3260052

https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block - PTPOWER 50-PE - 3260052 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Ground modular terminal block, Connection method: Power-Turn connection, Cross section: 10 mm² - 70 mm², AWG: 8 - 2/0, Width: 20 mm, Color: green-yellow, Mounting type: NS 35/15 Product Features  Quick and easy connection is now also possible for large conductors with the high-current terminal block  The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors  The compact design enables wiring in a confined space  In addition to using the existing test connection, pick-off terminal blocks can be connected, each of which can also accommodate two test cables   Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc Weight per Piece (excluding packing) 198.0 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 2 Nominal cross section 50 mm² Color green-yellow Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III 02/19/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block - PTPOWER 50-PE - 3260052 Technical data General Insulating material group I Connection in acc. with standard IEC 60947-7-1 Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 2, bogie mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Dimensions Width 20 mm Length 101 mm Height NS 35/15 105 mm Connection data Note Use an appropriate NS 35... copper or aluminum DIN rail for connection cross sections > 35 mm²/2 AWG. Connection method Power-Turn connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 10 mm² Conductor cross section solid max. 70 mm² Conductor cross section AWG min. 8 02/19/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block - PTPOWER 50-PE - 3260052 Technical data Connection data Conductor cross section AWG max. 2/0 Conductor cross section flexible min. 10 mm² Conductor cross section flexible max. 70 mm² Min. AWG conductor cross section, flexible 8 Max. AWG conductor cross section, flexible 2/0 Conductor cross section flexible, with ferrule without plastic sleeve min. 10 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 50 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 10 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 50 mm² Cross section with insertion bridge solid min. 10 mm² Cross section with insertion bridge, solid max. 50 mm² Cross section with insertion bridge stranded min. 10 mm² Cross section with insertion bridge, stranded max. 50 mm² Cross section with insertion bridge stranded, with ferrule without plastic sleeve min. 10 mm² Cross section with insertion bridge stranded, with ferrule without plastic sleeve max. 50 mm² Cross section with insertion bridge stranded, with ferrule without plastic sleeve min. 10 mm² Cross section with insertion bridge stranded, with ferrule with plastic sleeve 50 mm² max. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 10 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 16 mm² sleeve, max. Cross section with insertion bridge, solid max. 50 mm² Cross section with insertion bridge, stranded max. 50 mm² Stripping length 30 mm Internal cylindrical gage A10 Standards and Regulations Connection in acc. with standard IEC 60947-7-1 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 5.1 27141118 eCl@ss 6.0 27141141 eCl@ss 8.0 27141141 02/19/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block - PTPOWER 50-PE - 3260052 Classifications eCl@ss eCl@ss 9.0 27141141 ETIM ETIM 5.0 EC000901 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approvals submitted Approval details CSA    B C mm²/AWG/kcmil 8-1/0 8-1/0 Nominal voltage UN 600 V 1000 V UL Recognized      mm²/AWG/kcmil 8-1/0 Nominal voltage UN 1000 V 02/19/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block - PTPOWER 50-PE - 3260052 Approvals cUL Recognized    C mm²/AWG/kcmil 8-1/0 Nominal voltage UN 1000 V cULus Recognized  Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 02/19/2016   Page 5 / 5