https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Installation level terminal block, Push-in connection, Cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, Width: 5.2
mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
Product Features
The terminal blocks with knife disconnect zone in the upper level meet the safety requirement regarding individual circuit isolation of DIN VDE
0100-718
Key commercial data
Packing unit
1 PCE
Minimum order quantity
50 PCE
Weight per Piece (excluding packing)
19.6 GRM
Custom tariff number
85369010
Country of origin
Germany
Technical data
General
Number of levels
3
Number of connections
5
Color
gray
Insulating material
PA
Inflammability class according to UL 94
V0
Maximum load current
30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
24 A (with 2.5 mm² conductor cross section)
Rated surge voltage
4 kV
6 kV
Pollution degree
3
Surge voltage category
III
Insulating material group
I
21.11.2013 Page 1 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Technical data
General
Nominal current IN
24 A (with 4 mm² conductor cross section)
Nominal voltage UN
400 V (phase conductor/phase conductor)
250 V (phase conductor/PE)
Open side panel
ja
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Surge voltage test setpoint
7.3 kV
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of power-frequency withstand voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor
connection)
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
4 mm² / 0.9 kg
Result of bending test
Test passed
Conductor cross section tensile test
0.14 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
4 mm²
Tractive force setpoint
60 N
Tensile test result
Test passed
Tight fit on carrier
NS 35
Setpoint
1N
Result of tight fit test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of voltage drop test
Test passed
Temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
Short-time current
0.48 kA
Conductor cross section short circuit testing
1.5 mm²
Short-time current
0.18 kA
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of aging test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
21.11.2013 Page 2 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Technical data
General
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s ) /Hz
Acceleration
0.8 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Temperature index, insulating material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Static insulating material application in cold
-60 °C
2 2
Dimensions
Width
5.2 mm
Length
101 mm
Height NS 35/7,5
50.5 mm
Height NS 35/15
58 mm
Connection data
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG/kcmil min.
26
Conductor cross section AWG/kcmil max
12
Conductor cross section stranded min.
0.14 mm²
Conductor cross section stranded max.
4 mm²
Min. AWG conductor cross section, stranded
26
Max. AWG conductor cross section, stranded
12
Conductor cross section stranded, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max.
2.5 mm²
21.11.2013 Page 3 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Technical data
Connection data
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, max.
Connection method
Push-in connection
Stripping length
10 mm
Internal cylindrical gage
A3
Classifications
eCl@ss
eCl@ss 4.0
27141121
eCl@ss 4.1
27141121
eCl@ss 5.0
27141120
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
ETIM
ETIM 4.0
EC000897
ETIM 5.0
EC001329
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / GOST / GL / cULus Recognized
Ex Approvals
21.11.2013 Page 4 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Approvals
Approvals submitted
Approval details
UL Recognized
B
D
mm²/AWG/kcmil
26-12
26-12
Nominal current IN
20 A
10 A
Nominal voltage UN
300 V
300 V
cUL Recognized
B
mm²/AWG/kcmil
26-12
26-12
Nominal current IN
20 A
10 A
Nominal voltage UN
300 V
300 V
D
GOST
GL
cULus Recognized
Accessories
Accessories
Bridge
21.11.2013 Page 5 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Accessories
Plug-in bridge - FBS 2-5 - 3030161
Plug-in bridge, Number of positions: 2, Color: red
Plug-in bridge - FBS 3-5 - 3030174
Plug-in bridge, Number of positions: 3, Color: red
Plug-in bridge - FBS 4-5 - 3030187
Plug-in bridge, Number of positions: 4, Color: red
Plug-in bridge - FBS 5-5 - 3030190
Plug-in bridge, Number of positions: 5, Color: red
Plug-in bridge - FBS 10-5 - 3030213
Plug-in bridge, Number of positions: 10, Color: red
21.11.2013 Page 6 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Accessories
Plug-in bridge - FBS 20-5 - 3030226
Plug-in bridge, Number of positions: 20, Color: red
Plug-in bridge - FBS 50-5 - 3038930
Plug-in bridge, Number of positions: 50, Color: red
Documentation
Mounting material - PT-IL - 3208090
Operating decal for the Push-in Technology
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
21.11.2013 Page 7 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Accessories
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End cover
