https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
High-current terminal block, nom. voltage: 1000 V AC / 1500 V DC, nominal current: 150 A, connection method:
Power-Turn connection, number of connections: 2, number of positions: 1, cross section: 10 mm² - 70 mm²,
AWG: 8 - 2/0, width: 20 mm, color: blue, mounting type: direct screw connection
Your advantages
Quick and easy connection is now also possible for large conductors with the high-current terminal block
The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring
of conductors with ferrules or solid conductors
The compact design enables wiring in a confined space
In addition to using the existing test connection, pick-off terminal blocks can be connected, each of which can also accommodate two test cables
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
10 pc
GTIN
GTIN
4046356998048
Weight per Piece (excluding packing)
5.000 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of positions
1
Number of levels
1
Number of connections
2
Potentials
1
08/29/2019 Page 1 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Technical data
General
Nominal cross section
50 mm²
Color
blue
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
4.73 W
Designation
Level 1 above 1 below 1
Maximum load current
150 A (with 50 mm² conductor cross section)
Nominal current IN
150 A
Nominal voltage UN
1000 V AC
1500 V DC
Open side panel
No
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
20 mm
Length
101 mm
Height NS 35/15
105 mm
Connection data
08/29/2019 Page 2 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Technical data
Connection data
Connection
1 level
Connection method
Power-Turn connection
Stripping length
30 mm ... 32 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
10 mm²
Conductor cross section solid max.
70 mm²
Conductor cross section AWG min.
8
Conductor cross section AWG max.
2/0
Conductor cross section flexible min.
10 mm²
Conductor cross section flexible max.
70 mm²
Min. AWG conductor cross section, flexible
8
Max. AWG conductor cross section, flexible
2/0
Conductor cross section flexible, with ferrule without plastic sleeve min.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
50 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
50 mm²
Cross section with insertion bridge solid min.
10 mm²
Cross section with insertion bridge, solid max.
50 mm²
Cross section with insertion bridge stranded min.
10 mm²
Cross section with insertion bridge, stranded max.
50 mm²
Cross section with insertion bridge stranded, with ferrule without plastic
sleeve min.
10 mm²
Cross section with insertion bridge stranded, with ferrule without plastic
sleeve max.
50 mm²
Cross section with insertion bridge stranded, with ferrule without plastic
sleeve min.
10 mm²
Cross section with insertion bridge stranded, with ferrule with plastic sleeve
50 mm²
max.
Internal cylindrical gage
A10
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
08/29/2019 Page 3 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Technical data
Environmental Product Compliance
No hazardous substances above threshold values
Classifications
eCl@ss
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 5.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
DNV GL / CSA / BV / LR / UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized
Ex Approvals
Approval details
DNV GL
https://approvalfinder.dnvgl.com/
TAE00000Z9
08/29/2019 Page 4 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Approvals
CSA
http://www.csagroup.org/services-industries/product-listing/
B
C
Nominal voltage UN
600 V
1000 V
Nominal current IN
140 A
140 A
mm²/AWG/kcmil
8
8
13631
http://www.veristar.com/portal/veristarinfo/generalinfo/
approved/approvedProducts/equipmentAndMaterials
40933/A1 BV
LR
http://www.lr.org/en
15/20030
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
BV
Nominal voltage UN
1000 V
Nominal current IN
140 A
mm²/AWG/kcmil
8
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
C
Nominal voltage UN
1000 V
Nominal current IN
140 A
mm²/AWG/kcmil
8
EAC
FILE E 60425
RU CDE.A*30.B.01742
08/29/2019 Page 5 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Approvals
EAC
cULus Recognized
RU CDE.AI30.B.01102
Accessories
Accessories
Cable end sleeve
Ferrule - A 10 -32 - 1090629
Ferrule, length: 32 mm, color: silver
Ferrule - A 16 -32 - 1090633
Ferrule, length: 32 mm, color: silver
Ferrule - A 25 -32 - 1090636
Ferrule, length: 32 mm, color: silver
08/29/2019 Page 6 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
Ferrule - A 35 -32 - 1090638
Ferrule, length: 32 mm, color: silver
Ferrule - A 50 -32 - 1090639
Ferrule, length: 32 mm, color: silver
Crimping tool
Crimping pliers - CRIMPFOX CENTRUS 10S - 1213154
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX CENTRUS 10H - 1213156
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN
ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX 10S - 1212045
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.14 mm² ... 10 mm², unlockable pressure lock, lateral entry
08/29/2019 Page 7 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
Crimping pliers - CRIMPFOX 10 - 1212721
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 4 mm² ... 10 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 25R - 1212039
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 10 mm² ... 25 mm², lateral entry, WM crimp
Crimping pliers - CRIMPFOX 50R - 1212041
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 35 mm² ... 50 mm², lateral entry, WM crimp
Crimping pliers - CRIMPFOX-M - 1212072
Basic pliers, for accommodating dies for a wide range of type of contacts
Crimping pliers - CRIMPFOX-C120 - 1212318
Basic pliers, for accommodating dies for a wide range of type of contacts up to 120 mm²
DIN rail
08/29/2019 Page 8 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
08/29/2019 Page 9 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
End block
End clamp - E/AL-NS 35 - 1201662
End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm,
color: aluminum
08/29/2019 Page 10 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
Insertion bridge
Insertion bridge - EB 2-20/PT - 3260067
Insertion bridge, pitch: 20 mm, length: 64.5 mm, width: 35.3 mm, number of positions: 2, color: red
Insertion bridge - EB 3-20/PT - 3260068
Insertion bridge, pitch: 20 mm, length: 64.5 mm, width: 55.3 mm, number of positions: 3, color: red
Insulating sleeve
Insulating sleeve - PS-IH RD - 0311579
Insulating sleeve, color: red
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
08/29/2019 Page 11 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
08/29/2019 Page 12 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
08/29/2019 Page 13 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Labeled terminal marker
Marker for terminal blocks - TMT 10 R CUS - 0824500
Marker for terminal blocks, can be ordered: by line, white, labeled according to customer specifications, mounting type:
snap into universal marker groove, snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size:
6.35 x 10.15 mm
Zack marker strip - ZB 10 CUS - 0824941
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm
Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 991 ... 1000, mounting type: snap into tall marker groove, for terminal block width:
10.2 mm, lettering field size: 10.15 x 10.5 mm
08/29/2019 Page 14 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
Zack marker strip - ZB10,QR:FORTL.ZAHLEN - 1053027
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 991 ... 1000, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm,
lettering field size: 10.15 x 10.5 mm
Marker for terminal blocks - ZB10,LGS:L1-N,PE - 1053412
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm
Marker for terminal blocks - ZB10,LGS:U-N - 1053438
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: U, V, W, N, GND,
U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm
Marker for terminal blocks - UC-TM 10 CUS - 0824605
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 10 CUS - 0829623
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm
08/29/2019 Page 15 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
Zack Marker strip, flat - ZBF10 CUS - 0825031
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm
Zack Marker strip, flat - ZBF10,LGS:FORTL.ZAHLEN - 0810009
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 991 ...
