https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Potential collective terminal, Connection method: Screw connection, Push-in connection, Number of
connections: 11, Cross section: 1.5 mm² - 50 mm², AWG: 16 - 1/0, Width: 16.3 mm, Color: black/yellow, Mounting
type: NS 35/7,5, NS 35/15
Why buy this product
The terminal block base is ideal for use in building installation and machine building applications
The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring
of conductors with ferrules or solid conductors
The compact design and front connection enable wiring in a confined space
In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection
Key Commercial Data
Packing unit
1
GTIN
GTIN
4055626170572
Custom tariff number
85369010
Technical data
General
Note
In the end application, the applicable safety regulations for overload and
short-circuit protection on the connected conductors must be considered.
Number of levels
1
Number of connections
11
Color
black/yellow
Insulating material
PA
Flammability rating according to UL 94
V0
Degree of pollution
2
04/14/2017 Page 1 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Technical data
General
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
4.06 W (the value is multiplied when connecting multiple levels)
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Maximum load current
105 A (The maximum load current must not be exceeded by the total
current of all connected conductors.)
Nominal current IN
105 A
Nominal voltage UN
1000 V
Connection method
Push-in connection
Connection in acc. with standard
IEC 60947-7-1
Maximum load current
41 A
Nominal current IN
41 A
Nominal voltage UN
1000 V
Open side panel
No
Dimensions
Width
16.3 mm
Length
110.4 mm
Height NS 35/7,5
48.8 mm
Height NS 35/15
56.3 mm
Connection data
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Screw thread
M6
Tightening torque, min
3.2 Nm
Tightening torque max
3.7 Nm
Stripping length
18 mm
Conductor cross section solid min.
1.5 mm²
Conductor cross section solid max.
50 mm²
Conductor cross section AWG min.
16
Conductor cross section AWG max.
1/0
Conductor cross section flexible min.
1.5 mm²
Conductor cross section flexible max.
50 mm²
Min. AWG conductor cross section, flexible
16
Max. AWG conductor cross section, flexible
1/0
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
04/14/2017 Page 2 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Technical data
Connection data
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
2 conductors with same cross section, solid min.
1.5 mm²
2 conductors with same cross section, solid max.
16 mm²
Two conductors with the same cross section, AWG solid min.
16
Two conductors with the same cross section, AWG solid max.
6
2 conductors with same cross section, stranded min.
1.5 mm²
2 conductors with same cross section, stranded max.
10 mm²
Two conductors with the same cross section, AWG stranded, min.
16
Two conductors with the same cross section, AWG stranded, max.
8
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
10 mm²
Internal cylindrical gage
B9
Connection method
Push-in connection
Connection in acc. with standard
IEC 60947-7-1
Stripping length
12 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section AWG min.
20
Conductor cross section AWG max.
8
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
6 mm²
Min. AWG conductor cross section, flexible
20
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
1.5 mm²
sleeve, max.
Conductor cross section solid min.
1 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section AWG min.
18
04/14/2017 Page 3 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Technical data
Connection data
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Connection method
Push-in connection
Connection in acc. with standard
IEC 60947-7-1
Stripping length
8 mm ... 10 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
2.5 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
1.5 mm²
sleeve, max.
Conductor cross section solid min.
