https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Lever-type fuse terminal block, black, for 5 x 20 mm G fuse inserts, with LED for 24 V DC
Your advantages
An extremely compact design
Test connection on both sides in safety lever
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4046356585187
Weight per Piece (excluding packing)
17.600 g
Custom tariff number
85369095
Country of origin
Germany
Technical data
General
Note
The current is determined by the fuse used, the voltage by the selected
LED.
If the fuse is faulty, the downstream circuit will not be disconnected.
Number of levels
1
Number of connections
2
Nominal cross section
4 mm²
06/14/2020 Page 1 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Technical data
General
Color
black
Insulating material
PA
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.6 W
Fuse
G / 5 x 20
Fuse type
Glass / ceramics / ...
Rated surge voltage
4 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event
of overload)
max. 1.6 W (With interconnected arrangement of several fuse terminal
blocks in the event of overload)
max. 4 W (with single arrangement of the fuse terminal block in the event
of a short-circuit)
max. 2.5 W (With interconnected arrangement of several fuse terminal
blocks in the event of a short-circuit)
LED voltage range
12 V AC/DC ... 60 V AC/DC
LED current range
0.09 mA ... 0.49 mA
Connection in acc. with standard
IEC 60947-7-3
Maximum load current
6.3 A (the current is determined by the fuse used)
Nominal current IN
6.3 A
Nominal voltage UN
24 V
Open side panel
No
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
06/14/2020 Page 2 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Technical data
Dimensions
Width
6.2 mm
Length
57.8 mm
Height NS 35/7,5
73 mm
Height NS 35/15
80.5 mm
Ambient conditions
Ambient temperature (operation)
-60 °C ... 85 °C
Ambient temperature (storage/transport)
-25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
Connection data
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and
without plastic sleeve, minimum
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and
without plastic sleeve, maximum
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules,
with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules,
with plastic sleeve, maximum
2.5 mm²
Connection method
Screw connection
Stripping length
9 mm
Internal cylindrical gage
A4
06/14/2020 Page 3 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Technical data
Connection data
Screw thread
M3
Tightening torque, min
0.6 Nm
Tightening torque max
0.8 Nm
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-3
Flammability rating according to UL 94
V0
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Circuit diagram
06/14/2020 Page 4 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Classifications
eCl@ss
eCl@ss 10.0.1
27141116
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141116
eCl@ss 8.0
27141116
eCl@ss 9.0
27141116
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000899
ETIM 4.0
EC000899
ETIM 5.0
EC000899
ETIM 6.0
EC000899
ETIM 7.0
EC000899
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Approvals
Approvals
Approvals
EAC / PRS / EAC
06/14/2020 Page 5 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Approvals
Ex Approvals
Approval details
RU CDE.A*30.B.01742
PRS
http://www.prs.pl/
TE/2156/880590/17
EAC
RU CDE.BL08.B.00534
EAC
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
06/14/2020 Page 6 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
06/14/2020 Page 7 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
06/14/2020 Page 8 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
06/14/2020 Page 9 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
06/14/2020 Page 10 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
Jumper
Plug-in bridge - FBS 2-6 - 3030336
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-6 - 3030242
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red
Plug-in bridge - FBS 4-6 - 3030255
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-6 - 3030349
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red
06/14/2020 Page 11 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
Plug-in bridge - FBS 6-6 - 1008238
Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red
Plug-in bridge - FBS 10-6 - 3030271
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red
Plug-in bridge - FBS 20-6 - 3030365
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red
Plug-in bridge - FBS 50-6 - 3032224
Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red
Plug-in bridge - FBSR 2-6 - 3033715
Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red
06/14/2020 Page 12 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
Plug-in bridge - FBSR 3-6 - 3001594
Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red
Plug-in bridge - FBSR 4-6 - 3001595
Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red
Plug-in bridge - FBSR 5-6 - 3001596
Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red
Plug-in bridge - FBSR 10-6 - 3033716
Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red
Plug-in bridge - FBS 2-6 BU - 3036932
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue
06/14/2020 Page 13 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
Plug-in bridge - FBS 3-6 BU - 3036945
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue
Plug-in bridge - FBS 4-6 BU - 3036958
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-6 BU - 3036961
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 10-6 BU - 3032198
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue
Plug-in bridge - FBS 20-6 BU - 3032208
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue
06/14/2020 Page 14 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
Plug-in bridge - FBS 50-6 BU - 3032211
Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue
Labeled terminal marker
Zack marker strip - ZB 5 CUS - 0824962
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017
Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ...
500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm,
Number of individual labels: 10
Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020
Zack marker strip, white, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15
x 10.5 mm, Number of individual labels: 10
06/14/2020 Page 15 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
Zack marker strip - ZB 5,LGS:L1-N,PE - 1050415
Zack marker strip, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall
marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - UC-TM 5 CUS - 0824581
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual
labels: 96
Marker for terminal blocks - UCT-TM 5 CUS - 0829595
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual
labels: 72
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2
mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
06/14/2020 Page 16 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm,
lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15
x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x
10.5 mm, Number of individual labels: 10
Marker for terminal blocks - ZB 6,LGS:U-N - 1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W,
N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field
size: 6.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual
labels: 80
06/14/2020 Page 17 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual
labels: 60
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Short-circuit connector
Short-circuit connector - FBSRH 2-6 - 3033812
Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red
Switching jumper
06/14/2020 Page 18 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
Feed-through connector - DMET 5X20 - 3032075
Feed-through metal in the shape of a 5 x 20 mm glass tube fuse insert for use in fuse terminal blocks.
Terminal marking
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm, Number of individual labels:
10
Marker for terminal blocks - UC-TM 5 - 0818108
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96
Marker for terminal blocks - UCT-TM 5 - 0828734
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size:
4.6 x 10.5 mm, Number of individual labels: 72
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels:
10
06/14/2020 Page 19 / 20
https://www.phoenixcontact.com/us/products/3248005
Fuse modular terminal block - UT 4-HESILED 24 (5X20)
120KOHM - 3248005
Accessories
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size:
5.6 x 10.5 mm, Number of individual labels: 60
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
06/14/2020 Page 20 / 20
