https://www.phoenixcontact.com/us/products/3215928
Ground modular terminal block - UT 35-PE/S - 3215928
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Ground modular terminal block, with screwfix, connection method: Screw connection, number of connections: 2,
cross section: 1.5 mm² - 35 mm², AWG: 16 - 2, width: 16 mm, color: green-yellow, mounting type: NS 35/7,5, NS
35/15
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356595810
Weight per Piece (excluding packing)
86.667 g
Custom tariff number
85369010
Country of origin
China
Technical data
General
Number of levels
1
Number of connections
2
Nominal cross section
35 mm²
Color
green-yellow
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Designation
Level 1 above 1 below 1
08/14/2019 Page 1 / 11
https://www.phoenixcontact.com/us/products/3215928
Ground modular terminal block - UT 35-PE/S - 3215928
Technical data
General
Open side panel
No
Terminal block mounting
2.5 Nm ... 3 Nm (PE foot with mounting screw, M5)
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s ) /Hz
Acceleration
0,8 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Dimensions
Width
16 mm
End cover width
2.2 mm
Length
60.2 mm
Height NS 35/7,5
65.7 mm
Height NS 35/15
73.2 mm
Connection data
Note
Please observe the current carrying capacity of the DIN rails.
Connection method
Screw connection
Screw thread
M6
Stripping length
18 mm
Tightening torque, min
3.2 Nm
Tightening torque max
3.7 Nm
Connection in acc. with standard
IEC 60947-7-2
Note
Note: Product releases, connection cross sections and notes on
connecting aluminum cables can be found in the download area.
08/14/2019 Page 2 / 11
https://www.phoenixcontact.com/us/products/3215928
Ground modular terminal block - UT 35-PE/S - 3215928
Technical data
Connection data
Conductor cross section solid min.
1.5 mm²
Conductor cross section solid max.
35 mm²
Conductor cross section AWG min.
16
Conductor cross section AWG max.
2
Conductor cross section flexible min.
1.5 mm²
Conductor cross section flexible max.
35 mm²
Min. AWG conductor cross section, flexible
16
Max. AWG conductor cross section, flexible
2
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
Internal cylindrical gage
B9
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-2
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Classifications
eCl@ss
eCl@ss 4.0
27141118
eCl@ss 4.1
27141118
eCl@ss 5.0
27141118
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141141
eCl@ss 8.0
27141141
eCl@ss 9.0
27141141
ETIM
ETIM 2.0
EC000901
ETIM 3.0
EC000901
ETIM 4.0
EC000901
08/14/2019 Page 3 / 11
https://www.phoenixcontact.com/us/products/3215928
Ground modular terminal block - UT 35-PE/S - 3215928
Classifications
ETIM
ETIM 5.0
EC000901
ETIM 6.0
EC000901
ETIM 7.0
EC000901
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / EAC / RS / cULus Recognized
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
600 V
600 V
mm²/AWG/kcmil
16-2
16-2
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
600 V
600 V
mm²/AWG/kcmil
16-2
16-2
FILE E 60425
FILE E 60425
08/14/2019 Page 4 / 11
https://www.phoenixcontact.com/us/products/3215928
Ground modular terminal block - UT 35-PE/S - 3215928
Approvals
RU CDE.A*30.B.01742
RS
http://www.rs-head.spb.ru/en/index.php
17.00013.272
cULus Recognized
EAC
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
08/14/2019 Page 5 / 11
https://www.phoenixcontact.com/us/products/3215928
Ground modular terminal block - UT 35-PE/S - 3215928
Accessories
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
08/14/2019 Page 6 / 11
https://www.phoenixcontact.com/us/products/3215928
Ground modular terminal block - UT 35-PE/S - 3215928
Accessories
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
08/14/2019 Page 7 / 11
https://www.phoenixcontact.com/us/products/3215928
Ground modular terminal block - UT 35-PE/S - 3215928
Accessories
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
08/14/2019 Page 8 / 11
https://www.phoenixcontact.com/us/products/3215928
Ground modular terminal block - UT 35-PE/S - 3215928
Accessories
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - E/AL-NS 35 - 1201662
End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm,
color: aluminum
Labeled terminal marker
Zack marker strip - ZB 16 CUS - 0827463
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 16 mm, lettering field size: 10.5 x 16 mm
Zack marker strip - ZB 16,LGS:L1-N,PE - 0827462
Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker
groove, for terminal block width: 16.3 mm, lettering field size: 10.5 x 16.25 mm
Marker for terminal blocks - UC-TM 16 CUS - 0824621
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm
08/14/2019 Page 9 / 11
https://www.phoenixcontact.com/us/products/3215928
Ground modular terminal block - UT 35-PE/S - 3215928
Accessories
Marker for terminal blocks - UCT-TM 16 CUS - 0829637
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 14.8 x 9.6 mm
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Partition plate
Partition plate - TPNS-UK - 0706647
Partition plate, length: 80 mm, width: 2 mm, height: 70 mm, color: gray
Terminal marking
Zack marker strip - ZB 16:UNPRINTED - 0827461
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 16 mm, lettering field size: 16 x 10.5 mm
08/14/2019 Page 10 / 11
https://www.phoenixcontact.com/us/products/3215928
Ground modular terminal block - UT 35-PE/S - 3215928
Accessories
Marker for terminal blocks - UC-TM 16 - 0819217
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 16 mm, lettering field size: 15.45 x 10.5 mm
Marker for terminal blocks - UCT-TM 16 - 0829146
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size:
14.8 x 9.6 mm
Warning label printed
Warning label - WS UT 35 - 3047387
Warning sign for UT terminal blocks
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
08/14/2019 Page 11 / 11
