3214547

https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, nom. voltage: 500 V, nominal current: 17.5 A, connection method: Push-in connection, number of connections: 2, cross section:0.14 mm² - 1.5 mm², AWG: 26 - 14, width: 3.5 mm, height: 37 mm, color: gray, mounting type: NS 35/7,5, NS 35/15 Key Commercial Data Packing unit 1 STK Minimum order quantity 50 STK GTIN GTIN 4046356616287 Weight per Piece (excluding packing) 4.400 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 1.5 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 03/11/2018   Page 1 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Technical data General Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 0.56 W Maximum load current 17.5 A Nominal current IN 17.5 A Nominal voltage UN 500 V Open side panel Yes Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 7.3 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 1.5 mm² / 0.4 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 1.5 mm² Tractive force setpoint 40 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 1.5 mm² Short-time current 0.18 kA Result of thermal test Test passed Ageing test for screwless modular terminal block temperature cycles 192 03/11/2018   Page 2 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Technical data General Proof of thermal characteristics (needle flame) effective duration 30 s Result of aging test Test passed Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 1.857 (m/s ) /Hz Acceleration 0,8 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 3.5 mm End cover width 2.2 mm 03/11/2018   Page 3 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Technical data Dimensions Length 50.7 mm Height 37 mm Height NS 35/7,5 38.5 mm Height NS 35/15 46 mm Connection data Connection method Push-in connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 14 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1.5 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 14 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1 mm² Using the AI-S 1-8 TQ ferrule, Order No. 1200293, is recommended Stripping length 8 mm ... 10 mm Internal cylindrical gage A1 / B1 Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 03/11/2018   Page 4 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / LR / CSA / GL / NK / EAC / BV / EAC / cULus Recognized Ex Approvals IECEx / ATEX Approval details 03/11/2018   Page 5 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C D mm²/AWG/kcmil 26-14 26-14 26-14 Nominal current IN 15 A 15 A 5A Nominal voltage UN 300 V 300 V 600 V cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C D mm²/AWG/kcmil 26-14 26-14 26-14 Nominal current IN 15 A 15 A 5A Nominal voltage UN 300 V 300 V 600 V  FILE E 60425  FILE E 60425 LR    http://www.lr.org/en  12/20038 (E3) CSA    http://www.csagroup.org/services-industries/product-listing/  13631   B C D mm²/AWG/kcmil 26-14 26-14 26-14 Nominal current IN 15 A 15 A 5A Nominal voltage UN 300 V 300 V 600 V GL    http://exchange.dnv.com/tari/  2040111 HH NK    http://www.classnk.or.jp/hp/en/  14ME0912 03/11/2018   Page 6 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Approvals EAC      EAC-Zulassung BV    http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials  39980/A0 BV EAC      7500651.22.01.00246 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Crimping tool Crimping pliers - CRIMPFOX CENTRUS 6S - 1213144 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² to 6 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection     Crimping pliers - CRIMPFOX CENTRUS 10S - 1213154 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection     03/11/2018   Page 7 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Crimping pliers - CRIMPFOX CENTRUS 6H - 1213146 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² to 6 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection     Crimping pliers - CRIMPFOX CENTRUS 10H - 1213156 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection     Crimping pliers - CRIMPFOX 10S - 1212045 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 10 mm², unlockable pressure lock, lateral entry     Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry     Crimping pliers - CRIMPFOX 2,5-M - 1212719 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 2.5 mm², lateral entry, trapezoidal crimp     03/11/2018   Page 8 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Crimping pliers - CRIMPFOX 6-M - 1212720 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 6 - 1212034 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 6T - 1212037 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6 mm², lateral entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 6T-F - 1212038 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6 mm², front entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 6S-F - 1212043 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.5 mm² ... 6 mm², front entry, square crimp     03/11/2018   Page 9 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Crimping pliers - CRIMPFOX-M - 1212072 Basic pliers, for accommodating dies for a wide range of type of contacts     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     03/11/2018   Page 10 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     03/11/2018   Page 11 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     03/11/2018   Page 12 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     Documentation 03/11/2018   Page 13 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Mounting material - PT-IL - 3208090 Operating decal for the push-in Technology     End block End clamp - E/UK - 1201442 End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     03/11/2018   Page 14 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End cover End cover - D-PTS 1,5/S - 3214576 End cover, length: 50.5 mm, width: 2.2 mm, height: 30.8 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     03/11/2018   Page 15 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 3-3,5 BU - 3213099 Plug-in bridge, pitch: 3.5 mm, number of positions: 3, color: blue     03/11/2018   Page 16 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Plug-in bridge - FBS 4-3,5 BU - 3213109 Plug-in bridge, pitch: 3.5 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-3,5 