test Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Tensile test result Test passed Tight fit on carrier NS 35 Setpoint 1N Result of tight fit test Test passed Requirements, voltage drop ≤ 3.2 mV Result of voltage drop test Test passed Temperature-rise test Test passed Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Short circuit stability result Test passed 21.11.2013   Page 2 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Technical data General Ageing test for screwless modular terminal block temperature cycles 192 Result of aging test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Result of thermal test Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 0.964 (m/s ) /Hz Acceleration 0.58 g Test duration per axis 5h Test directions X-, Y- and Z-axis Oscillation, broadband noise test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Shock test result Test passed Temperature index, insulating material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C 2 2 Dimensions Width 5.2 mm Length 101 mm Height 48.60 mm Height NS 35/7,5 50.5 mm Height NS 35/15 58 mm Connection data Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 12 Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 4 mm² Min. AWG conductor cross section, stranded 26 Max. AWG conductor cross section, stranded 12 21.11.2013   Page 3 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Technical data Connection data Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, max. Connection method Push-in connection Stripping length 10 mm Internal cylindrical gage A3 Classifications eCl@ss eCl@ss 4.0 27141121 eCl@ss 4.1 27141121 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 ETIM ETIM 4.0 EC000897 ETIM 5.0 EC001329 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / GOST / VDE Zeichengenehmigung / IECEE CB Scheme / GL / cULus Recognized 21.11.2013   Page 4 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Approvals Ex Approvals Approvals submitted Approval details UL Recognized    B C D mm²/AWG/kcmil 26-12 26-12 26-12 Nominal current IN 20 A 20 A 10 A Nominal voltage UN 300 V 150 V 300 V   B C D mm²/AWG/kcmil 26-12 26-12 26-12 Nominal current IN 20 A 20 A 10 A Nominal voltage UN 300 V 150 V 300 V cUL Recognized  GOST  VDE Zeichengenehmigung      mm²/AWG/kcmil 0.2-4 Nominal current IN 24 A 21.11.2013   Page 5 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Approvals IECEE CB Scheme      mm²/AWG/kcmil 0.2-4 Nominal current IN 24 A GL  cULus Recognized  Accessories Accessories Bridge Plug-in bridge - FBS 2-5 - 3030161 Plug-in bridge, Number of positions: 2, Color: red     Plug-in bridge - FBS 3-5 - 3030174 Plug-in bridge, Number of positions: 3, Color: red     Plug-in bridge - FBS 4-5 - 3030187 Plug-in bridge, Number of positions: 4, Color: red     21.11.2013   Page 6 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Accessories Plug-in bridge - FBS 5-5 - 3030190 Plug-in bridge, Number of positions: 5, Color: red     Plug-in bridge - FBS 10-5 - 3030213 Plug-in bridge, Number of positions: 10, Color: red     Plug-in bridge - FBS 20-5 - 3030226 Plug-in bridge, Number of positions: 20, Color: red     Plug-in bridge - FBS 50-5 - 3038930 Plug-in bridge, Number of positions: 50, Color: red     Documentation Mounting material - PT-IL - 3208090 Operating decal for the Push-in Technology     21.11.2013   Page 7 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Accessories End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End cover End cover - D-PTI/3 - 3213975 End cover, Length: 101 mm, Width: 2.2 mm, Height: 48.2 mm, Color: gray     Spacer plate - DP PS-5 - 3036725 Spacer plate, Color: red     21.11.2013   Page 8 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Accessories Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, Color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, Color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, Color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, Color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, Color: green     21.11.2013   Page 9 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Accessories Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, Color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, Color: black     Insulation stop sleeve - ISH 2,5/0,2 - 3002843 Insulation stop sleeve, Color: white     Insulation stop sleeve - ISH 2,5/0,5 - 3002856 Insulation stop sleeve, Color: gray     Insulation stop sleeve - ISH 2,5/1,0 - 3002869 Insulation stop sleeve, Color: black     Labeled terminal marker 21.11.2013   Page 10 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Accessories Zack marker strip - ZB 5 CUS - 0824962 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm     Marker for terminal blocks - UC-TM 5 CUS - 0824581 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 CUS - 0829595 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, Lettering field: 4.6 x 10.5 mm     Zack Marker strip, flat - ZBF 5 CUS - 0825025 Zack Marker strip, flat, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm     Marker for terminal blocks - UC-TMF 5 CUS - 0824638 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm     21.11.2013   Page 11 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Accessories Marker for terminal blocks - UCT-TMF 5 CUS - 0829658 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.4 x 4.7 mm     Mounting rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     21.11.2013   Page 12 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     21.11.2013   Page 13 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Accessories DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35)     DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm     21.11.2013   Page 14 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Accessories DIN rail - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m     Partition plate 21.11.2013   Page 15 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Accessories Partition plate - ATP-PTI/3 - 3213990 Partition plate, Length: 103 mm, Width: 2.2 mm, Height: 49.3 mm, Color: gray     Planning and marking software Software - CLIP-PROJECT ADVANCED - 5146040 Multilingual software for easy planning of Phoenix Contact on DIN rails together with the integrated TRABTECH-select software module for planning comprehensive surge protection concepts.     Software - CLIP-PROJECT PROFESSIONAL - 5146053 Multi-lingual software for terminal strip project planning. A marking module allows professional labeling of markers and labels for marking terminal blocks, conductors, cables and devices. The additionally integrated software module TRABTECH-select for planning comprehensive surge protection concepts.     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Support 21.11.2013   Page 16 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Accessories Support bracket - AB-PTI/3 - 3213974 Support bracket, Bracket for busbars, set every 20 cm, Length: 103 mm, Width: 2 mm, Height: 46 mm, Color: blue     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm     Marker for terminal blocks - UC-TM 5 - 0818108 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 10.5 mm     Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642 Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.1 x 5.2 mm     21.11.2013   Page 17 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Accessories Marker for terminal blocks - UC-TMF 5 - 0818153 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 5 - 0828744 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.4 x 4.7 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, Color: silver     Test adapter - PAI-4-N GY - 3032871 Test adapter, Color: gray     Test adapter - PS-5 - 3030983 Test adapter, Color: red     21.11.2013   Page 18 / 19 https://www.phoenixcontact.com/us/products/3213949 Installation level terminal block - PTI 2,5-PE/L/L - 3213949 Accessories Test plugs - PS-5/2,3MM RD - 3038723 Test plugs, Color: red     Drawings Circuit diagram © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 21.11.2013   Page 19 / 19