1000, mounting type: snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm
Zack Marker strip, flat - ZBF10,QR:FORTL.ZAHLEN - 0810025
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 991 ...
1000, mounting type: snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm
Marker for terminal blocks - UC-TMF 10 CUS - 0824662
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 10 CUS - 0829679
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.4 x 4.7 mm
Pick-off terminal block
08/29/2019 Page 16 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
Pick-off terminal block - AGK 10-PTPOWER - 3260145
Pick-off terminal block, For use with PTPOWER 50, 95, 150, and 185 Power-Turn high-current terminal blocks, nom.
voltage: 1500 V, nominal current: 57 A, connection method: Push-in connection, number of connections: 2, cross section:
0.5 mm² - 16 mm², AWG: 20 - 6, width: 18.5 mm, height: 34.7 mm, color: gray, mounting type: on base element
Pick-off terminal block - AGK 10-PTPOWER BU - 3260148
Pick-off terminal block, For use with PTPOWER 50, 95, 150, and 185 Power-Turn high-current terminal blocks, nom.
voltage: 1500 V, nominal current: 57 A, connection method: Push-in connection, number of connections: 2, cross section:
0.5 mm² - 16 mm², AWG: 20 - 6, width: 18.5 mm, height: 34.7 mm, color: blue, mounting type: on base element
Pick-off terminal block - AGK 10-PTPOWER GN/YE - 3260151
Pick-off terminal block, For use with PTPOWER 50, 95, 150, and 185 Power-Turn high-current terminal blocks, nom.
voltage: 1500 V, nominal current: 57 A, connection method: Push-in connection, number of connections: 2, cross section:
0.5 mm² - 16 mm², AWG: 20 - 6, width: 18.5 mm, height: 34.7 mm, color: green/yellow, mounting type: on base element
Pick-off terminal block - AGK 10-PTPOWER BK/YE - 3260154
Pick-off terminal block, For use with PTPOWER 50, 95, 150, and 185 Power-Turn high-current terminal blocks, nom.
voltage: 1500 V, nominal current: 57 A, connection method: Push-in connection, number of connections: 2, cross section:
0.5 mm² - 16 mm², AWG: 20 - 6, width: 18.5 mm, height: 34.7 mm, color: black/yellow, mounting type: on base element
Planning and marking software
Software - CLIP-PROJECT ADVANCED - 5146040
Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.
08/29/2019 Page 17 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
Software - CLIP-PROJECT PROFESSIONAL - 5146053
Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and
labels for identifying terminal blocks, conductors and cables, and devices.
Screwdriver tools
Screwdriver - SZF 3-1,0X5,5 - 1206612
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 1.0 x 5.5 x 150 mm, 2component grip, with non-slip grip
Terminal marking
Marker for terminal blocks - TMT 10 R - 0816210
Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL
X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, perforated, mounting type:
snap into universal marker groove, snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size:
6.35 x 10.15 mm
Zack marker strip - ZB 10:UNBEDRUCKT - 1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm
Marker for terminal blocks - UC-TM 10 - 0818069
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 10.2 mm, lettering field size: 9.6 x 10.5 mm
08/29/2019 Page 18 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
Marker for terminal blocks - UCT-TM 10 - 0829142
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field
size: 8.9 x 9.6 mm
Zack Marker strip, flat - ZBF10:UNBEDRUCKT - 0809997
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm
Marker for terminal blocks - UC-TMF 10 - 0818124
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 10.2 mm, lettering field size: 9.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 10 - 0829204
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 10.2 mm, lettering field
size: 9.4 x 4.7 mm
Test plug terminal block
Test plugs - PS-MT - 0311647
Test plugs, color: silver
08/29/2019 Page 19 / 20
https://www.phoenixcontact.com/us/products/3260062
High-current terminal block - PTPOWER 50-F BU - 3260062
Accessories
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Test plugs - MPS-MT/ 4MM - 3048577
Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver
Warning label printed
Warning label - CEC PTPOWER 35/50 - 1056086
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
08/29/2019 Page 20 / 20
