https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Installation level terminal block, Push-in connection, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2
mm, color: gray, mounting type: NS 35/7,5, NS 35/15
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4046356609593
Weight per Piece (excluding packing)
15.200 g
Custom tariff number
85369010
Country of origin
Germany
Technical data
General
Note
Assembly instructions:For secure fastening of the neutral busbar, supports
must be set at the beginning and end of each terminal strip as well as
every 20 cm on longer terminal strips.
Number of levels
3
Number of connections
4
Potentials
2
Nominal cross section
2.5 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Maximum load current
30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
08/04/2019 Page 1 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Technical data
General
24 A (with a 2.5 mm² conductor cross section)
Rated surge voltage
4 kV
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Designation
Level 1+2+3 above 1 below 1
Maximum load current
30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
Nominal current IN
24 A (with 4 mm² conductor cross section)
Nominal voltage UN
400 V (phase conductor/phase conductor)
250 V (phase conductor/N)
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Note regarding shock protection
Depending on the end application with regard to the busbar.
Result of surge voltage test
Test passed
Surge voltage test setpoint
7.3 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
4 mm² / 0.9 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.14 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
4 mm²
Tractive force setpoint
60 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
1N
Result of voltage-drop test
Test passed
08/04/2019 Page 2 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Technical data
General
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
4 mm²
Short-time current
0.48 kA
Conductor cross section short circuit testing
4 mm²
Short-time current
0.48 kA
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
0.964 (m/s ) /Hz
Acceleration
0.58 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
08/04/2019 Page 3 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Technical data
General
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
5.2 mm
End cover width
2.2 mm
Length
101 mm
Height NS 35/7,5
50.5 mm
Height NS 35/15
58 mm
Connection data
Connection
1st, 2nd and 3rd level
Connection method
Push-in connection
Stripping length
8 mm ... 10 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
4 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, max.
Internal cylindrical gage
A3
Connection method
Push-in connection
Stripping length
8 mm ... 10 mm
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, max.
Standards and Regulations
Connection in acc. with standard
CUL
Flammability rating according to UL 94
V0
08/04/2019 Page 4 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Technical data
Standards and Regulations
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Classifications
eCl@ss
eCl@ss 4.0
27141121
eCl@ss 4.1
27141121
eCl@ss 5.0
27141120
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141125
eCl@ss 8.0
27141125
eCl@ss 9.0
27141125
ETIM
ETIM 4.0
EC000897
ETIM 5.0
EC001329
ETIM 6.0
EC001329
ETIM 7.0
EC001329
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
08/04/2019 Page 5 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Approvals
Approvals
DNV GL / CSA / LR / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Zeichengenehmigung / EAC / cULus Recognized
Ex Approvals
Approval details
DNV GL
https://approvalfinder.dnvgl.com/
TAE00001BU
CSA
http://www.csagroup.org/services-industries/product-listing/
13631
B
C
D
Nominal voltage UN
300 V
150 V
300 V
Nominal current IN
20 A
20 A
10 A
mm²/AWG/kcmil
26-12
26-12
26-12
LR
http://www.lr.org/en
14/20062
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
B
C
D
Nominal voltage UN
300 V
150 V
300 V
Nominal current IN
20 A
20 A
10 A
mm²/AWG/kcmil
26-12
26-12
26-12
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
D
Nominal voltage UN
300 V
150 V
300 V
Nominal current IN
20 A
20 A
10 A
FILE E 60425
08/04/2019 Page 6 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Approvals
B
C
D
mm²/AWG/kcmil
26-12
26-12
26-12
IECEE CB Scheme
http://www.iecee.org/
Nominal voltage UN
400 V
Nominal current IN
24 A
mm²/AWG/kcmil
0.2-4
VDE Zeichengenehmigung
http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx
Nominal voltage UN
400 V
Nominal current IN
24 A
mm²/AWG/kcmil
0.2-4
EAC
cULus Recognized
DE1-57041
40037480
RU CDE.AI30.B.01102
Accessories
Accessories
Cover profile
Cover profile - AP-NLS N - 1013634
Cover profile, length: 300 mm, color: transparent
DIN rail
08/04/2019 Page 7 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
08/04/2019 Page 8 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
08/04/2019 Page 9 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
08/04/2019 Page 10 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
Documentation
Mounting material - PT-IL - 3208090
Operating decal for the push-in Technology
08/04/2019 Page 11 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End cover
End cover - D-PTI/3 - 3213975
End cover, length: 101 mm, width: 2.2 mm, height: 48.2 mm, color: gray
Filler plug
08/04/2019 Page 12 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
Filler plugs - CEC 2,5 - 3062757
Cover for conductor shaft, 10-pos., for spring cage terminal blocks (ST) and terminal blocks with push-in technology (PT)
with a width of 5.2 mm
Installation terminal block
Connection terminal block - AKG 16 BU - 0423014
Connection terminal block, connection method: Screw connection, load current: 76 A, cross section: 1.5 mm² - 16 mm²,