0.34 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
IEC 60947-7-1
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
04/14/2017 Page 4 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Technical data
Environmental Product Compliance
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Circuit diagram
1
4
1
6
Classifications
eCl@ss
eCl@ss 4.0
27141127
eCl@ss 4.1
27141127
eCl@ss 5.0
27141127
eCl@ss 5.1
27141111
eCl@ss 6.0
27141148
eCl@ss 7.0
27141148
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
UNSPSC
UNSPSC 6.01
30211812
UNSPSC 7.0901
39121410
UNSPSC 11
39121411
UNSPSC 12.01
39121411
UNSPSC 13.2
39121411
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
04/14/2017 Page 5 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
04/14/2017 Page 6 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
04/14/2017 Page 7 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
04/14/2017 Page 8 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Width: 35 mm, Height: 15 mm, Length: 2000 mm, Color: silver
Documentation
Mounting material - PT-IL - 3208090
Operating decal for the push-in Technology
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
04/14/2017 Page 9 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.5 mm, Color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, Color: white
04/14/2017 Page 10 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, Color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, Color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, Color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, Color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, Color: gray
04/14/2017 Page 11 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, Color: black
Jumper
Plug-in bridge - FBS 2-8 - 3030284
Plug-in bridge, Pitch: 8.2 mm, Length: 3 mm, Width: 14.7 mm, Number of positions: 2, Color: red
Plug-in bridge - FBS 3-8 - 3030297
Plug-in bridge, Pitch: 8.2 mm, Length: 3 mm, Width: 22.9 mm, Number of positions: 3, Color: red
Plug-in bridge - FBS 4-8 - 3030307
Plug-in bridge, Pitch: 8.2 mm, Length: 3 mm, Width: 31.1 mm, Number of positions: 4, Color: red
Plug-in bridge - FBS 5-8 - 3030310
Plug-in bridge, Pitch: 8.2 mm, Length: 3 mm, Width: 39.3 mm, Number of positions: 5, Color: red
04/14/2017 Page 12 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
Plug-in bridge - FBS 10-8 - 3030323
Plug-in bridge, Pitch: 8.2 mm, Length: 3 mm, Width: 80.3 mm, Number of positions: 10, Color: red
Plug-in bridge - FBSR 2-8 - 3033808
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 2, Color: red
Plug-in bridge - FBSR 3-8 - 3001597
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 3, Color: red
Plug-in bridge - FBSR 4-8 - 3000585
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 4, Color: red
Plug-in bridge - FBSR 5-8 - 3033809
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 5, Color: red
04/14/2017 Page 13 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
Plug-in bridge - FBSR 10-8 - 3001599
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 10, Color: red
Plug-in bridge - FBS 2-8 CT - 3033830
Plug-in bridge, Pitch: 8.2 mm, Length: 3 mm, Width: 14.7 mm, Number of positions: 2, Color: orange
Plug-in bridge - FBS 3-8 CT - 3033831
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 3, Color: orange
Plug-in bridge - FBS 4-8 CT - 3033832
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 4, Color: orange
Plug-in bridge - FBS 10-8 CT - 3033833
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 10, Color: orange
Labeled terminal marker
04/14/2017 Page 14 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
Zack marker strip - ZB 16 CUS - 0827463
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into
tall marker groove, for terminal block width: 16.3 mm, Lettering field: 10.5 x 16.25 mm
Zack marker strip - ZB 16,LGS:L1-N,PE - 0827462
Zack marker strip, Strip, white, labeled, Printed horizontally: L1, L2, L3, N, PE, Mounting type: Snap into tall marker
groove, for terminal block width: 16.3 mm, Lettering field: 10.5 x 16.25 mm
Marker for terminal blocks - UC-TM 16 CUS - 0824621
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 16 mm, Lettering field: 15.45 x 10.5 mm
Marker for terminal blocks - UCT-TM 16 CUS - 0829637
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 16 mm, Lettering field: 14.8 x 9.6 mm
Zack Marker strip, flat - ZBF 16 CUS - 0827465
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap
into flat marker groove, for terminal block width: 16 mm, Lettering field: 5.15 x 16 mm
04/14/2017 Page 15 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
Marker for terminal blocks - UC-TMF 16 CUS - 0824678
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into flat marker groove, for terminal block width: 16 mm, Lettering field: 15.45 x 5.1 mm
