3214368

https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Fuse modular terminal block, Connection method: Screw connection, Cross section: 0.14 mm²- 4 mm², AWG: 26 - 10, Nominal current: 30 A, Nominal voltage: 500 V, Width: 6.2 mm, Fuse type: G / 5 x 20, Fuse type: Glass / ceramics / ..., Mounting type: NS 35/7,5, NS 35/15, Color: black The figure shows the standard item without light indicator Key Commercial Data Packing unit 1 STK Minimum order quantity 50 STK Weight per Piece (excluding packing) 33.200 g Custom tariff number 85369085 Country of origin Poland Technical data Environmental Product Compliance China RoHS Hazardous substances above threshold values; Environmentally Friendly Use Period = 50; For details go to tab “Downloads”, Category “Manufacturer's declaration” General Note The current is determined by the fuse used, the voltage by the selected LED. If the fuse is faulty, the downstream circuit will not be disconnected. Number of levels 2 Number of connections 4 Nominal cross section 4 mm² Color black Insulating material PA 09/01/2016   Page 1 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Technical data General Flammability rating according to UL 94 V0 Fuse G / 5 x 20 Fuse type Glass / ceramics / ... Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation max. 1.6 W (With single arrangement of the fuse terminal block in the event of overload) LED voltage range 110 V AC ... 250 V AC LED current range 0.41 mA ... 0.96 mA Connection in acc. with standard IEC 60947-7-2/IEC 60947-7-3 Maximum load current 36 A (the current is determined by the fuse used) Nominal current IN 30 A Nominal voltage UN 500 V Connection in acc. with standard IEC 60947-7-2/IEC 60947-7-3 Maximum load current (upper level) 6.3 A (the current is determined by the fuse used) Nominal current IN (upper level) 6.3 A Nominal voltage UN 250 V Open side panel No Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions 09/01/2016   Page 2 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Technical data Dimensions Width 6.2 mm Length 92.7 mm Height NS 35/7,5 88.9 mm Height NS 35/15 96.4 mm Connection data Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, max. Connection method Screw connection Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard IEC 60947-7-2/IEC 60947-7-3 IEC 60947-7-2/IEC 60947-7-3 Flammability rating according to UL 94 V0 09/01/2016   Page 3 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Drawings Circuit diagram Application drawing Fuse terminal blocks in interconne arrangeme block consisting of 5 fuse terminal blocks Application drawing Fuse terminal block in single arrangement, block consisting of one fuse terminal block and 4 feedthrough terminal blocks Classifications eCl@ss eCl@ss 5.1 27141116 eCl@ss 6.0 27141116 eCl@ss 8.0 27141116 eCl@ss 9.0 27141116 09/01/2016   Page 4 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Classifications ETIM ETIM 4.0 EC000899 ETIM 5.0 EC000899 Approvals Approvals Approvals UL Recognized / cUL Recognized / CSA / cULus Recognized Ex Approvals Approval details UL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425   B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 16 A 16 A Nominal voltage UN 300 V 300 V cUL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425   B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 16 A 16 A Nominal voltage UN 300 V 300 V CSA   http://www.csagroup.org/us/en/services/testing-and-certification/certified-product-listing 13631   B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 16 A 16 A 09/01/2016   Page 5 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Approvals   B C Nominal voltage UN 300 V 300 V cULus Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm Accessories Accessories Bridge Connection pin - VS - 3004207 Connection pin, Length: 1000 mm, Color: gray     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     09/01/2016   Page 6 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     09/01/2016   Page 7 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35)     09/01/2016   Page 8 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m     09/01/2016   Page 9 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     09/01/2016   Page 10 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 10.7 mm, Number of positions: 2, Color: red     Plug-in bridge - FBS 3-6 - 3030242 Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 16.9 mm, Number of positions: 3, Color: red     Plug-in bridge - FBS 4-6 - 3030255 Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 23.1 mm, Number of positions: 4, Color: red     Plug-in bridge - FBS 5-6 - 3030349 Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 29.3 mm, Number of positions: 5, Color: red     Plug-in bridge - FBS 10-6 - 3030271 Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 60.3 mm, Number of positions: 10, Color: red     09/01/2016   Page 11 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories Plug-in bridge - FBS 20-6 - 3030365 Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 122.3 mm, Number of positions: 20, Color: red     Plug-in bridge - FBSR 2-6 - 3033715 Plug-in bridge, Pitch: 6.2 mm, Number of positions: 2, Color: red     Plug-in bridge - FBSR 3-6 - 3001594 Plug-in bridge, Pitch: 6.2 mm, Number of positions: 3, Color: red     Plug-in bridge - FBSR 4-6 - 3001595 Plug-in bridge, Pitch: 6.2 mm, Number of positions: 4, Color: red     Plug-in bridge - FBSR 5-6 - 3001596 Plug-in bridge, Pitch: 6.2 mm, Number of positions: 5, Color: red     09/01/2016   Page 12 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories Plug-in bridge - FBSR 10-6 - 3033716 Plug-in bridge, Pitch: 6.2 mm, Number of positions: 10, Color: red     Labeled terminal marker Zack marker strip - ZB 5 CUS - 0824962 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm     Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017 Zack marker strip, Strip, white, labeled, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm     Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020 Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm     Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033 Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Identical numbers 1 or 2, etc. up to 100, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm     09/01/2016   Page 13 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories Marker for terminal blocks - ZB 5,LGS:L1-N,PE - 1050415 Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm     Marker for terminal blocks - UC-TM 5 CUS - 0824581 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 CUS - 0829595 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, Lettering field: 4.6 x 10.5 mm     Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     09/01/2016   Page 14 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029 Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032 Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Identical numbers 1 or 2, etc. up to 100, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - ZB 6,LGS:U-N - 1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: U, V, W, N, GND, U, V, W, N, GND, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     09/01/2016   Page 15 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Switching jumper Feed-through connector - DMET 5X20 - 3032075 Feed-through metal in the shape of a 5 x 20 mm glass tube fuse insert for use in fuse terminal blocks.     Terminal marking 09/01/2016   Page 16 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm     Marker for terminal blocks - UC-TM 5 - 0818108 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 4.6 x 10.5 mm     Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     09/01/2016   Page 17 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Test socket Test adapter - PAI-4-FIX-5/6 BU - 3035975 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 OG - 3035974 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 YE - 3035977 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 RD - 3035976 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     09/01/2016   Page 18 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories Test adapter - PAI-4-FIX-5/6 GN - 3035978 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BK - 3035980 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GY - 3035982 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 VT - 3035979 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BN - 3035981 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     09/01/2016   Page 19 / 20 https://www.phoenixcontact.com/us/products/3214368 Fuse modular terminal block - UT 4-L/HESILA 250 (5X20) - 3214368 Accessories Test adapter - PAI-4-FIX-5/6 WH - 3035983 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 09/01/2016   Page 20 / 20