3248168

https://www.phoenixcontact.com/us/products/3248168 Micro feed-through terminal block - MP 10X1,5 - 3248168 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Micro feed-through terminal block, internally jumpered, nom. voltage: 500 V, nominal current: 17.5 A, connection method: Push-in connection, number of connections: 10, cross section:0.14 mm² - 1.5 mm², AWG: 26 - 16, width: 21 mm, color: gray, mounting type: NS 15 Why buy this product  Space-saving, thanks to the compact design  Flexible use, thanks to DIN rail and direct mounting  Space-saving potential distribution, thanks to compact micro potential distributors  Convenient test options, thanks to test openings at every terminal point  Clear arrangement thanks to marking of all terminal points Key Commercial Data Packing unit 1 STK Minimum order quantity 20 STK GTIN GTIN 4055626252131 Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 10 Potentials 1 Nominal cross section 1.5 mm² Color gray 05/03/2018   Page 1 / 9 https://www.phoenixcontact.com/us/products/3248168 Micro feed-through terminal block - MP 10X1,5 - 3248168 Technical data General Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 0.56 W Ambient temperature (operation) -60 °C ... 130 °C Maximum load current 17.5 A Nominal current IN 17.5 A Nominal voltage UN 500 V Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 7.3 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 1.5 mm² / 0.4 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 1.5 mm² Tractive force setpoint 40 N Result of tight fit on support Test passed Tight fit on carrier NS 15 Setpoint 1N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed 05/03/2018   Page 2 / 9 https://www.phoenixcontact.com/us/products/3248168 Micro feed-through terminal block - MP 10X1,5 - 3248168 Technical data General Short circuit stability result Test passed Conductor cross section short circuit testing 1.5 mm² Short-time current 0.18 kA Result of thermal test Test passed Ageing test for screwless modular terminal block temperature cycles 192 Proof of thermal characteristics (needle flame) effective duration 30 s Result of aging test Test passed Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 05/03/2018   Page 3 / 9 https://www.phoenixcontact.com/us/products/3248168 Micro feed-through terminal block - MP 10X1,5 - 3248168 Technical data General Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 21 mm Length 21 mm Height NS 15 27.2 mm Connection data Connection method Push-in connection Connection in acc. with standard IEC 60947-7-1/IEC 60947-7-2 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 16 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1.5 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 16 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm² Stripping length 8 mm ... 10 mm Internal cylindrical gage A1 / B1 Standards and Regulations Connection in acc. with standard IEC 60947-7-1/IEC 60947-7-2 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 05/03/2018   Page 4 / 9 https://www.phoenixcontact.com/us/products/3248168 Micro feed-through terminal block - MP 10X1,5 - 3248168 Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / CSA / VDE approval of drawings / IECEE CB Scheme / cULus Recognized Ex Approvals 05/03/2018   Page 5 / 9 https://www.phoenixcontact.com/us/products/3248168 Micro feed-through terminal block - MP 10X1,5 - 3248168 Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C D mm²/AWG/kcmil 26-14 26-14 26-14 Nominal current IN 15 A 15 A 15 A Nominal voltage UN 300 V 300 V 150 V cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C D mm²/AWG/kcmil 26-14 26-14 26-14 Nominal current IN 15 A 15 A 15 A Nominal voltage UN 300 V 300 V 150 V CSA    http://www.csagroup.org/services-industries/product-listing/   B C D mm²/AWG/kcmil 26-14 26-14 26-14 Nominal current IN 15 A 15 A 15 A Nominal voltage UN 300 V 300 V 150 V VDE approval of drawings    http://www.vde.com/en/Institute/OnlineService/ VDE-approved-products/Pages/Online-Search.aspx     mm²/AWG/kcmil 0.2-1.5 Nominal current IN 17.5 A Nominal voltage UN 500 V IECEE CB Scheme    http://www.iecee.org/  FILE E 60425  FILE E 60425  13631  40046781  DE1-59408 05/03/2018   Page 6 / 9 https://www.phoenixcontact.com/us/products/3248168 Micro feed-through terminal block - MP 10X1,5 - 3248168 Approvals cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories DIN rail DIN rail, unperforated - NS 15 UNPERF 2000MM - 1401695 DIN rail, unperforated, Standard profile, width: 15 mm, height: 5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 15 PERF 2000MM - 1401682 DIN rail perforated, Standard profile, width: 15 mm, height: 5.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 15 AL PERF 2000MM - 1401763 DIN rail perforated, Standard profile, width: 15 mm, height: 5.5 mm, in acc. with EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 15 WH PERF 2000MM - 1204096 DIN rail perforated, Standard profile, width: 15 mm, height: 5.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     End block 05/03/2018   Page 7 / 9 https://www.phoenixcontact.com/us/products/3248168 Micro feed-through terminal block - MP 10X1,5 - 3248168 Accessories End clamp - CLIPFIX 15 - 3022263 Snap-on end bracket, to be snapped onto NS 15 DIN rail     Labeled terminal marker Marking foil for zack marker strip - SK 3,8 REEL P4,15 WH CUS - 0825990 Marking foil for zack marker strip, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 4.15 mm, lettering field size: continuous x 3.8 mm     Screwdriver tools Screwdriver - SZF 0-0,4X2,5 - 1204504 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2component grip, with non-slip grip     Terminal marking Marking foil for zack marker strip - TML (EX3,8)R - 0801837 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30,000 x 3.8 mm     Marking foil for zack marker strip - TML (104X3,8)R - 0801833 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm     05/03/2018   Page 8 / 9 https://www.phoenixcontact.com/us/products/3248168 Micro feed-through terminal block - MP 10X1,5 - 3248168 Accessories Accessories - MPS-MT 1-S4-B RD - 1982800     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 05/03/2018   Page 9 / 9