Marker for terminal blocks - UCT-TMF 16 CUS - 0829693
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into flat marker groove, for terminal block width: 16 mm, Lettering field: 15.2 x 4.7 mm
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Pick-off terminal block
Pick-off terminal block - AGK 4-UT 35 - 3047138
Pick-off terminal block, Connection method: Screw connection, Number of connections: 1, Cross section: 0.14 mm² - 6
mm², AWG: 26 - 10, Width: 8.1 mm, Height: 25.7 mm, Color: gray, Mounting type: On base element
Reducing bridge
04/14/2017 Page 16 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
Reducing bridge - RB ST 6-(2,5/4) - 3030860
Reducing bridge, Pitch: 9 mm, Length: 30 mm, Width: 14.3 mm, Number of positions: 2, Color: red
Screwdriver tools
Screwdriver - SZF 3-1,0X5,5 - 1206612
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 1.0 x 5.5 x 150 mm, 2component grip, with non-slip grip
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Screwdriver - SZF 2-0,8X4,0 - 1204520
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.8 x 4.0 x 100 mm, 2component grip, with non-slip grip
Screwdriver - ST-BW - 1207608
Actuation tool, for all 2.5 mm² - 4.0 mm² spring-cages
04/14/2017 Page 17 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
Short-circuit connector
Short-circuit connector - FBSRH 2-8 - 3033802
Short-circuit connector, Pitch: 8.2 mm, Number of positions: 2, Color: red
Short-circuit connector - FBSRH 3-8 - 3033803
Short-circuit connector, Pitch: 8.2 mm, Number of positions: 3, Color: red
Short-circuit connector - FBSRH 4-8 - 3033804
Short-circuit connector, Pitch: 8.2 mm, Number of positions: 4, Color: red
Terminal marking
Zack marker strip - ZB 16:UNPRINTED - 0827461
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, Mounting type: Snap
into tall marker groove, for terminal block width: 16 mm, Lettering field: 16 x 10.5 mm
Marker for terminal blocks - UC-TM 16 - 0819217
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, Mounting type: Snap into tall marker groove, for terminal block width: 16 mm, Lettering field:
15.45 x 10.5 mm
04/14/2017 Page 18 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
Marker for terminal blocks - UCT-TM 16 - 0829146
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, Mounting type: Snap into tall marker groove, for
terminal block width: 16 mm, Lettering field: 14.8 x 9.6 mm
Zack Marker strip, flat - ZBF 16:UNPRINTED - 0827464
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, Mounting type:
Snap into flat marker groove, Lettering field: 16.25 x 10.5 mm
Marker for terminal blocks - UC-TMF 16 - 0819262
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, Mounting type: Snap into flat marker groove, for terminal block width: 16 mm, Lettering field:
15.45 x 5.1 mm
Marker for terminal blocks - UCT-TMF 16 - 0829218
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, Mounting type: Snap into flat marker groove, for
terminal block width: 16 mm, Lettering field: 15.2 x 4.7 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, Color: silver
04/14/2017 Page 19 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
Test plugs - PS-6 - 3030996
Test plugs, Color: red
Test plugs - PS-6/2,3MM RD - 3038736
Test plugs, Color: red
Test socket
Test adapter - PAI-4-FIX BU - 3032729
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX OG - 3034455
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX YE - 3032745
4 mm test adapter, for terminal blocks with 8.2 mm pitch
04/14/2017 Page 20 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
Test adapter - PAI-4-FIX RD - 3032732
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX GN - 3032758
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX BK - 3032774
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX GY - 3032790
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX VT - 3032761
4 mm test adapter, for terminal blocks with 8.2 mm pitch
04/14/2017 Page 21 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
Test adapter - PAI-4-FIX BN - 3032787
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX WH - 3032797
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAIS-4-FIX GY - 3032791
Test adapter, Color: gray
Test adapter - PAIS-4-FIX BK - 3032792
Test adapter, Color: black
Test adapter - PAIS-4-FIX RD - 3032793
Test adapter, Color: red
04/14/2017 Page 22 / 23
https://www.phoenixcontact.com/us/products/3214082
Potential collective terminal - PTU 35/4X6/6X2,5-FE - 3214082
Accessories
Test adapter - PAIS-4-FIX BU - 3032798
Test adapter, Color: blue
Test adapter - PAIS-4-FIX YE - 3032799
Test adapter, Color: yellow
Test adapter - PAIS-4-FIX GN - 3032801
Test adapter, Color: green
Test adapter - PAIS-4-FIX VT - 3032802
Test adapter, Color: violet
Phoenix Contact 2017 © - all rights reserved
http://www.phoenixcontact.com
04/14/2017 Page 23 / 23