3214322

https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Fuse modular terminal block, fuse type: Glass / ceramics / ..., connection method: Screw connection, cross section: 0.14 mm²- 6 mm², AWG: 26 - 10, nominal current: 28 A, nom. voltage: 60 V, width: 6.2 mm, fuse type: G / 5 x 20, mounting type: NS 35/7,5, NS 35/15, color: black Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356895675 Weight per Piece (excluding packing) 37.200 g Custom tariff number 85369095 Country of origin Poland Technical data General Note The current is determined by the fuse used, the voltage by the selected LED. If the fuse is faulty, the downstream circuit will not be disconnected. Number of levels 3 Number of connections 5 Nominal cross section 4 mm² Color black Insulating material PA Flammability rating according to UL 94 V0 Maximum power dissipation for nominal condition 1.6 W (the value is multiplied when connecting multiple levels) Fuse G / 5 x 20 11/07/2019   Page 1 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Technical data General Fuse type Glass / ceramics / ... Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload) max. 1.6 W (With interconnected arrangement of several fuse terminal blocks in the event of overload) max. 4 W (with single arrangement of the fuse terminal block in the event of a short-circuit) max. 2.5 W (With interconnected arrangement of several fuse terminal blocks in the event of a short-circuit) LED voltage range 30 V AC ... 60 V AC LED current range 0.4 mA ... 0.86 mA Connection in acc. with standard IEC 60947-7-2/IEC 60947-7-3 Maximum load current 36 A (the current is determined by the fuse used) Nominal current IN 28 A Nominal voltage UN 60 V Connection in acc. with standard IEC 60947-7-2/IEC 60947-7-3 Maximum load current (upper level) 6.3 A (the current is determined by the fuse used) Nominal current IN (upper level) 6.3 A Nominal voltage UN 60 V Open side panel No Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 11/07/2019   Page 2 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Technical data General Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 6.2 mm Length 92.7 mm Height NS 35/7,5 88.9 mm Height NS 35/15 96.4 mm Connection data Note Please observe the current carrying capacity of the DIN rails. Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² Connection method Screw connection Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard IEC 60947-7-2/IEC 60947-7-3 IEC 60947-7-2/IEC 60947-7-3 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Environmental Product Compliance Lead 7439-92-1 11/07/2019   Page 3 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Technical data Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141116 eCl@ss 8.0 27141116 eCl@ss 9.0 27141116 ETIM ETIM 4.0 EC000899 11/07/2019   Page 4 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Classifications ETIM ETIM 5.0 EC000899 ETIM 6.0 EC000899 ETIM 7.0 EC000899 UNSPSC UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals IECEx / ATEX / UL Recognized / cUL Recognized / cULus Recognized Approval details CSA    http://www.csagroup.org/services-industries/product-listing/   B C Nominal voltage UN 300 V 300 V Nominal current IN 16 A 16 A mm²/AWG/kcmil 26-10 26-10 UL Recognized    13631  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 300 V 300 V Nominal current IN 16 A 16 A mm²/AWG/kcmil 26-10 26-10  FILE E 60425 D 26-10 11/07/2019   Page 5 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Approvals cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 300 V 300 V Nominal current IN 16 A 16 A mm²/AWG/kcmil 26-10 26-10 EAC  cULus Recognized   FILE E 60425 D 26-10     RU CDE.A*30.B.01742      Accessories Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     11/07/2019   Page 6 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     11/07/2019   Page 7 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     11/07/2019   Page 8 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     11/07/2019   Page 9 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     11/07/2019   Page 10 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-6 - 3030242 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red     Plug-in bridge - FBS 4-6 - 3030255 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red     Plug-in bridge - FBS 5-6 - 3030349 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red     Plug-in bridge - FBS 6-6 - 1008238 Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red     11/07/2019   Page 11 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories Plug-in bridge - FBS 10-6 - 3030271 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red     Plug-in bridge - FBS 20-6 - 3030365 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red     Plug-in bridge - FBS 50-6 - 3032224 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red     Plug-in bridge - FBSR 2-6 - 3033715 Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red     Plug-in bridge - FBSR 3-6 - 3001594 Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red     11/07/2019   Page 12 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories Plug-in bridge - FBSR 4-6 - 3001595 Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red     Plug-in bridge - FBSR 5-6 - 3001596 Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red     Plug-in bridge - FBSR 10-6 - 3033716 Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red     Plug-in bridge - FBS 2-6 BU - 3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 3-6 BU - 3036945 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue     11/07/2019   Page 13 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories Plug-in bridge - FBS 4-6 BU - 3036958 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-6 BU - 3036961 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue     Plug-in bridge - FBS 10-6 BU - 3032198 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue     Plug-in bridge - FBS 20-6 BU - 3032208 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue     Plug-in bridge - FBS 50-6 BU - 3032211 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue     Labeled terminal marker 11/07/2019   Page 14 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories Zack marker strip - ZB 5 CUS - 0824962 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017 Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020 Zack marker strip, white, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 5,LGS:L1-N,PE - 1050415 Zack marker strip, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10     11/07/2019   Page 15 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories Marker for terminal blocks - UC-TM 5 CUS - 0824581 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96     Marker for terminal blocks - UCT-TM 5 CUS - 0829595 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72     Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     11/07/2019   Page 16 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB 6,LGS:U-N - 1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     Marker pen 11/07/2019   Page 17 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Short-circuit connector Short-circuit connector - FBSRH 2-6 - 3033812 Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red     Switching jumper Feed-through connector - DMET 5X20 - 3032075 Feed-through metal in the shape of a 5 x 20 mm glass tube fuse insert for use in fuse terminal blocks.     Terminal marking 11/07/2019   Page 18 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 5 - 0818108 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96     Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72     Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     11/07/2019   Page 19 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     Test socket Test adapter - PAI-4-FIX-5/6 BU - 3035975 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 OG - 3035974 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 YE - 3035977 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 RD - 3035976 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     11/07/2019   Page 20 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories Test adapter - PAI-4-FIX-5/6 GN - 3035978 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BK - 3035980 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GY - 3035982 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 VT - 3035979 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BN - 3035981 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     11/07/2019   Page 21 / 22 https://www.phoenixcontact.com/us/products/3214322 Fuse modular terminal block - UT 4-PE/L/HESILED 60 (5X20) - 3214322 Accessories Test adapter - PAI-4-FIX-5/6 WH - 3035983 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 11/07/2019   Page 22 / 22