https://www.phoenixcontact.com/us/products/3214945
Test disconnect terminal block - RBO 5-T-F-B - 3214945
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block with bolt connection, cross section: 0.1 - 6 mm², AWG: 26 - 10, width 16.3 mm, color:
Gray
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356605854
Weight per Piece (excluding packing)
28.800 g
Custom tariff number
85369010
Country of origin
India
Technical data
General
Number of levels
1
Number of connections
2
Potentials
1
Nominal cross section
10 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
08/25/2019 Page 1 / 12
https://www.phoenixcontact.com/us/products/3214945
Test disconnect terminal block - RBO 5-T-F-B - 3214945
Technical data
General
Maximum power dissipation for nominal condition
1.82 W
Designation
Level 1 above 1 below 1
Maximum load current
57 A (with 10 mm² conductor cross section)
Nominal current IN
57 A
Nominal voltage UN
800 V
Open side panel
Yes
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
13 mm
End cover width
2.2 mm
Length
53.3 mm
Height
39.7 mm
Height NS 35/7,5
47.1 mm
Height NS 35/15
54.6 mm
Pitch
13 mm
Connection data
Note
Connection bolts
Connection
1 level
Connection method
Bolt connection
Screw thread
M5
Tightening torque, min
2 Nm
08/25/2019 Page 2 / 12
https://www.phoenixcontact.com/us/products/3214945
Test disconnect terminal block - RBO 5-T-F-B - 3214945
Technical data
Connection data
Tightening torque max
2.2 Nm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.1 mm²
Conductor cross section flexible max.
10 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
8
Cable lug connection according to standard
DIN 46234
Min. cross section for cable lug connection
0.1 mm²
Max. cross section for cable lug connection
10 mm²
Hole diameter, min.
5.3 mm
Cable lug width, max.
10 mm
Bolt diameter
5 mm
Cable lug connection according to standard
DIN 46237
Min. cross section for cable lug connection
0.5 mm²
Max. cross section for cable lug connection
6 mm²
Hole diameter, min.
5.3 mm
Cable lug width, max.
10 mm
Bolt diameter
5 mm
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Classifications
eCl@ss
eCl@ss 4.1
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141126
08/25/2019 Page 3 / 12
https://www.phoenixcontact.com/us/products/3214945
Test disconnect terminal block - RBO 5-T-F-B - 3214945
Classifications
eCl@ss
eCl@ss 8.0
27141126
eCl@ss 9.0
27141126
ETIM
ETIM 2.0
EC000902
ETIM 3.0
EC000902
ETIM 4.0
EC000902
ETIM 5.0
EC000902
ETIM 6.0
EC000902
ETIM 7.0
EC000902
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
EAC / EAC
Ex Approvals
Approval details
EAC
EAC-Zulassung
EAC
RU CDE.A*30.B.01742
08/25/2019 Page 4 / 12
https://www.phoenixcontact.com/us/products/3214945
Test disconnect terminal block - RBO 5-T-F-B - 3214945
Accessories
Accessories
Cover profile
Cover profile - AP RSC - 3058017
Cover profile, for covering terminal strips, directly snapped onto RBO... and RSC... terminal blocks. Length supplied: 1 m
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
08/25/2019 Page 5 / 12
https://www.phoenixcontact.com/us/products/3214945
Test disconnect terminal block - RBO 5-T-F-B - 3214945
Accessories
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
08/25/2019 Page 6 / 12
https://www.phoenixcontact.com/us/products/3214945
Test disconnect terminal block - RBO 5-T-F-B - 3214945
Accessories
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
08/25/2019 Page 7 / 12
https://www.phoenixcontact.com/us/products/3214945
Test disconnect terminal block - RBO 5-T-F-B - 3214945
Accessories
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
08/25/2019 Page 8 / 12
https://www.phoenixcontact.com/us/products/3214945
Test disconnect terminal block - RBO 5-T-F-B - 3214945
Accessories
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
08/25/2019 Page 9 / 12
https://www.phoenixcontact.com/us/products/3214945
Test disconnect terminal block - RBO 5-T-F-B - 3214945
Accessories
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-RSC 5 - 3058020
End cover, length: 53.3 mm, width: 2.2 mm, height: 37 mm, color: gray
Labeled terminal marker
Zack marker strip - ZB 13 CUS - 0829132
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 13 mm, lettering field size: 13 x 10.5 mm
Zack Marker strip, flat - ZBF 13 CUS - 0829134
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 13 mm, lettering field size: 13 x 5.2 mm
Partition plate
08/25/2019 Page 10 / 12
https://www.phoenixcontact.com/us/products/3214945
Test disconnect terminal block - RBO 5-T-F-B - 3214945
Accessories
Separating plate - TS-KK 3 - 2770215
Separating plate, length: 14 mm, width: 0.5 mm, height: 16 mm, color: gray
Separating plate - TS-UT 6-T/SP - 3072821
Separating plate, length: 105.2 mm, width: 1 mm, height: 67.5 mm, color: gray
Screw bridge
Fixed bridge - FB 10-13 - 3059126
Fixed bridge, pitch: 13 mm, number of positions: 10, color: silver
Fixed bridge - FB 10-13 ISO - 3059663
Fixed bridge, pitch: 13 mm, number of positions: 10, color: silver
Screwdriver tools
Screwdriver - SZK PH2 VDE - 1205163
Screwdriver, PH crosshead, VDE insulated, size: PH 2 x 100 mm, 2-component grip, with non-slip grip
08/25/2019 Page 11 / 12
https://www.phoenixcontact.com/us/products/3214945
Test disconnect terminal block - RBO 5-T-F-B - 3214945
Accessories
Screwdriver - SZS 1,2X8,0 VDE - 1205082
Screwdriver, slot-headed, VDE insulated, size: 1.2 x 8.0 x 175 mm, 2-component grip, with non-slip grip
Short-circuit connector
Short circuit kit for current transformers - CARRIER F-13 KIT - 3215070
Short-circuit kit for current transformer. Use with panel mounted RBO/RSC 5 feed-through terminals
Terminal marking
Zack marker strip - ZB 13:UNBEDRUCKT - 0829131
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 13 mm, lettering field size: 13 x 10.5 mm
Zack Marker strip, flat - ZBF 13:UNBEDRUCKT - 0829133
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 13 mm, lettering field size: 13 x 5.2 mm
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
08/25/2019 Page 12 / 12
