3213955

https://www.phoenixcontact.com/us/products/3213955 Installation ground terminal block - PTI 2,5-PE/L/NTB - 3213955 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Installation ground terminal block, Push-in connection, Cross section:  0.14 mm² - 4 mm², AWG: 26 - 12, Width: 5.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Product Features ■ ■ Double function shafts on all levels The terminal blocks with knife disconnect zone in the upper level meet the safety requirement regarding individual circuit isolation of DIN VDE 0100-718 Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc Weight per Piece (excluding packing) 19.6 g Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 3 Number of connections 5 Potentials 3 Nominal cross section 2.5 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 4 kV 6 kV Degree of pollution 3 Overvoltage category III 05/10/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/3213955 Installation ground terminal block - PTI 2,5-PE/L/NTB - 3213955 Technical data General Insulating material group I Maximum load current 30 A (with 4 mm² conductor cross section and 3-pos. terminal block) Nominal current IN 24 A (with 4 mm² conductor cross section) Nominal voltage UN 400 V (phase conductor/phase conductor) 250 V (phase conductor/PE) 250 V (phase conductor/N) Maximum load current 16 A (with 4 mm² conductor cross section) Nominal current IN 16 A Nominal voltage UN 250 V Open side panel Yes Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 7.3 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 4 mm² / 0.9 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 4 mm² 05/10/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/3213955 Installation ground terminal block - PTI 2,5-PE/L/NTB - 3213955 Technical data General Short-time current 0.48 kA Conductor cross section short circuit testing 1.5 mm² Short-time current 0.18 kA Result of aging test Test passed Ageing test for screwless modular terminal block temperature cycles 192 Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 0.02 g²/Hz Acceleration 0,8 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Dimensions Width 5.2 mm End cover width 2.2 mm Length 101 mm Height NS 35/7,5 50.5 mm Height NS 35/15 58 mm Connection data Note Please observe the current carrying capacity of the DIN rails. Connection method Push-in connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 4 mm² 05/10/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/3213955 Installation ground terminal block - PTI 2,5-PE/L/NTB - 3213955 Technical data Connection data Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 4 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, max. Stripping length 8 mm ... 10 mm Internal cylindrical gage A3 Connection method Push-in connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 4 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, max. Stripping length 8 mm ... 10 mm Standards and Regulations Connection in acc. with standard CUL Flammability rating according to UL 94 V0 05/10/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/3213955 Installation ground terminal block - PTI 2,5-PE/L/NTB - 3213955 Classifications eCl@ss eCl@ss 4.0 27141121 eCl@ss 4.1 27141121 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141125 ETIM ETIM 4.0 EC000897 ETIM 5.0 EC001329 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / VDE Zeichengenehmigung / IECEE CB Scheme / GL / LR / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details 05/10/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/3213955 Installation ground terminal block - PTI 2,5-PE/L/NTB - 3213955 Approvals UL Recognized    B D mm²/AWG/kcmil 26-12 26-12 Nominal current IN 20 A 10 A Nominal voltage UN 300 V 300 V   B D mm²/AWG/kcmil 26-12 26-12 Nominal current IN 20 A 10 A Nominal voltage UN 300 V 300 V cUL Recognized  VDE Zeichengenehmigung      mm²/AWG/kcmil 0.2-4 IECEE CB Scheme      mm²/AWG/kcmil 0.2-4 GL  LR  EAC  cULus Recognized  05/10/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/3213955 Installation ground terminal block - PTI 2,5-PE/L/NTB - 3213955 Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/10/2016   Page 7 / 7