https://www.phoenixcontact.com/us/products/3260148
Pick-off terminal block - AGK 10-PTPOWER BU - 3260148
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Pick-off terminal block, nom. voltage: 1500 V, nominal current: 57 A, connection method: Push-in connection,
number of connections: 2, cross section:0.5 mm² - 16 mm², AWG: 20 - 6, width: 18.5 mm, height: 34.7 mm, color:
blue, mounting type: on base element
Why buy this product
The fully insulated, optional use pick-off terminal block enables voltage pick-off
Large-surface marking
Pick-off terminal block, for snapping into the lateral guide
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
10 STK
GTIN
GTIN
4046356779081
Weight per Piece (excluding packing)
22.000 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Note
For use with PTPOWER 50, 95, and 150 Power-Turn high-current terminal
blocks
Number of levels
1
Number of connections
2
Potentials
1
Nominal cross section
10 mm²
07/15/2018 Page 1 / 11
https://www.phoenixcontact.com/us/products/3260148
Pick-off terminal block - AGK 10-PTPOWER BU - 3260148
Technical data
General
Color
blue
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
1.82 W
Maximum load current
57 A (with 16 mm² conductor cross section)
Nominal current IN
57 A
Nominal voltage UN
1500 V
Open side panel
No
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
18.5 mm
Length
35 mm
Height
34.7 mm
Connection data
Connection method
Push-in connection
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
16 mm²
07/15/2018 Page 2 / 11
https://www.phoenixcontact.com/us/products/3260148
Pick-off terminal block - AGK 10-PTPOWER BU - 3260148
Technical data
Connection data
Conductor cross section AWG min.
20
Conductor cross section AWG max.
6
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
10 mm²
Min. AWG conductor cross section, flexible
20
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
1.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
4 mm²
sleeve, max.
Stripping length
18 mm
Internal cylindrical gage
A6
Standards and Regulations
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Classifications
eCl@ss
eCl@ss 4.0
27141131
eCl@ss 4.1
27141131
eCl@ss 5.0
27141131
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141151
eCl@ss 8.0
27141151
eCl@ss 9.0
27141151
07/15/2018 Page 3 / 11
https://www.phoenixcontact.com/us/products/3260148
Pick-off terminal block - AGK 10-PTPOWER BU - 3260148
Classifications
ETIM
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC002021
ETIM 6.0
EC002021
UNSPSC
UNSPSC 6.01
30211812
UNSPSC 7.0901
39121410
UNSPSC 11
39121411
UNSPSC 12.01
39121411
UNSPSC 13.2
39121402
Approvals
Approvals
Approvals
CSA
Ex Approvals
IECEx / ATEX / EAC Ex
Approval details
CSA
http://www.csagroup.org/services-industries/product-listing/
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
57 A
57 A
mm²/AWG/kcmil
20-6
20-6
13631
Accessories
Accessories
Insulating sleeve
07/15/2018 Page 4 / 11
https://www.phoenixcontact.com/us/products/3260148
Pick-off terminal block - AGK 10-PTPOWER BU - 3260148
Accessories
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
07/15/2018 Page 5 / 11
https://www.phoenixcontact.com/us/products/3260148
Pick-off terminal block - AGK 10-PTPOWER BU - 3260148
Accessories
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Labeled terminal marker
Zack marker strip - ZB 10 CUS - 0824941
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm
Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 - 10, 11 - 20, etc. up to 991 - 1000, mounting type: snap into tall marker groove, for terminal block width: 10.2
mm, lettering field size: 10.15 x 10.5 mm
Zack marker strip - ZB10,QR:FORTL.ZAHLEN - 1053027
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 - 10, 11 - 20, etc. up to 991 - 1000, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm,
lettering field size: 10.15 x 10.5 mm
07/15/2018 Page 6 / 11
https://www.phoenixcontact.com/us/products/3260148
Pick-off terminal block - AGK 10-PTPOWER BU - 3260148
Accessories
Zack marker strip - ZB10,LGS:GLEICHE ZAHLEN - 1053030
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers
1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm
Marker for terminal blocks - ZB10,LGS:L1-N,PE - 1053412
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm
Marker for terminal blocks - ZB10,LGS:U-N - 1053438
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: U, V, W, N, GND,
U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm
Marker for terminal blocks - UC-TM 10 CUS - 0824605
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 10 CUS - 0829623
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm
07/15/2018 Page 7 / 11
https://www.phoenixcontact.com/us/products/3260148
Pick-off terminal block - AGK 10-PTPOWER BU - 3260148
Accessories
Zack Marker strip, flat - ZBF10 CUS - 0825031
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm
Zack Marker strip, flat - ZBF10,LGS:FORTL.ZAHLEN - 0810009
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 991 1000, mounting type: snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm
Zack Marker strip, flat - ZBF10,QR:FORTL.ZAHLEN - 0810025
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 - 10, 11 - 20, etc. up to 991 - 1000,
mounting type: snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm
Marker for terminal blocks - UC-TMF 10 CUS - 0824662
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 10 CUS - 0829679
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.4 x 4.7 mm
Screwdriver tools
07/15/2018 Page 8 / 11
https://www.phoenixcontact.com/us/products/3260148
Pick-off terminal block - AGK 10-PTPOWER BU - 3260148
Accessories
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB 10:UNBEDRUCKT - 1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm
Marker for terminal blocks - UC-TM 10 - 0818069
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR,
BLUEMARK CLED, BLUEMARK LED, CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for
terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 10 - 0829142
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK ID, BLUEMARK ID COLOR, BLUEMARK CLED, BLUEMARK LED, TOPMARK NEO, mounting
type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm
Zack Marker strip, flat - ZBF10:UNBEDRUCKT - 0809997
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm
07/15/2018 Page 9 / 11
https://www.phoenixcontact.com/us/products/3260148
Pick-off terminal block - AGK 10-PTPOWER BU - 3260148
Accessories
Marker for terminal blocks - UC-TMF 10 - 0818124
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR,
BLUEMARK CLED, BLUEMARK LED, CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for
terminal block width: 10.2 mm, lettering field size: 9.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 10 - 0829204
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK ID, BLUEMARK ID COLOR, BLUEMARK CLED, BLUEMARK LED, TOPMARK NEO, mounting
type: snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.4 x 4.7 mm
Marker for terminal blocks - TMT (EX9,5)R - 0828295
Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL
X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: snap into universal marker groove,
snap into tall marker groove, for terminal block width: 50000 mm, lettering field size: 9.5 x 50000 mm
Marker for terminal blocks - US-TM 100 - 0829255
Marker for terminal blocks, Card, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD,
BLUEMARK ID, BLUEMARK ID COLOR, mounting type: snap into universal marker groove, for terminal block width: 104
mm, lettering field size: 104 x 9.8 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
, rated voltage (III/2): , nominal current (Ex): , nominal voltage (Ex): , number of positions: 1, pitch: 5 mm, connection
method: , mounting: ,
07/15/2018 Page 10 / 11
https://www.phoenixcontact.com/us/products/3260148
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
07/15/2018 Page 11 / 11
