https://www.phoenixcontact.com/us/products/3215915
Ground modular terminal block - UT 16-PE/S - 3215915
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Ground modular terminal block, with screwfix, Connection method: Screw connection, Cross section: 1.5
mm² - 25 mm², AWG: 16 - 4, Width: 12.2 mm, Color: green-yellow, Mounting type: NS 35/7,5, NS 35/15
The figure shows a similar product
Key Commercial Data
Packing unit
1 STK
Weight per Piece (excluding packing)
56.400 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
1
Number of connections
2
Potentials
1
Nominal cross section
16 mm²
Color
green-yellow
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Open side panel
Yes
Terminal block mounting
1.5 Nm ... 1.8 Nm (PE foot with mounting screw, M4)
Oscillation, broadband noise test result
Test passed
09/01/2016 Page 1 / 12
https://www.phoenixcontact.com/us/products/3215915
Ground modular terminal block - UT 16-PE/S - 3215915
Technical data
General
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s ) /Hz
Acceleration
0,8 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
12.2 mm
End cover width
2.2 mm
Length
55.5 mm
Height NS 35/7,5
55 mm
Height NS 35/15
62.5 mm
09/01/2016 Page 2 / 12
https://www.phoenixcontact.com/us/products/3215915
Ground modular terminal block - UT 16-PE/S - 3215915
Technical data
Connection data
Note
Please observe the current carrying capacity of the DIN rails.
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-2
Conductor cross section solid min.
1.5 mm²
Conductor cross section solid max.
25 mm²
Conductor cross section AWG min.
16
Conductor cross section AWG max.
4
Conductor cross section flexible min.
1.5 mm²
Conductor cross section flexible max.
25 mm²
Min. AWG conductor cross section, flexible
16
Max. AWG conductor cross section, flexible
4
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
2 conductors with same cross section, solid min.
1 mm²
2 conductors with same cross section, solid max.
6 mm²
2 conductors with same cross section, stranded min.
1 mm²
2 conductors with same cross section, stranded max.
6 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.75 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
10 mm²
sleeve, max.
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
1 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
6 mm²
Stripping length
14 mm
Internal cylindrical gage
A7
Screw thread
M5
Tightening torque, min
2.5 Nm
Tightening torque max
3 Nm
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-2
Flammability rating according to UL 94
V0
Drawings
09/01/2016 Page 3 / 12
https://www.phoenixcontact.com/us/products/3215915
Ground modular terminal block - UT 16-PE/S - 3215915
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141118
eCl@ss 4.1
27141118
eCl@ss 5.0
27141118
eCl@ss 5.1
27141118
eCl@ss 6.0
27141141
eCl@ss 7.0
27141141
eCl@ss 8.0
27141141
eCl@ss 9.0
27141141
ETIM
ETIM 2.0
EC000901
ETIM 3.0
EC000901
ETIM 4.0
EC000901
ETIM 5.0
EC000901
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
EAC / EAC / UL Recognized / cUL Recognized / cULus Recognized
Ex Approvals
Approval details
09/01/2016 Page 4 / 12
https://www.phoenixcontact.com/us/products/3215915
Ground modular terminal block - UT 16-PE/S - 3215915
Approvals
EAC EAC-Zulassung
EAC 7500651.22.01.00246
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B
C
mm²/AWG/kcmil
16-4
16-4
Nominal voltage UN
600 V
600 V
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B
C
mm²/AWG/kcmil
16-4
16-4
Nominal voltage UN
600 V
600 V
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
09/01/2016 Page 5 / 12
https://www.phoenixcontact.com/us/products/3215915
Ground modular terminal block - UT 16-PE/S - 3215915
Accessories
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
09/01/2016 Page 6 / 12
https://www.phoenixcontact.com/us/products/3215915
Ground modular terminal block - UT 16-PE/S - 3215915
Accessories
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
09/01/2016 Page 7 / 12
https://www.phoenixcontact.com/us/products/3215915
Ground modular terminal block - UT 16-PE/S - 3215915
Accessories
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
09/01/2016 Page 8 / 12
https://www.phoenixcontact.com/us/products/3215915
Ground modular terminal block - UT 16-PE/S - 3215915
Accessories
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
End cover
End cover - D-UT 16 - 3047206
End cover, Length: 52.8 mm, Width: 2.2 mm, Height: 47.3 mm, Color: gray
Labeled terminal marker
Zack marker strip - ZB 12 CUS - 0824942
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into
tall marker groove, for terminal block width: 12.2 mm, Lettering field: 10.5 x 12.15 mm
09/01/2016 Page 9 / 12
https://www.phoenixcontact.com/us/products/3215915
Ground modular terminal block - UT 16-PE/S - 3215915
Accessories
Marker for terminal blocks - ZB 12,LGS:L1-N,PE - 0812146
Marker for terminal blocks, Strip, white, labeled, Printed horizontally: L1, L2, L3, N, PE, Mounting type: Snap into tall
marker groove, for terminal block width: 12.2 mm, Lettering field: 10.5 x 12.15 mm
Marker for terminal blocks - UC-TM 12 CUS - 0824613
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 12 mm, Lettering field: 11.45 x 10.5 mm
Marker for terminal blocks - UCT-TM 12 CUS - 0829630
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 12 mm, Lettering field: 10.8 x 9.6 mm
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Partition plate
09/01/2016 Page 10 / 12
https://www.phoenixcontact.com/us/products/3215915
Ground modular terminal block - UT 16-PE/S - 3215915
Accessories
Partition plate - TPNS-UK - 0706647
Partition plate, Length: 80 mm, Width: 2 mm, Height: 70 mm, Color: gray
Planning and marking software
Software - CLIP-PROJECT ADVANCED - 5146040
Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.
Software - CLIP-PROJECT PROFESSIONAL - 5146053
Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and
labels for identifying terminal blocks, conductors and cables, and devices.
Terminal marking
Zack marker strip - ZB 12:UNPRINTED - 0812120
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 12.2 mm, Lettering field: 12 x 10.5 mm
Marker for terminal blocks - UC-TM 12 - 0819194
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, for terminal block width: 12 mm, Lettering field: 11.45 x 10.5 mm
09/01/2016 Page 11 / 12
https://www.phoenixcontact.com/us/products/3215915
Ground modular terminal block - UT 16-PE/S - 3215915
Accessories
Marker for terminal blocks - UCT-TM 12 - 0829144
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal
block width: 12 mm, Lettering field: 10.8 x 9.6 mm
Warning label printed
Warning label - WS UT 16 - 3047374
Warning sign for UT terminal blocks
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
09/01/2016 Page 12 / 12
