3247976

https://www.phoenixcontact.com/us/products/3247976 Bolt connection terminal block - RBO 10-HC - 3247976 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bolt connection terminal block, Connection method: Bolt connection, Number of positions: 1, Cross section: 6 mm² - 150 mm², AWG: 10 - 300, Width: 41 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15, ct screw connection Product Features ■ Tested for railway applications Key Commercial Data Packing unit 1 pc Minimum order quantity 5 pc Weight per Piece (excluding packing) 332.0 g Custom tariff number 85369010 Country of origin China Technical data General Number of levels 1 Number of connections 2 Nominal cross section 150 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Area of application Railway industry Mechanical engineering Plant engineering Rated surge voltage 8 kV Degree of pollution 3 03/14/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/3247976 Bolt connection terminal block - RBO 10-HC - 3247976 Technical data General Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Maximum load current 309 A (with 150 mm² conductor cross section) Nominal current IN 309 A Nominal voltage UN 1500 V Open side panel No Result of surge voltage test Test passed Surge voltage test setpoint 12 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 2.7 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 15 N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 150 mm² Short-time current 18 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 1.857 (m/s ) /Hz Acceleration 0.8g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms 2 2 03/14/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/3247976 Bolt connection terminal block - RBO 10-HC - 3247976 Technical data General Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Dimensions Width 41 mm Length 235 mm Height NS 35/7,5 77 mm Height NS 35/15 84.5 mm Connection data Note Connection bolts Connection method Bolt connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 6 mm² Conductor cross section solid max. 150 mm² Conductor cross section AWG min. 10 Conductor cross section AWG max. 300 Conductor cross section flexible min. 6 mm² Conductor cross section flexible max. 150 mm² Min. AWG conductor cross section, flexible 10 Max. AWG conductor cross section, flexible 300 Cable lug connection according to standard DIN 46 234 Min. cross section for cable lug connection 6 mm² Max. cross section for cable lug connection 150 mm² Hole diameter, min. 10.5 mm Cable lug width, max. 30 mm Bolt diameter 10 mm Screw thread M10 Tightening torque, min 10 Nm Tightening torque max 20 Nm Cable lug connection according to standard DIN 46,235 Min. cross section for cable lug connection 16 mm² Max. cross section for cable lug connection 150 mm² Hole diameter, min. 10.5 mm Cable lug width, max. 34 mm 03/14/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/3247976 Bolt connection terminal block - RBO 10-HC - 3247976 Technical data Connection data Bolt diameter 10 mm Screw thread M10 Tightening torque, min 10 Nm Tightening torque max 20 Nm Screw thread M10 Tightening torque, min 10 Nm Tightening torque max 20 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 DIN 46 234 DIN 46,235 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 03/14/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/3247976 Bolt connection terminal block - RBO 10-HC - 3247976 Approvals Approvals Approvals UL Recognized / CSA / EAC / EAC Ex Approvals IECEx / ATEX / EAC Ex Approvals submitted Approval details UL Recognized      B C mm²/AWG/kcmil 10-350 10-350 10-350 Nominal current IN 310 A 310 A 310 A Nominal voltage UN 1000 V 600 V 600 V CSA    B C mm²/AWG/kcmil 10-350 10-350 Nominal current IN 310 A 310 A Nominal voltage UN 600 V 1000 V EAC  EAC  Drawings 03/14/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/3247976 Bolt connection terminal block - RBO 10-HC - 3247976 Dimensional drawing 41 13 100 22 15,9 Ø 6,4 Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/14/2016   Page 6 / 6