BU - 3213112 Plug-in bridge, pitch: 3.5 mm, number of positions: 5, color: blue     Plug-in bridge - FBS 10-3,5 BU - 3213125 Plug-in bridge, pitch: 3.5 mm, number of positions: 10, color: blue     Plug-in bridge - FBS 20-3,5 BU - 3213138 Plug-in bridge, pitch: 3.5 mm, number of positions: 20, color: blue     Plug-in bridge - FBS 2-3,5 - 3213014 Plug-in bridge, pitch: 3.5 mm, number of positions: 2, color: red     03/11/2018   Page 17 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Plug-in bridge - FBS 3-3,5 - 3213027 Plug-in bridge, pitch: 3.5 mm, number of positions: 3, color: red     Plug-in bridge - FBS 4-3,5 - 3213030 Plug-in bridge, pitch: 3.5 mm, number of positions: 4, color: red     Plug-in bridge - FBS 5-3,5 - 3213043 Plug-in bridge, pitch: 3.5 mm, number of positions: 5, color: red     Plug-in bridge - FBS 10-3,5 - 3213056 Plug-in bridge, pitch: 3.5 mm, number of positions: 10, color: red     Plug-in bridge - FBS 20-3,5 - 3213069 Plug-in bridge, pitch: 3.5 mm, number of positions: 20, color: red     03/11/2018   Page 18 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Plug-in bridge - FBS 2-3,5 GY - 3213153 Plug-in bridge, pitch: 3.5 mm, number of positions: 2, color: gray     Plug-in bridge - FBS 2-3,5 BU - 3213086 Plug-in bridge, pitch: 3.5 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 3-3,5 GY - 3213167 Plug-in bridge, pitch: 3.5 mm, number of positions: 3, color: gray     Plug-in bridge - FBS 4-3,5 GY - 3213180 Plug-in bridge, pitch: 3.5 mm, number of positions: 4, color: gray     Plug-in bridge - FBS 5-3,5 GY - 3213183 Plug-in bridge, pitch: 3.5 mm, number of positions: 5, color: gray     03/11/2018   Page 19 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Plug-in bridge - FBS 10-3,5 GY - 3213196 Plug-in bridge, pitch: 3.5 mm, number of positions: 10, color: gray     Plug-in bridge - FBS 20-3,5 GY - 3213206 Plug-in bridge, pitch: 3.5 mm, number of positions: 20, color: gray     Labeled terminal marker Zack marker strip - ZB 3,5 CUS - 0829415 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 10.5 mm     Zack marker strip - ZB 3,5,LGS:FORTL.ZAHLEN - 0801404 Zack marker strip, Strip, white, labeled, printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, mounting type: snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 10.5 mm     Zack marker strip - ZB 3,5,QR:FORT.ZAHLEN - 0801405 Zack marker strip, Strip, white, labeled, Printed vertically: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, mounting type: snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 10.5 mm     03/11/2018   Page 20 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Marker for terminal blocks - UCT-TM 3,5 CUS - 0829581 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 2.95 x 10.5 mm     Zack Marker strip, flat - ZBF 3,5 CUS - 0829394 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 5.2 mm     Zack Marker strip, flat - ZBF 3,5,LGS:FORTL.ZAHLEN - 0801406 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 5.15 x 3.5 mm     Zack Marker strip, flat - ZBF 3,5,QR:FORTL.ZAHLEN - 0801407 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 5.15 x 3.5 mm     Marker for terminal blocks - UCT-TMF 3,5 CUS - 0829644 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 2.7 x 4.7 mm     Marker carriers 03/11/2018   Page 21 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Group marker label for terminal marking - GBS-ZB/26X6 - 0809298 Group marking label, snaps onto terminal center for screw, spring-cage and quick connection terminal blocks, labeled with ESL 26x6 mm or EST 25x6 mm, in the foot part with Zack marker strip, length: 29 mm     Partition plate Partition plate - ATP-ST 4 - 3030721 Partition plate, length: 59.8 mm, width: 2 mm, height: 39 mm, color: gray     Spacer plate - DP PS-3,5 - 3031011 Spacer plate, length: 15.9 mm, width: 3.5 mm, height: 33.5 mm, number of positions: 1, color: red     Planning and marking software Software - CLIP-PROJECT ADVANCED - 5146040 Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.     Software - CLIP-PROJECT PROFESSIONAL - 5146053 Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and labels for identifying terminal blocks, conductors and cables, and devices.     03/11/2018   Page 22 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Reducing bridge Reducing bridge - RB ST (2,5/4)-1,5/S - 3214356 Reducing bridge, pitch: 6.7 mm, length: 22.7 mm, width: 10.4 mm, number of positions: 2, color: red     Reducing bridge - RB ST 6-1,5/S - 3213250 Reducing bridge, pitch: 8 mm, length: 29.9 mm, width: 12.9 mm, number of positions: 2, color: red     Screwdriver tools Screwdriver - SZF 0-0,4X2,5 - 1204504 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2component grip, with non-slip grip     Actuation tool - ST-BW 0 - 1200135 Actuation tool, for all 1.5 mm² spring cages from PT 1,5/S and FT 1,5/S     Terminal marking 03/11/2018   Page 23 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Zack marker strip - ZB 3,5:UNBEDRUCKT - 0829414 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 10.5 mm     Marker for terminal blocks - UCT-TM 3,5 - 0829484 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 2.95 x 10.5 mm     Zack Marker strip, flat - ZBF 3,5:UNBEDRUCKT - 0829392 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 5.2 mm     Marker for terminal blocks - UCT-TMF 3,5 - 0829486 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 2.7 x 4.7 mm     Marker for terminal blocks - TMT (EX9,5)R - 0828295 Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: snap into universal marker groove, snap into tall marker groove, for terminal block width: 50000 mm, lettering field size: 9.5 x 50000 mm     03/11/2018   Page 24 / 25 https://www.phoenixcontact.com/us/products/3214547 Feed-through terminal block - PTS 1,5/S - 3214547 Accessories Marker for terminal blocks - US-TM 100 - 0829255 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting type: snap into universal marker groove, for terminal block width: 104 mm, lettering field size: 104 x 9.8 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver     Test plugs - PS-3,5 - 3031010 Test plugs, color: red     Test plugs - PS-3,5/E - 3031012 Test plugs, color: red     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 03/11/2018   Page 25 / 25