3244517

https://www.phoenixcontact.com/us/products/3244517 Sensor/actuator terminal block - PTIO 1,5/S/4-LED 24 RD - 3244517 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator terminal block, Connection method: Push-in connection, Cross section: 0.14 mm² - 1.5 mm², AWG: 26 - 14, Width: 3.5 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Product Features  The push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors  The compact design and front connection enable wiring in a confined space  In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection Key commercial data Packing unit 1 pc Minimum order quantity 50 pc Weight per Piece (excluding packing) 8.8 GRM Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 4 Number of connections 5 Color gray Insulating material PA Inflammability class according to UL 94 V0 Maximum load current 13.5 A Rated surge voltage 4 kV Pollution degree 3 Surge voltage category III Insulating material group I 1/30/14   Page 1 / 5 https://www.phoenixcontact.com/us/products/3244517 Sensor/actuator terminal block - PTIO 1,5/S/4-LED 24 RD - 3244517 Technical data General Connection in acc. with standard IEC 60947-7-1 Nominal current IN 13.5 A Nominal voltage UN 250 V Open side panel ja Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Surge voltage test setpoint 4.8 kV Result of surge voltage test Test passed Power frequency withstand voltage setpoint 1.5 kV Result of power-frequency withstand voltage test Test passed Checking the mechanical stability of terminal points (5 x conductor connection) Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 1.5 mm² / 0.4 kg Result of bending test Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 1.5 mm² Tractive force setpoint 40 N Tensile test result Test passed Tight fit on carrier NS 35 Setpoint 1N Result of tight fit test Test passed Requirements, voltage drop ≤ 3.2 mV Result of voltage drop test Test passed Temperature-rise test Test passed Conductor cross section short circuit testing 1.5 mm² Short-time current 0.18 kA Short circuit stability result Test passed Ageing test for screwless modular terminal block temperature cycles 192 Result of aging test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Result of thermal test Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 1/30/14   Page 2 / 5 https://www.phoenixcontact.com/us/products/3244517 Sensor/actuator terminal block - PTIO 1,5/S/4-LED 24 RD - 3244517 Technical data General Test spectrum Service life test category 2, bogie mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Oscillation, broadband noise test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 30 g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Shock test result Test passed Temperature index, insulating material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C 2 2 Dimensions Width 3.5 mm Length 90.8 mm Height NS 35/7,5 41.5 mm Height NS 35/15 49 mm Connection data Connection in acc. with standard IEC 60947-7-1 Connection method Push-in connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 14 Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 1.5 mm² Min. AWG conductor cross section, stranded 26 Max. AWG conductor cross section, stranded 14 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 1 mm² 1/30/14   Page 3 / 5 https://www.phoenixcontact.com/us/products/3244517 Sensor/actuator terminal block - PTIO 1,5/S/4-LED 24 RD - 3244517 Technical data Connection data Stripping length 8 mm Internal cylindrical gage A1 / B1 Classifications eCl@ss eCl@ss 4.0 27141118 eCl@ss 4.1 27141118 eCl@ss 5.0 27141118 eCl@ss 5.1 27141118 eCl@ss 6.0 27141128 eCl@ss 7.0 27141128 eCl@ss 8.0 27141128 ETIM ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000900 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals GOST Ex Approvals Approvals submitted 1/30/14   Page 4 / 5 https://www.phoenixcontact.com/us/products/3244517 Sensor/actuator terminal block - PTIO 1,5/S/4-LED 24 RD - 3244517 Approvals Approval details GOST  Drawings Circuit diagram © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 1/30/14   Page 5 / 5