https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Ground modular terminal block, nom. voltage: 500 V, nominal current: 28 A, connection method: Screw
connection, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, length: 92.7 mm, width: 6.2 mm, color: gray,
mounting: NS 35/7,5, NS 35/15, nom. voltage: 500 V
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
50 STK
GTIN
GTIN
4046356895712
Weight per Piece (excluding packing)
31.590 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
3
Number of connections
5
Potentials
3
Nominal cross section
4 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Degree of pollution
3
04/03/2018 Page 1 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Technical data
General
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Maximum load current
36 A (with 6 mm² conductor cross section)
Nominal current IN
28 A
Nominal voltage UN
500 V
Maximum load current
20 A (with 6 mm² conductor connection)
Nominal current IN
20 A (with 4 mm² conductor cross section)
Nominal voltage UN
500 V
Open side panel
No
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
0.964 (m/s ) /Hz
Acceleration
0.58 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Dimensions
Width
6.2 mm
Length
92.7 mm
Height
60.1 mm
Height NS 35/7,5
61.7 mm
04/03/2018 Page 2 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Technical data
Dimensions
Height NS 35/15
69.2 mm
Connection data
Note
Please observe the current carrying capacity of the DIN rails.
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1/IEC 60947-7-2
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
10
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
6 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Stripping length
9 mm
Internal cylindrical gage
A4
Screw thread
M3
Tightening torque, min
0.6 Nm
Tightening torque max
0.8 Nm
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
10
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
6 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Stripping length
9 mm
04/03/2018 Page 3 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Technical data
Connection data
Screw thread
M3
Tightening torque, min
0.6 Nm
Tightening torque max
0.8 Nm
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1/IEC 60947-7-2
IEC 60947-7-1
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 5.1
27141126
eCl@ss 6.0
27141120
eCl@ss 8.0
27141141
eCl@ss 9.0
27141141
ETIM
ETIM 4.0
EC000901
ETIM 5.0
EC000901
ETIM 6.0
EC000901
UNSPSC
UNSPSC 13.2
39121410
Approvals
Approvals
04/03/2018 Page 4 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Approvals
Approvals
cUL Recognized / UL Recognized / EAC / cULus Recognized
Ex Approvals
IECEx / UL Recognized / cUL Recognized / ATEX / cULus Recognized
Approval details
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
D
mm²/AWG/kcmil
26-10
26-10
26-10
Nominal current IN
16 A
16 A
Nominal voltage UN
300 V
300 V
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
D
mm²/AWG/kcmil
26-10
26-10
26-10
Nominal current IN
16 A
16 A
Nominal voltage UN
300 V
300 V
EAC
cULus Recognized
FILE E 60425
FILE E 60425
RU CDE.A*30.B.01742
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
Bridge
04/03/2018 Page 5 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
Connection pin - VS - 3004207
Connection pin, length: 1000 mm, color: gray
Feed-through connector - P-FIX - 3038956
Feed-through connector, length: 10.5 mm, width: 4 mm, color: gray
Component plug terminal block
Component connector - P-CO - 3036796
Component connector, for installing components that can be individually selected, nominal current: 6 A, pitch: 5.2 mm,
length: 24.2 mm, width: 5.1 mm, height: 33.3 mm, number of positions: 1, color: gray
Component connector - P-CO XL-UT - 3036799
Component connector, for installing components that can be individually selected up to a diameter of 10 mm and
power dissipation of up to 1 W, nominal current: 10 A, length: 41.2 mm, width: 12.3 mm, height: 37.5 mm, number of
positions: 1, color: gray
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
04/03/2018 Page 6 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
04/03/2018 Page 7 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
04/03/2018 Page 8 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
04/03/2018 Page 9 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, in acc. with EN 60715: 2001,
material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
04/03/2018 Page 10 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
Fuse
Fuse plug - P-FU 5X20 - 3036806
Fuse plug, fuse type: Glass / ceramics / ..., connection method: Plug connection, nominal current: 6.3 A, nom.