End cover - D-PTI/3B - 3213976
End cover, Length: 101 mm, Width: 2.2 mm, Color: gray
Spacer plate - DP PS-5 - 3036725
Spacer plate, Color: red
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, Color: white
21.11.2013 Page 8 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Accessories
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, Color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, Color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, Color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, Color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, Color: gray
21.11.2013 Page 9 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Accessories
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, Color: black
Insulation stop sleeve - ISH 2,5/0,2 - 3002843
Insulation stop sleeve, Color: white
Insulation stop sleeve - ISH 2,5/0,5 - 3002856
Insulation stop sleeve, Color: gray
Insulation stop sleeve - ISH 2,5/1,0 - 3002869
Insulation stop sleeve, Color: black
Labeled terminal marker
Zack marker strip - ZB 5 CUS - 0824962
Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into
tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
21.11.2013 Page 10 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Accessories
Marker for terminal blocks - UC-TM 5 CUS - 0824581
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm
Marker for terminal blocks - UCT-TM 5 CUS - 0829595
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, Lettering field: 4.6 x 10.5 mm
Zack Marker strip, flat - ZBF 5 CUS - 0825025
Zack Marker strip, flat, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap
into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm
Marker for terminal blocks - UC-TMF 5 CUS - 0824638
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 5 CUS - 0829658
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.4 x 4.7 mm
Marker carriers
21.11.2013 Page 11 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Accessories
Marker carriers - CARRIER-TM 300 - 0828282
Marker carriers, gray, Unlabeled, Mounting type: Snap into flat marker groove, Lettering field: 10.5 x 300 mm
Mounting rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
21.11.2013 Page 12 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Accessories
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
21.11.2013 Page 13 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Accessories
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
21.11.2013 Page 14 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Accessories
DIN rail - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
Partition plate
21.11.2013 Page 15 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Accessories
Partition plate - ATP-PTI/3 - 3213990
Partition plate, Length: 103 mm, Width: 2.2 mm, Height: 49.3 mm, Color: gray
Planning and marking software
Software - CLIP-PROJECT ADVANCED - 5146040
Multilingual software for easy planning of Phoenix Contact on DIN rails together with the integrated TRABTECH-select
software module for planning comprehensive surge protection concepts.
Software - CLIP-PROJECT PROFESSIONAL - 5146053
Multi-lingual software for terminal strip project planning. A marking module allows professional labeling of markers
and labels for marking terminal blocks, conductors, cables and devices. The additionally integrated software module
TRABTECH-select for planning comprehensive surge protection concepts.
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Terminal marking
21.11.2013 Page 16 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Accessories
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For
terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm
Marker for terminal blocks - UC-TM 5 - 0818108
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm
Marker for terminal blocks - UCT-TM 5 - 0828734
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 5.2
mm, Lettering field: 4.6 x 10.5 mm
Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642
Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove,
For terminal block width: 5 mm, Lettering field: 5.1 x 5.2 mm
Marker for terminal blocks - UC-TMF 5 - 0818153
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm
21.11.2013 Page 17 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Accessories
Marker for terminal blocks - UCT-TMF 5 - 0828744
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into flat marker groove, For terminal block width: 5.2
mm, Lettering field: 4.4 x 4.7 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, Color: silver
Test adapter - PAI-4-N GY - 3032871
Test adapter, Color: gray
Test adapter - PS-5 - 3030983
Test adapter, Color: red
Test plugs - PS-5/2,3MM RD - 3038723
Test plugs, Color: red
21.11.2013 Page 18 / 19
https://www.phoenixcontact.com/us/products/3213959
Installation level terminal block - PTI 2,5-PE/L/LB - 3213959
Drawings
Circuit diagram
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com
21.11.2013 Page 19 / 19