width: 9.8 mm, color: blue
Connection terminal block - AKG 35 BU - 0424013
Connection terminal block, connection method: Screw connection, load current: 125 A, cross section: 2.5 mm² - 35 mm²,
width: 14.3 mm, color: blue
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
08/04/2019 Page 13 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
08/04/2019 Page 14 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
Insulating sleeve - ISH 2,5/0,2 - 3002843
Insulating sleeve, color: white
Insulating sleeve - ISH 2,5/0,5 - 3002856
Insulating sleeve, color: gray
Insulating sleeve - ISH 2,5/1,0 - 3002869
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-5 - 3030161
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-5 - 3030174
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 14.2 mm, number of positions: 3, color: red
08/04/2019 Page 15 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
Plug-in bridge - FBS 4-5 - 3030187
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 19.4 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-5 - 3030190
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 24.6 mm, number of positions: 5, color: red
Plug-in bridge - FBS 10-5 - 3030213
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 50.6 mm, number of positions: 10, color: red
Plug-in bridge - FBS 20-5 - 3030226
Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: red
Plug-in bridge - FBS 50-5 - 3038930
Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: red
08/04/2019 Page 16 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
Plug-in bridge - FBSR 2-5 - 3033702
Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: red
Plug-in bridge - FBSR 3-5 - 3001591
Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: red
Plug-in bridge - FBSR 4-5 - 3001592
Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: red
Plug-in bridge - FBSR 5-5 - 3001593
Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: red
Plug-in bridge - FBSR 10-5 - 3033710
Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: red
08/04/2019 Page 17 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
Plug-in bridge - FBS 2-5 BU - 3036877
Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 3-5 BU - 3036880
Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: blue
Plug-in bridge - FBS 4-5 BU - 3036893
Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-5 BU - 3036903
Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 10-5 BU - 3036916
Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: blue
08/04/2019 Page 18 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
Plug-in bridge - FBS 20-5 BU - 3036929
Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: blue
Plug-in bridge - FBS 50-5 BU - 3032114
Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: blue
Labeled terminal marker
Zack Marker strip, flat - ZBF 5 CUS - 0825025
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ...
500, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
08/04/2019 Page 19 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ...
100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Marker for terminal blocks - UC-TMF 5 CUS - 0824638
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 5 CUS - 0829658
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm
Neutral conductor rail
Neutral busbar - NLS-CU 3/10 SN 1000MM - 0402174
Neutral busbar, width: 10 mm, height: 3 mm, DIN VDE 0611-4: 1991-02, material: Copper, tin-plated, length: 1000 mm,
color: silver
08/04/2019 Page 20 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
Partition plate
Partition plate - ATP-PTI/3 - 3213990
Partition plate, length: 103 mm, width: 2.2 mm, height: 49.3 mm, color: gray
Spacer plate - DP PS-5 - 3036725
Spacer plate, length: 22.4 mm, width: 5.2 mm, height: 29 mm, number of positions: 1, color: red
Planning and marking software
Software - CLIP-PROJECT ADVANCED - 5146040
Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.
Software - CLIP-PROJECT PROFESSIONAL - 5146053
Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and
labels for identifying terminal blocks, conductors and cables, and devices.
Screwdriver tools
08/04/2019 Page 21 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Screwdriver - ST-BW - 1207608
Actuation tool, for all 2.5 mm² - 4.0 mm² spring-cages
Support
Support bracket - AB-PTI/3 - 3213974
Support bracket, Bracket for busbars, set every 20 cm, pitch: 200 mm, length: 103 mm, width: 2 mm, height: 46 mm,
number of positions: 1, color: blue
Terminal marking
Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.1 x 5.2 mm
Marker for terminal blocks - UC-TMF 5 - 0818153
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 5.2 mm, lettering field size: 4.6 x 5.1 mm
08/04/2019 Page 22 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
Marker for terminal blocks - UCT-TMF 5 - 0828744
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size:
4.4 x 4.7 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Test plugs - PS-5 - 3030983
Test plugs, color: red
Test plugs - PS-5/2,3MM RD - 3038723
Test plugs, color: red
Test socket
08/04/2019 Page 23 / 24
https://www.phoenixcontact.com/us/products/3213954
Installation level terminal block - PTI 2,5-L/N - 3213954
Accessories
Test adapter - PAI-4-N GY - 3032871
4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch
Warning label printed
Warning label - WS PT 2,5 - 1029026
Warning label, yellow/black, labeled: Lightning flash, mounting type: Plug in, for terminal block width: 5.2 mm
Warning label - WS-DIO PT 2,5 - 1029037
Warning label, yellow/black, labeled: Diode, mounting type: Plug in, for terminal block width: 5.2 mm
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
08/04/2019 Page 24 / 24