voltage: 500 V, width: 6.2 mm, fuse type: G / 5 x 20, mounting type: Plug-in mounting, color: black
Fuse plug - P-FU 5X20 LED 24-EX - 3036821
Fuse plug, fuse type: Sand filled, nominal current: 6.3 A, width: 6.2 mm, fuse type: G / 5 x 20, color: black
Fuse plug - P-FU 5X20 LED 24 - 3036819
Fuse plug, fuse type: Glass / ceramics / ..., nominal current: 6.3 A, width: 6.2 mm, fuse type: G / 5 x 20, mounting
type: Plug-in mounting, color: black
Fuse plug - P-FU 5X20 LED 60 - 3036822
Fuse plug, fuse type: Glass / ceramics / ..., nominal current: 6.3 A, width: 6.2 mm, fuse type: G / 5 x 20, mounting
type: Plug-in mounting, color: black
04/03/2018 Page 11 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
Fuse plug - P-FU 5X20 LA 250 - 3036835
Fuse plug, fuse type: Glass / ceramics / ..., nominal current: 6.3 A, width: 6.2 mm, fuse type: G / 5 x 20, mounting
type: Plug-in mounting, color: black
Jumper
Plug-in bridge - FBS 2-6 - 3030336
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-6 - 3030242
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red
Plug-in bridge - FBS 4-6 - 3030255
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-6 - 3030349
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red
04/03/2018 Page 12 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
Plug-in bridge - FBS 6-6 - 1008238
Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red
Plug-in bridge - FBS 10-6 - 3030271
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red
Plug-in bridge - FBS 20-6 - 3030365
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red
Plug-in bridge - FBS 50-6 - 3032224
Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red
Plug-in bridge - FBSR 2-6 - 3033715
Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red
04/03/2018 Page 13 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
Plug-in bridge - FBSR 3-6 - 3001594
Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red
Plug-in bridge - FBSR 4-6 - 3001595
Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red
Plug-in bridge - FBSR 5-6 - 3001596
Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red
Plug-in bridge - FBSR 10-6 - 3033716
Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red
Plug-in bridge - FBS 2-6 BU - 3036932
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue
04/03/2018 Page 14 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
Plug-in bridge - FBS 3-6 BU - 3036945
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue
Plug-in bridge - FBS 4-6 BU - 3036958
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-6 BU - 3036961
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 10-6 BU - 3032198
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue
Plug-in bridge - FBS 20-6 BU - 3032208
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue
04/03/2018 Page 15 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
Plug-in bridge - FBS 50-6 BU - 3032211
Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue
Knife
Isolating plugs - P-DI - 3036783
Isolating plugs, length: 10.8 mm, width: 3.5 mm, height: 23.1 mm, color: orange
Labeled terminal marker
Zack Marker strip, flat - ZBF 6 CUS - 0825027
Zack Marker strip, flat, Strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm
Marker for terminal blocks - UC-TMF 6 CUS - 0824646
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 6 CUS - 0829665
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.4 x 4.7 mm
04/03/2018 Page 16 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
Zack Marker strip, flat - ZBF 6,LGS:FORTL.ZAHLEN - 0808749
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100,
mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm
Zack Marker strip, flat - ZBF 6,QR:FORTL.ZAHLEN - 0808765
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100,
mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm
Zack Marker strip, flat - ZBF 6,LGS:GERADE ZAHLEN - 0810834
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 - 20, 22 - 40, etc. up to 82 - 100,
mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm
Zack Marker strip, flat - ZBF 6,LGS:UNGERADE ZAHLEN - 0810876
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
04/03/2018 Page 17 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Short-circuit connector
Short-circuit connector - FBSRH 2-6 - 3033812
Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red
Terminal marking
Zack Marker strip, flat - ZBF 6:UNBEDRUCKT - 0808710
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm
Marker for terminal blocks - UC-TMF 6 - 0818140
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field
size: 5.6 x 5.1 mm
04/03/2018 Page 18 / 19
https://www.phoenixcontact.com/us/products/3214365
Ground modular terminal block - UT 4-PE/L/TG - 3214365
Accessories
Marker for terminal blocks - UCT-TMF 6 - 0828746
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into flat marker groove, for
terminal block width: 6.2 mm, lettering field size: 5.4 x 4.7 mm
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
04/03/2018 Page 19 / 19
